[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <hycvlka3sdsbpgq6al2wsqaqnaczvz5stxicjuxntsbfo6kzgj@evunbox7qcct>
Date: Fri, 8 Dec 2023 10:52:34 +0000
From: Alvin Šipraga <ALSI@...g-olufsen.dk>
To: Luiz Angelo Daros de Luca <luizluca@...il.com>
CC: "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linus.walleij@...aro.org" <linus.walleij@...aro.org>, "andrew@...n.ch"
<andrew@...n.ch>, "f.fainelli@...il.com" <f.fainelli@...il.com>,
"olteanv@...il.com" <olteanv@...il.com>, "davem@...emloft.net"
<davem@...emloft.net>, "edumazet@...gle.com" <edumazet@...gle.com>,
"kuba@...nel.org" <kuba@...nel.org>, "pabeni@...hat.com" <pabeni@...hat.com>,
"arinc.unal@...nc9.com" <arinc.unal@...nc9.com>
Subject: Re: [PATCH net-next 4/7] net: dsa: realtek: create realtek-common
On Fri, Dec 08, 2023 at 01:41:40AM -0300, Luiz Angelo Daros de Luca wrote:
> Some code can be shared between both interface modules (MDIO and SMI)
> and among variants. Currently, these interface functions are shared:
>
> - realtek_common_lock
> - realtek_common_unlock
> - realtek_common_probe
> - realtek_common_remove
>
> The reset during probe was moved to the last moment before a variant
> detects the switch. This way, we avoid a reset if anything else fails.
>
> Signed-off-by: Luiz Angelo Daros de Luca <luizluca@...il.com>
> Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
> ---
> drivers/net/dsa/realtek/Makefile | 1 +
> drivers/net/dsa/realtek/realtek-common.c | 136 +++++++++++++++++++++++
> drivers/net/dsa/realtek/realtek-common.h | 16 +++
> drivers/net/dsa/realtek/realtek-mdio.c | 121 ++------------------
> drivers/net/dsa/realtek/realtek-smi.c | 124 +++------------------
> drivers/net/dsa/realtek/realtek.h | 6 +-
> drivers/net/dsa/realtek/rtl8365mb.c | 9 +-
> drivers/net/dsa/realtek/rtl8366rb.c | 9 +-
> 8 files changed, 194 insertions(+), 228 deletions(-)
> create mode 100644 drivers/net/dsa/realtek/realtek-common.c
> create mode 100644 drivers/net/dsa/realtek/realtek-common.h
>
> diff --git a/drivers/net/dsa/realtek/Makefile b/drivers/net/dsa/realtek/Makefile
> index 0aab57252a7c..5e0c1ef200a3 100644
> --- a/drivers/net/dsa/realtek/Makefile
> +++ b/drivers/net/dsa/realtek/Makefile
> @@ -1,4 +1,5 @@
> # SPDX-License-Identifier: GPL-2.0
> +obj-$(CONFIG_NET_DSA_REALTEK) += realtek-common.o
No corresponding Kconfig change?
