[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <b286f5f9ced51c72e9e33941a95f2986ca6902a2.1702458672.git.siyanteng@loongson.cn>
Date: Wed, 13 Dec 2023 18:15:01 +0800
From: Yanteng Si <siyanteng@...ngson.cn>
To: andrew@...n.ch,
hkallweit1@...il.com,
peppe.cavallaro@...com,
alexandre.torgue@...s.st.com,
joabreu@...opsys.com
Cc: Yanteng Si <siyanteng@...ngson.cn>,
fancer.lancer@...il.com,
Jose.Abreu@...opsys.com,
chenhuacai@...ngson.cn,
linux@...linux.org.uk,
guyinggang@...ngson.cn,
netdev@...r.kernel.org,
loongarch@...ts.linux.dev,
chris.chenfeiyang@...il.com
Subject: [PATCH v6 8/9] net: stmmac: dwmac-loongson: Disable flow control for GMAC
Loongson GMAC does not support Flow Control feature. Set flags to
disable it.
Signed-off-by: Yanteng Si <siyanteng@...ngson.cn>
Signed-off-by: Feiyang Chen <chenfeiyang@...ngson.cn>
Signed-off-by: Yinggang Gu <guyinggang@...ngson.cn>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c | 2 ++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++---
include/linux/stmmac.h | 1 +
3 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index 9e4953c7e4e0..77c9bcb66a8e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -160,6 +160,8 @@ static int loongson_gmac_config(struct pci_dev *pdev,
break;
}
+ plat->flags |= FIELD_PREP(STMMAC_FLAG_DISABLE_FLOW_CONTROL, 1);
+
return ret;
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 9764d2ab7e46..d94f61742772 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1236,9 +1236,9 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
xpcs_get_interfaces(priv->hw->xpcs,
priv->phylink_config.supported_interfaces);
- priv->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
- MAC_10FD | MAC_100FD |
- MAC_1000FD;
+ priv->phylink_config.mac_capabilities = MAC_10FD | MAC_100FD | MAC_1000FD;
+ if (!FIELD_GET(STMMAC_FLAG_DISABLE_FLOW_CONTROL, priv->plat->flags))
+ priv->phylink_config.mac_capabilities |= MAC_ASYM_PAUSE | MAC_SYM_PAUSE;
stmmac_set_half_duplex(priv);
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 067030cdb60f..5ece92e4d8c3 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -224,6 +224,7 @@ struct dwmac4_addrs {
#define STMMAC_FLAG_HAS_LGMAC BIT(13)
#define STMMAC_FLAG_DISABLE_HALF_DUPLEX BIT(14)
#define STMMAC_FLAG_DISABLE_FORCE_1000 BIT(15)
+#define STMMAC_FLAG_DISABLE_FLOW_CONTROL BIT(16)
struct plat_stmmacenet_data {
int bus_id;
--
2.31.4
Powered by blists - more mailing lists