[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8caf8252-4068-4d17-b919-12adfef074e5@kernel.org>
Date: Fri, 8 Dec 2023 12:13:23 +0200
From: Roger Quadros <rogerq@...nel.org>
To: Vladimir Oltean <vladimir.oltean@....com>
Cc: davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
pabeni@...hat.com, s-vadapalli@...com, r-gunasekaran@...com,
vigneshr@...com, srk@...com, horms@...nel.org, p-varis@...com,
netdev@...r.kernel.org
Subject: Re: [PATCH v7 net-next 6/8] net: ethernet: ti: am65-cpsw-qos: Add
Frame Preemption MAC Merge support
On 04/12/2023 14:35, Vladimir Oltean wrote:
> On Fri, Dec 01, 2023 at 03:58:00PM +0200, Roger Quadros wrote:
>> Add driver support for viewing / changing the MAC Merge sublayer
>> parameters and seeing the verification state machine's current state
>> via ethtool.
>>
>> As hardware does not support interrupt notification for verification
>> events we resort to polling on link up. On link up we try a couple of
>> times for verification success and if unsuccessful then give up.
>>
>> The Frame Preemption feature is described in the Technical Reference
>> Manual [1] in section:
>> 12.3.1.4.6.7 Intersperced Express Traffic (IET – P802.3br/D2.0)
>>
>> Due to Silicon Errata i2208 [2] we set limit min IET fragment size to 124.
>>
>> [1] AM62x TRM - https://www.ti.com/lit/ug/spruiv7a/spruiv7a.pdf
>> [2] AM62x Silicon Errata - https://www.ti.com/lit/er/sprz487c/sprz487c.pdf
>>
>> Signed-off-by: Roger Quadros <rogerq@...nel.org>
>> ---
>
> Actually...
>
> ld.lld: error: undefined symbol: am65_cpsw_iet_common_enable
>>>> referenced by am65-cpsw-ethtool.c:755 (drivers/net/ethernet/ti/am65-cpsw-ethtool.c:755)
>>>> drivers/net/ethernet/ti/am65-cpsw-ethtool.o:(am65_cpsw_set_mm) in archive vmlinux.a
>
> ld.lld: error: undefined symbol: am65_cpsw_iet_commit_preemptible_tcs
>>>> referenced by am65-cpsw-ethtool.c:876 (drivers/net/ethernet/ti/am65-cpsw-ethtool.c:876)
>>>> drivers/net/ethernet/ti/am65-cpsw-ethtool.o:(am65_cpsw_set_mm) in archive vmlinux.a
>
> cat $KBUILD_OUTPUT/.config | grep AM65
> CONFIG_TI_K3_AM65_CPSW_NUSS=y
> # CONFIG_TI_K3_AM65_CPSW_SWITCHDEV is not set
> # CONFIG_TI_K3_AM65_CPTS is not set
> CONFIG_MMC_SDHCI_AM654=y
> CONFIG_PHY_AM654_SERDES=m
>
> am65-cpsw-qos.c is built only if CONFIG_TI_AM65_CPSW_TAS is enabled, yet am65-cpsw-ethtool.c,
> built by CONFIG_TI_K3_AM65_CPSW_NUSS, depends on it.
Wondering how to fix this the right way. Should set/get_mm fail if CONFIG_TI_AM65_CPSW_TAS is not enabled?
--
cheers,
-roger
Powered by blists - more mailing lists