> obj-$(CONFIG_NET_DSA_REALTEK_MDIO) += realtek-mdio.o
> obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek-smi.o
> obj-$(CONFIG_NET_DSA_REALTEK_RTL8366RB) += rtl8366.o
> diff --git a/drivers/net/dsa/realtek/realtek-common.c b/drivers/net/dsa/realtek/realtek-common.c
> new file mode 100644
> index 000000000000..75b6aa071990
> --- /dev/null
> +++ b/drivers/net/dsa/realtek/realtek-common.c
> @@ -0,0 +1,136 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +
> +#include <linux/module.h>
> +
> +#include "realtek.h"
> +#include "realtek-common.h"
> +
> +void realtek_common_lock(void *ctx)
> +{
> + struct realtek_priv *priv = ctx;
> +
> + mutex_lock(&priv->map_lock);
> +}
> +EXPORT_SYMBOL_GPL(realtek_common_lock);
> +
> +void realtek_common_unlock(void *ctx)
> +{
> + struct realtek_priv *priv = ctx;
> +
> + mutex_unlock(&priv->map_lock);
> +}
> +EXPORT_SYMBOL_GPL(realtek_common_unlock);
> +
> +struct realtek_priv *
> +realtek_common_probe_pre(struct device *dev, struct regmap_config rc,
> + struct regmap_config rc_nolock)
> +{
> + const struct realtek_variant *var;
> + struct realtek_priv *priv;
> + struct device_node *np;
> + int ret;
> +
> + var = of_device_get_match_data(dev);
> + if (!var)
> + return ERR_PTR(-EINVAL);
> +
> + priv = devm_kzalloc(dev, size_add(sizeof(*priv), var->chip_data_sz),
> + GFP_KERNEL);
> + if (!priv)
> + return ERR_PTR(-ENOMEM);
> +
> + mutex_init(&priv->map_lock);
> +
> + rc.lock_arg = priv;
> + priv->map = devm_regmap_init(dev, NULL, priv, &rc);
> + if (IS_ERR(priv->map)) {
> + ret = PTR_ERR(priv->map);
> + dev_err(dev, "regmap init failed: %d\n", ret);
> + return ERR_PTR(ret);
> + }
> +
> + priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc_nolock);
> + if (IS_ERR(priv->map_nolock)) {
> + ret = PTR_ERR(priv->map_nolock);
> + dev_err(dev, "regmap init failed: %d\n", ret);
> + return ERR_PTR(ret);
> + }
> +
> + /* Link forward and backward */
> + priv->dev = dev;
> + priv->variant = var;
> + priv->ops = var->ops;
> + priv->chip_data = (void *)priv + sizeof(*priv);
> +
> + dev_set_drvdata(dev, priv);
> + spin_lock_init(&priv->lock);
> +
> + np = dev->of_node;
This is kind of a pointless variable, just do
of_property_read_bool(dev->of_node, ...) below.
> +
> + priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds");
> +
> + /* TODO: if power is software controlled, set up any regulators here */
> +
> + priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(priv->reset)) {
> + dev_err(dev, "failed to get RESET GPIO\n");
> + return ERR_CAST(priv->reset);
> + }
> + if (priv->reset) {
> + gpiod_set_value(priv->reset, 1);
> + dev_dbg(dev, "asserted RESET\n");
> + msleep(REALTEK_HW_STOP_DELAY);
> + gpiod_set_value(priv->reset, 0);
> + msleep(REALTEK_HW_START_DELAY);
> + dev_dbg(dev, "deasserted RESET\n");
> + }
> +
> + return priv;
> +}
> +EXPORT_SYMBOL(realtek_common_probe_pre);
> +
> +int realtek_common_probe_post(struct realtek_priv *priv)
> +{
> + int ret;
> +
> + ret = priv->ops->detect(priv);
> + if (ret) {
> + dev_err(priv->dev, "unable to detect switch\n");
dev_err_probe()?
> + return ret;
> + }
> +
> + priv->ds = devm_kzalloc(priv->dev, sizeof(*priv->ds), GFP_KERNEL);
> + if (!priv->ds)
> + return -ENOMEM;
I guess this could actually just be embedded in realtek_priv and then
you don't need to allocate it dynamically here.
