netdev - [PATCH net-next v1 1/1] net: dl2k: Use proper conversion of dev

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date: Fri,  8 Dec 2023 17:33:27 +0200
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
	netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Cc: "David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	kernel test robot <lkp@...el.com>
Subject: [PATCH net-next v1 1/1] net: dl2k: Use proper conversion of dev_addr before IO to device

The driver is using iowriteXX()/ioreadXX() APIs which are LE IO
accessors simplified as

  1. Convert given value _from_ CPU _to_ LE
  2. Write it to the device as is

The dev_addr is a byte stream, but because the driver uses 16-bit
IO accessors, it wants to perform double conversion on BE CPUs,
but it took it wrong, as it effectivelly does two times _from_ CPU
_to_ LE. What it has to do is to consider dev_addr as an array of
LE16 and hence do _from_ LE _to_ CPU conversion, followed by implied
_from_ CPU _to_ LE in the iowrite16().

To achieve that, use get_unaligned_le16(). This will make it correct
and allows to avoid sparse warning as reported by LKP.

Reported-by: kernel test robot <lkp@...el.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312030058.hfZPTXd7-lkp@intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
---
 drivers/net/ethernet/dlink/dl2k.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c
index db6615aa921b..7bfeae04b52b 100644
--- a/drivers/net/ethernet/dlink/dl2k.c
+++ b/drivers/net/ethernet/dlink/dl2k.c
@@ -565,8 +565,7 @@ static void rio_hw_init(struct net_device *dev)
 	 * too. However, it doesn't work on IP1000A so we use 16-bit access.
 	 */
 	for (i = 0; i < 3; i++)
-		dw16(StationAddr0 + 2 * i,
-		     cpu_to_le16(((const u16 *)dev->dev_addr)[i]));
+		dw16(StationAddr0 + 2 * i, get_unaligned_le16(&dev->dev_addr[2 * i]));
 
 	set_multicast (dev);
 	if (np->coalesce) {
-- 
2.43.0.rc1.1.gbec44491f096