| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 5 Dec 2023 17:01:02 -0800
From: Jesse Brandeburg <jesse.brandeburg@...el.com>
To: intel-wired-lan@...ts.osuosl.org
Cc: Jesse Brandeburg <jesse.brandeburg@...el.com>,
netdev@...r.kernel.org,
aleksander.lobakin@...el.com,
przemyslaw.kitszel@...el.com,
horms@...nel.org,
marcin.szycik@...ux.intel.com,
Julia Lawall <Julia.Lawall@...ia.fr>
Subject: [PATCH iwl-next v2 03/15] intel: legacy: field prep conversion
Refactor several older Intel drivers to use FIELD_PREP(), which reduces
lines of code and adds clarity of intent.
This code was generated by the following coccinelle/spatch script and
then manually repaired.
@prep2@
constant shift,mask;
type T;
expression a;
@@
-(((T)(a) << shift) & mask)
+FIELD_PREP(mask, a)
@prep@
constant shift,mask;
type T;
expression a;
@@
-((T)((a) << shift) & mask)
+FIELD_PREP(mask, a)
Cc: Julia Lawall <Julia.Lawall@...ia.fr>
Reviewed-by: Marcin Szycik <marcin.szycik@...ux.intel.com>
Reviewed-by: Simon Horman <horms@...nel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@...el.com>
---
v2: updated commit message with new script
---
drivers/net/ethernet/intel/e1000e/80003es2lan.c | 7 +++----
drivers/net/ethernet/intel/e1000e/phy.c | 7 +++----
drivers/net/ethernet/intel/fm10k/fm10k_pf.c | 3 +--
drivers/net/ethernet/intel/igb/e1000_phy.c | 4 ++--
drivers/net/ethernet/intel/igb/igb_ethtool.c | 3 +--
drivers/net/ethernet/intel/igb/igb_main.c | 9 +++------
drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c | 4 ++--
8 files changed, 16 insertions(+), 23 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
index 74671201208e..31fce3e4e8af 100644
--- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c
+++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
@@ -1210,8 +1210,8 @@ static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
if (ret_val)
return ret_val;
- kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
- E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
+ kmrnctrlsta = FIELD_PREP(E1000_KMRNCTRLSTA_OFFSET, offset) |
+ E1000_KMRNCTRLSTA_REN;
ew32(KMRNCTRLSTA, kmrnctrlsta);
e1e_flush();
@@ -1245,8 +1245,7 @@ static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
if (ret_val)
return ret_val;
- kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
- E1000_KMRNCTRLSTA_OFFSET) | data;
+ kmrnctrlsta = FIELD_PREP(E1000_KMRNCTRLSTA_OFFSET, offset) | data;
ew32(KMRNCTRLSTA, kmrnctrlsta);
e1e_flush();
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index 08c3d477dd6f..2498f021eb02 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -463,8 +463,8 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
return ret_val;
}
- kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
- E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
+ kmrnctrlsta = FIELD_PREP(E1000_KMRNCTRLSTA_OFFSET, offset) |
+ E1000_KMRNCTRLSTA_REN;
ew32(KMRNCTRLSTA, kmrnctrlsta);
e1e_flush();
@@ -536,8 +536,7 @@ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
return ret_val;
}
- kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
- E1000_KMRNCTRLSTA_OFFSET) | data;
+ kmrnctrlsta = FIELD_PREP(E1000_KMRNCTRLSTA_OFFSET, offset) | data;
ew32(KMRNCTRLSTA, kmrnctrlsta);
e1e_flush();
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
index ae700a1807c6..1eea0ec5dbcf 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
@@ -866,8 +866,7 @@ static s32 fm10k_iov_assign_default_mac_vlan_pf(struct fm10k_hw *hw,
* register is RO from the VF, so the PF must do this even in the
* case of notifying the VF of a new VID via the mailbox.