> +
> + priv->ds->priv = priv;
> + priv->ds->dev = priv->dev;
> + priv->ds->ops = priv->ds_ops;
> + priv->ds->num_ports = priv->num_ports;
> +
> + ret = dsa_register_switch(priv->ds);
> + if (ret) {
> + dev_err_probe(priv->dev, ret, "unable to register switch\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(realtek_common_probe_post);
> +
> +void realtek_common_remove(struct realtek_priv *priv)
> +{
> + if (!priv)
> + return;
> +
> + dsa_unregister_switch(priv->ds);
> +
> + /* leave the device reset asserted */
> + if (priv->reset)
> + gpiod_set_value(priv->reset, 1);
> +}
> +EXPORT_SYMBOL(realtek_common_remove);
> +
> +MODULE_AUTHOR("Luiz Angelo Daros de Luca <luizluca@...il.com>");
> +MODULE_DESCRIPTION("Realtek DSA switches common module");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/net/dsa/realtek/realtek-common.h b/drivers/net/dsa/realtek/realtek-common.h
> new file mode 100644
> index 000000000000..405bd0d85d2b
> --- /dev/null
> +++ b/drivers/net/dsa/realtek/realtek-common.h
> @@ -0,0 +1,16 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +
> +#ifndef _REALTEK_INTERFACE_H
> +#define _REALTEK_INTERFACE_H
> +
> +#include <linux/regmap.h>
> +
> +void realtek_common_lock(void *ctx);
> +void realtek_common_unlock(void *ctx);
> +struct realtek_priv *
> +realtek_common_probe_pre(struct device *dev, struct regmap_config rc,
> + struct regmap_config rc_nolock);
> +int realtek_common_probe_post(struct realtek_priv *priv);
Maybe it is worth describing what these functions do with a comment.
pre: sets up driver private data struct, sets up regmaps, issues
hardware reset
post: registers the dsa switch, calls detect() and then expects
priv->num_ports to be set
The detect() function in itself is a bit funny. Maybe it's not even
necessary. Both chip variants set a static num_ports value anyway. You
can maybe dump detect() completely and move that code into the
variant-specific probe between the calls to common_probe_{pre,post}().
> +void realtek_common_remove(struct realtek_priv *priv);
> +
> +#endif
#endif /* _REALTEK_INTERFACE_H */
Actually shouldn't it be _REALTEK_COMMON_H?
> diff --git a/drivers/net/dsa/realtek/realtek-mdio.c b/drivers/net/dsa/realtek/realtek-mdio.c
> index 58966d0625c8..4c9a744b72f8 100644
> --- a/drivers/net/dsa/realtek/realtek-mdio.c
> +++ b/drivers/net/dsa/realtek/realtek-mdio.c
> @@ -26,6 +26,7 @@
>
> #include "realtek.h"
> #include "realtek-mdio.h"
> +#include "realtek-common.h"
>
> /* Read/write via mdiobus */
> #define REALTEK_MDIO_CTRL0_REG 31
> @@ -100,20 +101,6 @@ static int realtek_mdio_read(void *ctx, u32 reg, u32 *val)
> return ret;
> }
>
> -static void realtek_mdio_lock(void *ctx)
> -{
> - struct realtek_priv *priv = ctx;
> -
> - mutex_lock(&priv->map_lock);
> -}
> -
> -static void realtek_mdio_unlock(void *ctx)
> -{
> - struct realtek_priv *priv = ctx;
> -
> - mutex_unlock(&priv->map_lock);
> -}
> -
> static const struct regmap_config realtek_mdio_regmap_config = {
> .reg_bits = 10, /* A4..A0 R4..R0 */
> .val_bits = 16,
> @@ -124,8 +111,8 @@ static const struct regmap_config realtek_mdio_regmap_config = {
> .reg_read = realtek_mdio_read,
> .reg_write = realtek_mdio_write,
> .cache_type = REGCACHE_NONE,
> - .lock = realtek_mdio_lock,
