lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231206063549.2590305-1-srasheed@marvell.com>
Date: Tue, 5 Dec 2023 22:35:49 -0800
From: Shinas Rasheed <srasheed@...vell.com>
To: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <hgani@...vell.com>, <vimleshk@...vell.com>, <egallen@...hat.com>,
        <mschmidt@...hat.com>, <pabeni@...hat.com>, <horms@...nel.org>,
        <kuba@...nel.org>, <davem@...emloft.net>, <wizhao@...hat.com>,
        <konguyen@...hat.com>, Shinas Rasheed <srasheed@...vell.com>,
        "Veerasenareddy
 Burru" <vburru@...vell.com>,
        Sathesh Edara <sedara@...vell.com>,
        Eric Dumazet
	<edumazet@...gle.com>,
        Abhijit Ayarekar <aayarekar@...vell.com>,
        "Satananda
 Burla" <sburla@...vell.com>
Subject: [PATCH net v1] octeon_ep: explicitly test for firmware ready value

The firmware ready value is 1, and get firmware ready status
function should explicitly test for that value. The firmware
ready value read will be 2 after driver load, and on unbind
till firmware rewrites the firmware ready back to 0, the value
seen by driver will be 2, which should be regarded as not ready.

Fixes: 10c073e40469 ("octeon_ep: defer probe if firmware not ready")
Signed-off-by: Shinas Rasheed <srasheed@...vell.com>
---
 drivers/net/ethernet/marvell/octeon_ep/octep_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
index 552970c7dec0..b8ae269f6f97 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
@@ -1258,7 +1258,8 @@ static bool get_fw_ready_status(struct pci_dev *pdev)
 
 		pci_read_config_byte(pdev, (pos + 8), &status);
 		dev_info(&pdev->dev, "Firmware ready status = %u\n", status);
-		return status;
+#define FW_STATUS_READY 1ULL
+		return (status == FW_STATUS_READY) ? true : false;
 	}
 	return false;
 }
-- 
2.25.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