[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Tue, 12 Dec 2023 13:54:17 +0100
From: Maxime Chevallier <maxime.chevallier@...tlin.com>
To: Luo Jie <quic_luoj@...cinc.com>
Cc: <agross@...nel.org>, <andersson@...nel.org>, <konrad.dybcio@...aro.org>,
<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
<andrew@...n.ch>, <hkallweit1@...il.com>, <linux@...linux.org.uk>,
<robert.marko@...tura.hr>, <linux-arm-msm@...r.kernel.org>,
<netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <quic_srichara@...cinc.com>
Subject: Re: [PATCH v2 3/5] net: mdio: ipq4019: configure CMN PLL clock for
ipq5332
Hello,
I have some more minor comments for yoi :)
On Tue, 12 Dec 2023 19:51:48 +0800
Luo Jie <quic_luoj@...cinc.com> wrote:
> The reference clock of CMN PLL block is selectable, the internal
> 48MHZ is used by default.
>
> The output clock of CMN PLL block is for providing the clock
> source of ethernet device(such as qca8084), there are 1 * 25MHZ
> and 3 * 50MHZ output clocks available for the ethernet devices.
>
> Signed-off-by: Luo Jie <quic_luoj@...cinc.com>
> ---
[...]
> +/* For the CMN PLL block, the reference clock can be configured according to
> + * the device tree property "cmn-reference-clock", the internal 48MHZ is used
> + * by default on the ipq533 platform.
> + *
> + * The output clock of CMN PLL block is provided to the ethernet devices,
> + * threre are 4 CMN PLL output clocks (1*25MHZ + 3*50MHZ) enabled by default.
> + *
> + * Such as the output 50M clock for the qca8084 ethernet PHY.
> + */
> +static int ipq_cmn_clock_config(struct mii_bus *bus)
> +{
> + int ret;
> + u32 reg_val, src_sel, ref_clk;
> + struct ipq4019_mdio_data *priv;
Here you should also use reverse christmas-tree notation
[...]
> @@ -317,6 +441,17 @@ static int ipq4019_mdio_probe(struct platform_device *pdev)
> }
> }
>
> + /* The CMN block resource is for providing clock source to ethernet,
> + * which can be optionally configured on the platform ipq9574 and
> + * ipq5332.
> + */
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cmn_blk");
> + if (res) {
> + priv->cmn_membase = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(priv->cmn_membase))
> + return PTR_ERR(priv->cmn_membase);
> + }
> +
And here you can simplify a bit by using
devm_platform_ioremap_resource_byname()
Thanks,
Maxime
Powered by blists - more mailing lists