> - .unlock = realtek_mdio_unlock,
> + .lock = realtek_common_lock,
> + .unlock = realtek_common_unlock,
> };
>
> static const struct regmap_config realtek_mdio_nolock_regmap_config = {
> @@ -143,98 +130,21 @@ static const struct regmap_config realtek_mdio_nolock_regmap_config = {
>
> int realtek_mdio_probe(struct mdio_device *mdiodev)
> {
> - struct realtek_priv *priv;
> struct device *dev = &mdiodev->dev;
> - const struct realtek_variant *var;
> - struct regmap_config rc;
> - struct device_node *np;
> - int ret;
> -
> - var = of_device_get_match_data(dev);
> - if (!var)
> - return -EINVAL;
> -
> - priv = devm_kzalloc(&mdiodev->dev,
> - size_add(sizeof(*priv), var->chip_data_sz),
> - GFP_KERNEL);
> - if (!priv)
> - return -ENOMEM;
> -
> - mutex_init(&priv->map_lock);
> -
> - rc = realtek_mdio_regmap_config;
> - rc.lock_arg = priv;
> - priv->map = devm_regmap_init(dev, NULL, priv, &rc);
> - if (IS_ERR(priv->map)) {
> - ret = PTR_ERR(priv->map);
> - dev_err(dev, "regmap init failed: %d\n", ret);
> - return ret;
> - }
> + struct realtek_priv *priv;
>
> - rc = realtek_mdio_nolock_regmap_config;
> - priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc);
> - if (IS_ERR(priv->map_nolock)) {
> - ret = PTR_ERR(priv->map_nolock);
> - dev_err(dev, "regmap init failed: %d\n", ret);
> - return ret;
> - }
> + priv = realtek_common_probe_pre(dev, realtek_mdio_regmap_config,
> + realtek_mdio_nolock_regmap_config);
> + if (IS_ERR(priv))
> + return PTR_ERR(priv);
>
> - priv->mdio_addr = mdiodev->addr;
> priv->bus = mdiodev->bus;
> - priv->dev = &mdiodev->dev;
> - priv->chip_data = (void *)priv + sizeof(*priv);
> -
> - priv->clk_delay = var->clk_delay;
> - priv->cmd_read = var->cmd_read;
> - priv->cmd_write = var->cmd_write;
> - priv->ops = var->ops;
> -
> + priv->mdio_addr = mdiodev->addr;
> priv->write_reg_noack = realtek_mdio_write;
> + priv->ds_ops = priv->variant->ds_ops_mdio;
>
> - np = dev->of_node;
> -
> - dev_set_drvdata(dev, priv);
> -
> - /* TODO: if power is software controlled, set up any regulators here */
> - priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds");
> -
> - priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> - if (IS_ERR(priv->reset)) {
> - dev_err(dev, "failed to get RESET GPIO\n");
> - return PTR_ERR(priv->reset);
> - }
> -
> - if (priv->reset) {
> - gpiod_set_value(priv->reset, 1);
> - dev_dbg(dev, "asserted RESET\n");
> - msleep(REALTEK_HW_STOP_DELAY);
> - gpiod_set_value(priv->reset, 0);
> - msleep(REALTEK_HW_START_DELAY);
> - dev_dbg(dev, "deasserted RESET\n");
> - }
> -
> - ret = priv->ops->detect(priv);
> - if (ret) {
> - dev_err(dev, "unable to detect switch\n");
> - return ret;
> - }
> -
> - priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL);
> - if (!priv->ds)
> - return -ENOMEM;
> -
> - priv->ds->dev = dev;
> - priv->ds->num_ports = priv->num_ports;
> - priv->ds->priv = priv;
> - priv->ds->ops = var->ds_ops_mdio;
> -
> - ret = dsa_register_switch(priv->ds);
> - if (ret) {
> - dev_err(priv->dev, "unable to register switch ret = %d\n", ret);
> - return ret;
> - }
> + return realtek_common_probe_post(priv);
>
> - return 0;
> }
> EXPORT_SYMBOL_GPL(realtek_mdio_probe);
>
> @@ -242,14 +152,7 @@ void realtek_mdio_remove(struct mdio_device *mdiodev)