*/
- txqctl = ((u32)vf_vid << FM10K_TXQCTL_VID_SHIFT) &
- FM10K_TXQCTL_VID_MASK;
+ txqctl = FIELD_PREP(FM10K_TXQCTL_VID_MASK, vf_vid);
txqctl |= (vf_idx << FM10K_TXQCTL_TC_SHIFT) |
FM10K_TXQCTL_VF | vf_idx;
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
index 3c1b562a3271..c84e7356cdb1 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -255,7 +255,7 @@ s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data)
}
/* Need to byte-swap the 16-bit value. */
- *data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00);
+ *data = ((i2ccmd >> 8) & 0x00FF) | FIELD_PREP(0xFF00, i2ccmd);
return 0;
}
@@ -282,7 +282,7 @@ s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data)
}
/* Swap the data bytes for the I2C interface */
- phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00);
+ phy_data_swapped = ((data >> 8) & 0x00FF) | FIELD_PREP(0xFF00, data);
/* Set up Op-code, Phy Address, and register address in the I2CCMD
* register. The MAC will take care of interfacing with the
diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index 16d2a55d5e17..f03977f2323e 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -2713,8 +2713,7 @@ static int igb_rxnfc_write_etype_filter(struct igb_adapter *adapter,
etqf |= (etype & E1000_ETQF_ETYPE_MASK);
etqf &= ~E1000_ETQF_QUEUE_MASK;
- etqf |= ((input->action << E1000_ETQF_QUEUE_SHIFT)
- & E1000_ETQF_QUEUE_MASK);
+ etqf |= FIELD_PREP(E1000_ETQF_QUEUE_MASK, input->action);
etqf |= E1000_ETQF_QUEUE_ENABLE;
wr32(E1000_ETQF(i), etqf);
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index b2295caa2f0a..897eb36bb609 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -9810,8 +9810,7 @@ static void igb_set_vf_rate_limit(struct e1000_hw *hw, int vf, int tx_rate,
tx_rate;
bcnrc_val = E1000_RTTBCNRC_RS_ENA;
- bcnrc_val |= ((rf_int << E1000_RTTBCNRC_RF_INT_SHIFT) &
- E1000_RTTBCNRC_RF_INT_MASK);
+ bcnrc_val |= FIELD_PREP(E1000_RTTBCNRC_RF_INT_MASK, rf_int);
bcnrc_val |= (rf_dec & E1000_RTTBCNRC_RF_DEC_MASK);
} else {
bcnrc_val = 0;
@@ -10000,8 +9999,7 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba)
hwm = 64 * (pba - 6);
reg = rd32(E1000_FCRTC);
reg &= ~E1000_FCRTC_RTH_COAL_MASK;
- reg |= ((hwm << E1000_FCRTC_RTH_COAL_SHIFT)
- & E1000_FCRTC_RTH_COAL_MASK);
+ reg |= FIELD_PREP(E1000_FCRTC_RTH_COAL_MASK, hwm);
wr32(E1000_FCRTC, reg);
/* Set the DMA Coalescing Rx threshold to PBA - 2 * max
@@ -10010,8 +10008,7 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba)
dmac_thr = pba - 10;
reg = rd32(E1000_DMACR);
reg &= ~E1000_DMACR_DMACTHR_MASK;
- reg |= ((dmac_thr << E1000_DMACR_DMACTHR_SHIFT)
- & E1000_DMACR_DMACTHR_MASK);
+ reg |= FIELD_PREP(E1000_DMACR_DMACTHR_MASK, dmac_thr);
/* transition to L0x or L1 if available..*/
reg |= (E1000_DMACR_DMAC_EN | E1000_DMACR_DMAC_LX_MASK);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index 100388968e4d..0470b69d834c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -794,7 +794,7 @@ static s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
rar_high &= ~IXGBE_RAH_VIND_MASK;
- rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK);
+ rar_high |= FIELD_PREP(IXGBE_RAH_VIND_MASK, vmdq);
IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
return 0;
}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
index 7311bd545acf..18d63c8c2ff4 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
@@ -670,8 +670,8 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
int fcoe_i_h = fcoe->offset + ((i + fcreta_size) %
fcoe->indices);
fcoe_q_h = adapter->rx_ring[fcoe_i_h]->reg_idx;
- fcoe_q_h = (fcoe_q_h << IXGBE_FCRETA_ENTRY_HIGH_SHIFT) &
- IXGBE_FCRETA_ENTRY_HIGH_MASK;
+ fcoe_q_h = FIELD_PREP(IXGBE_FCRETA_ENTRY_HIGH_MASK,
+ fcoe_q_h);
}
fcoe_i = fcoe->offset + (i % fcoe->indices);
--
2.39.3
Powered by blists - more mailing lists