lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Mon, 11 Dec 2023 23:33:44 +0100
From: Tobias Waldekranz <tobias@...dekranz.com>
To: davem@...emloft.net,
	kuba@...nel.org
Cc: andrew@...n.ch,
	f.fainelli@...il.com,
	olteanv@...il.com,
	netdev@...r.kernel.org
Subject: [PATCH v3 net-next 6/8] net: dsa: mv88e6xxx: Limit histogram counters to ingress traffic

Chips in this family only has one set of histogram counters, which can
be used to count ingressing and/or egressing traffic. mv88e6xxx has,
up until this point, kept the hardware default of counting both
directions.

In the mean time, standard counter group support has been added to
ethtool. Via that interface, drivers may report ingress-only and
egress-only histograms separately - but not combined.

In order for mv88e6xxx to maximalize amount of diagnostic information
that can be exported via standard interfaces, we opt to limit the
histogram counters to ingress traffic only. Which will allow us to
export them via the standard "rmon" group in an upcoming commit.

The reason for choosing ingress-only over egress-only, is to be
compatible with RFC2819 (RMON MIB).

Signed-off-by: Tobias Waldekranz <tobias@...dekranz.com>
---
 drivers/net/dsa/mv88e6xxx/chip.c    | 6 +++---
 drivers/net/dsa/mv88e6xxx/global1.c | 7 +++----
 2 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 6f1f71cb0de5..a3bd12ceba7b 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -1221,7 +1221,7 @@ static size_t mv88e6095_stats_get_stat(struct mv88e6xxx_chip *chip, int port,
 		return 0;
 
 	*data = _mv88e6xxx_get_ethtool_stat(chip, stat, port, 0,
-					    MV88E6XXX_G1_STATS_OP_HIST_RX_TX);
+					    MV88E6XXX_G1_STATS_OP_HIST_RX);
 	return 1;
 }
 
@@ -1233,7 +1233,7 @@ static size_t mv88e6250_stats_get_stat(struct mv88e6xxx_chip *chip, int port,
 		return 0;
 
 	*data = _mv88e6xxx_get_ethtool_stat(chip, stat, port, 0,
-					    MV88E6XXX_G1_STATS_OP_HIST_RX_TX);
+					    MV88E6XXX_G1_STATS_OP_HIST_RX);
 	return 1;
 }
 
@@ -1246,7 +1246,7 @@ static size_t mv88e6320_stats_get_stat(struct mv88e6xxx_chip *chip, int port,
 
 	*data = _mv88e6xxx_get_ethtool_stat(chip, stat, port,
 					    MV88E6XXX_G1_STATS_OP_BANK_1_BIT_9,
-					    MV88E6XXX_G1_STATS_OP_HIST_RX_TX);
+					    MV88E6XXX_G1_STATS_OP_HIST_RX);
 	return 1;
 }
 
diff --git a/drivers/net/dsa/mv88e6xxx/global1.c b/drivers/net/dsa/mv88e6xxx/global1.c
index 174c773b38c2..49444a72ff09 100644
--- a/drivers/net/dsa/mv88e6xxx/global1.c
+++ b/drivers/net/dsa/mv88e6xxx/global1.c
@@ -462,8 +462,7 @@ int mv88e6390_g1_rmu_disable(struct mv88e6xxx_chip *chip)
 int mv88e6390_g1_stats_set_histogram(struct mv88e6xxx_chip *chip)
 {
 	return mv88e6xxx_g1_ctl2_mask(chip, MV88E6390_G1_CTL2_HIST_MODE_MASK,
-				      MV88E6390_G1_CTL2_HIST_MODE_RX |
-				      MV88E6390_G1_CTL2_HIST_MODE_TX);
+				      MV88E6390_G1_CTL2_HIST_MODE_RX);
 }
 
 int mv88e6xxx_g1_set_device_number(struct mv88e6xxx_chip *chip, int index)
@@ -491,7 +490,7 @@ int mv88e6095_g1_stats_set_histogram(struct mv88e6xxx_chip *chip)
 	if (err)
 		return err;
 
-	val |= MV88E6XXX_G1_STATS_OP_HIST_RX_TX;
+	val |= MV88E6XXX_G1_STATS_OP_HIST_RX;
 
 	err = mv88e6xxx_g1_write(chip, MV88E6XXX_G1_STATS_OP, val);
 
@@ -506,7 +505,7 @@ int mv88e6xxx_g1_stats_snapshot(struct mv88e6xxx_chip *chip, int port)
 	err = mv88e6xxx_g1_write(chip, MV88E6XXX_G1_STATS_OP,
 				 MV88E6XXX_G1_STATS_OP_BUSY |
 				 MV88E6XXX_G1_STATS_OP_CAPTURE_PORT |
-				 MV88E6XXX_G1_STATS_OP_HIST_RX_TX | port);
+				 MV88E6XXX_G1_STATS_OP_HIST_RX | port);
 	if (err)
 		return err;
 
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