> {
> struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev);
>
> - if (!priv)
> - return;
> -
> - dsa_unregister_switch(priv->ds);
> -
> - /* leave the device reset asserted */
> - if (priv->reset)
> - gpiod_set_value(priv->reset, 1);
> + realtek_common_remove(priv);
> }
> EXPORT_SYMBOL_GPL(realtek_mdio_remove);
>
> diff --git a/drivers/net/dsa/realtek/realtek-smi.c b/drivers/net/dsa/realtek/realtek-smi.c
> index 55586d158c0e..246024eec3bd 100644
> --- a/drivers/net/dsa/realtek/realtek-smi.c
> +++ b/drivers/net/dsa/realtek/realtek-smi.c
> @@ -41,12 +41,13 @@
>
> #include "realtek.h"
> #include "realtek-smi.h"
> +#include "realtek-common.h"
>
> #define REALTEK_SMI_ACK_RETRY_COUNT 5
>
> static inline void realtek_smi_clk_delay(struct realtek_priv *priv)
> {
> - ndelay(priv->clk_delay);
> + ndelay(priv->variant->clk_delay);
> }
>
> static void realtek_smi_start(struct realtek_priv *priv)
> @@ -209,7 +210,7 @@ static int realtek_smi_read_reg(struct realtek_priv *priv, u32 addr, u32 *data)
> realtek_smi_start(priv);
>
> /* Send READ command */
> - ret = realtek_smi_write_byte(priv, priv->cmd_read);
> + ret = realtek_smi_write_byte(priv, priv->variant->cmd_read);
> if (ret)
> goto out;
>
> @@ -250,7 +251,7 @@ static int realtek_smi_write_reg(struct realtek_priv *priv,
> realtek_smi_start(priv);
>
> /* Send WRITE command */
> - ret = realtek_smi_write_byte(priv, priv->cmd_write);
> + ret = realtek_smi_write_byte(priv, priv->variant->cmd_write);
> if (ret)
> goto out;
>
> @@ -311,20 +312,6 @@ static int realtek_smi_read(void *ctx, u32 reg, u32 *val)
> return realtek_smi_read_reg(priv, reg, val);
> }
>
> -static void realtek_smi_lock(void *ctx)
> -{
> - struct realtek_priv *priv = ctx;
> -
> - mutex_lock(&priv->map_lock);
> -}
> -
> -static void realtek_smi_unlock(void *ctx)
> -{
> - struct realtek_priv *priv = ctx;
> -
> - mutex_unlock(&priv->map_lock);
> -}
> -
> static const struct regmap_config realtek_smi_regmap_config = {
> .reg_bits = 10, /* A4..A0 R4..R0 */
> .val_bits = 16,
> @@ -335,8 +322,8 @@ static const struct regmap_config realtek_smi_regmap_config = {
> .reg_read = realtek_smi_read,
> .reg_write = realtek_smi_write,
> .cache_type = REGCACHE_NONE,
> - .lock = realtek_smi_lock,
> - .unlock = realtek_smi_unlock,
> + .lock = realtek_common_lock,
> + .unlock = realtek_common_unlock,
> };
>
> static const struct regmap_config realtek_smi_nolock_regmap_config = {
> @@ -411,100 +398,28 @@ static int realtek_smi_setup_mdio(struct dsa_switch *ds)
>
> int realtek_smi_probe(struct platform_device *pdev)
> {
> - const struct realtek_variant *var;
> struct device *dev = &pdev->dev;
> struct realtek_priv *priv;
> - struct regmap_config rc;
> - struct device_node *np;
> - int ret;
> -
> - var = of_device_get_match_data(dev);
> - np = dev->of_node;
> -
> - priv = devm_kzalloc(dev, sizeof(*priv) + var->chip_data_sz, GFP_KERNEL);
> - if (!priv)
> - return -ENOMEM;
> - priv->chip_data = (void *)priv + sizeof(*priv);
> -
> - mutex_init(&priv->map_lock);
> -
> - rc = realtek_smi_regmap_config;
> - rc.lock_arg = priv;
> - priv->map = devm_regmap_init(dev, NULL, priv, &rc);
> - if (IS_ERR(priv->map)) {
> - ret = PTR_ERR(priv->map);
> - dev_err(dev, "regmap init failed: %d\n", ret);
> - return ret;
> - }
> -
> - rc = realtek_smi_nolock_regmap_config;
> - priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc);
> - if (IS_ERR(priv->map_nolock)) {
> - ret = PTR_ERR(priv->map_nolock);
> - dev_err(dev, "regmap init failed: %d\n", ret);
> - return ret;
> - }
> -
> - /* Link forward and backward */
> - priv->dev = dev;
> - priv->clk_delay = var->clk_delay;
> - priv->cmd_read = var->cmd_read;
> - priv->cmd_write = var->cmd_write;
> - priv->ops = var->ops;
> -
> - priv->setup_interface = realtek_smi_setup_mdio;
> - priv->write_reg_noack = realtek_smi_write_reg_noack;
> -
> - dev_set_drvdata(dev, priv);
> - spin_lock_init(&priv->lock);
>
> - /* TODO: if power is software controlled, set up any regulators here */
> -
> - priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> - if (IS_ERR(priv->reset)) {
> - dev_err(dev, "failed to get RESET GPIO\n");
> - return PTR_ERR(priv->reset);
> - }
> - if (priv->reset) {
> - gpiod_set_value(priv->reset, 1);
> - dev_dbg(dev, "asserted RESET\n");
> - msleep(REALTEK_HW_STOP_DELAY);
> - gpiod_set_value(priv->reset, 0);
> - msleep(REALTEK_HW_START_DELAY);
> - dev_dbg(dev, "deasserted RESET\n");
> - }
> + priv = realtek_common_probe_pre(dev, realtek_smi_regmap_config,
> + realtek_smi_nolock_regmap_config);
> + if (IS_ERR(priv))
> + return PTR_ERR(priv);
>
> /* Fetch MDIO pins */
> priv->mdc = devm_gpiod_get_optional(dev, "mdc", GPIOD_OUT_LOW);
> if (IS_ERR(priv->mdc))
> return PTR_ERR(priv->mdc);
> +
> priv->mdio = devm_gpiod_get_optional(dev, "mdio", GPIOD_OUT_LOW);
> if (IS_ERR(priv->mdio))
> return PTR_ERR(priv->mdio);
>
> - priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds");
> -
> - ret = priv->ops->detect(priv);
> - if (ret) {
> - dev_err(dev, "unable to detect switch\n");
> - return ret;
> - }
> -
> - priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL);
> - if (!priv->ds)
> - return -ENOMEM;
> -
> - priv->ds->dev = dev;
> - priv->ds->num_ports = priv->num_ports;
> - priv->ds->priv = priv;
> + priv->write_reg_noack = realtek_smi_write_reg_noack;
> + priv->setup_interface = realtek_smi_setup_mdio;
> + priv->ds_ops = priv->variant->ds_ops_smi;
>
> - priv->ds->ops = var->ds_ops_smi;
> - ret = dsa_register_switch(priv->ds);
> - if (ret) {
> - dev_err_probe(dev, ret, "unable to register switch\n");
> - return ret;
> - }
> - return 0;
> + return realtek_common_probe_post(priv);
ret = realtek_common_probe_post(priv);
if (ret)
return ret;
return 0;
> }
> EXPORT_SYMBOL_GPL(realtek_smi_probe);
>
> @@ -512,14 +427,7 @@ void realtek_smi_remove(struct platform_device *pdev)
> {
> struct realtek_priv *priv = platform_get_drvdata(pdev);
>
> - if (!priv)
> - return;
> -
> - dsa_unregister_switch(priv->ds);
> -
> - /* leave the device reset asserted */
> - if (priv->reset)
> - gpiod_set_value(priv->reset, 1);
> + realtek_common_remove(priv);
> }
> EXPORT_SYMBOL_GPL(realtek_smi_remove);
>
> diff --git a/drivers/net/dsa/realtek/realtek.h b/drivers/net/dsa/realtek/realtek.h
> index e9ee778665b2..fbd0616c1df3 100644
> --- a/drivers/net/dsa/realtek/realtek.h
> +++ b/drivers/net/dsa/realtek/realtek.h
> @@ -58,11 +58,9 @@ struct realtek_priv {
> struct mii_bus *bus;
> int mdio_addr;
>
> - unsigned int clk_delay;
> - u8 cmd_read;
> - u8 cmd_write;
> spinlock_t lock; /* Locks around command writes */
> struct dsa_switch *ds;
> + const struct dsa_switch_ops *ds_ops;
> struct irq_domain *irqdomain;
> bool leds_disabled;
>
> @@ -79,6 +77,8 @@ struct realtek_priv {
> int vlan_enabled;
> int vlan4k_enabled;
>
> + const struct realtek_variant *variant;
> +
> char buf[4096];
> void *chip_data; /* Per-chip extra variant data */
> };
> diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c
> index 526bf98cef1d..ac848b965f84 100644
> --- a/drivers/net/dsa/realtek/rtl8365mb.c
> +++ b/drivers/net/dsa/realtek/rtl8365mb.c
> @@ -103,6 +103,7 @@
> #include "realtek.h"
> #include "realtek-smi.h"
> #include "realtek-mdio.h"
> +#include "realtek-common.h"
>
> /* Family-specific data and limits */
> #define RTL8365MB_PHYADDRMAX 7
> @@ -691,7 +692,7 @@ static int rtl8365mb_phy_ocp_read(struct realtek_priv *priv, int phy,
> u32 val;
> int ret;
>
> - mutex_lock(&priv->map_lock);
> + realtek_common_lock(priv);
>
> ret = rtl8365mb_phy_poll_busy(priv);
> if (ret)
> @@ -724,7 +725,7 @@ static int rtl8365mb_phy_ocp_read(struct realtek_priv *priv, int phy,
> *data = val & 0xFFFF;
>
> out:
> - mutex_unlock(&priv->map_lock);
> + realtek_common_unlock(priv);
>
> return ret;
> }
> @@ -735,7 +736,7 @@ static int rtl8365mb_phy_ocp_write(struct realtek_priv *priv, int phy,
> u32 val;
> int ret;
>
> - mutex_lock(&priv->map_lock);
> + realtek_common_lock(priv);
>
> ret = rtl8365mb_phy_poll_busy(priv);
> if (ret)
> @@ -766,7 +767,7 @@ static int rtl8365mb_phy_ocp_write(struct realtek_priv *priv, int phy,
> goto out;
>
> out:
> - mutex_unlock(&priv->map_lock);
> + realtek_common_unlock(priv);
>
> return 0;
> }
> diff --git a/drivers/net/dsa/realtek/rtl8366rb.c b/drivers/net/dsa/realtek/rtl8366rb.c
> index 09c17de19457..1cc4de3cf54f 100644
> --- a/drivers/net/dsa/realtek/rtl8366rb.c
> +++ b/drivers/net/dsa/realtek/rtl8366rb.c
> @@ -24,6 +24,7 @@
> #include "realtek.h"
> #include "realtek-smi.h"
> #include "realtek-mdio.h"
> +#include "realtek-common.h"
>
> #define RTL8366RB_PORT_NUM_CPU 5
> #define RTL8366RB_NUM_PORTS 6
> @@ -1707,7 +1708,7 @@ static int rtl8366rb_phy_read(struct realtek_priv *priv, int phy, int regnum)
> if (phy > RTL8366RB_PHY_NO_MAX)
> return -EINVAL;
>
> - mutex_lock(&priv->map_lock);
> + realtek_common_lock(priv);
>
> ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG,
> RTL8366RB_PHY_CTRL_READ);
> @@ -1735,7 +1736,7 @@ static int rtl8366rb_phy_read(struct realtek_priv *priv, int phy, int regnum)
> phy, regnum, reg, val);
>
> out:
> - mutex_unlock(&priv->map_lock);
> + realtek_common_unlock(priv);
>
> return ret;
> }
> @@ -1749,7 +1750,7 @@ static int rtl8366rb_phy_write(struct realtek_priv *priv, int phy, int regnum,
> if (phy > RTL8366RB_PHY_NO_MAX)
> return -EINVAL;
>
> - mutex_lock(&priv->map_lock);
> + realtek_common_lock(priv);
>
> ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG,
> RTL8366RB_PHY_CTRL_WRITE);
> @@ -1766,7 +1767,7 @@ static int rtl8366rb_phy_write(struct realtek_priv *priv, int phy, int regnum,
> goto out;
>
> out:
> - mutex_unlock(&priv->map_lock);
> + realtek_common_unlock(priv);
>
> return ret;
> }
> --
> 2.43.0
>
Powered by blists - more mailing lists