[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231213220827.1311772-2-anthony.l.nguyen@intel.com>
Date: Wed, 13 Dec 2023 14:08:25 -0800
From: Tony Nguyen <anthony.l.nguyen@...el.com>
To: davem@...emloft.net,
kuba@...nel.org,
pabeni@...hat.com,
edumazet@...gle.com,
netdev@...r.kernel.org
Cc: Michal Schmidt <mschmidt@...hat.com>,
anthony.l.nguyen@...el.com,
Przemek Kitszel <przemyslaw.kitszel@...el.com>,
Simon Horman <horms@...nel.org>,
Pucha Himasekhar Reddy <himasekharx.reddy.pucha@...el.com>
Subject: [PATCH net 1/2] ice: fix theoretical out-of-bounds access in ethtool link modes
From: Michal Schmidt <mschmidt@...hat.com>
To map phy types reported by the hardware to ethtool link mode bits,
ice uses two lookup tables (phy_type_low_lkup, phy_type_high_lkup).
The "low" table has 64 elements to cover every possible bit the hardware
may report, but the "high" table has only 13. If the hardware reports a
higher bit in phy_types_high, the driver would access memory beyond the
lookup table's end.
Instead of iterating through all 64 bits of phy_types_{low,high}, use
the sizes of the respective lookup tables.
Fixes: 9136e1f1e5c3 ("ice: refactor PHY type to ethtool link mode")
Signed-off-by: Michal Schmidt <mschmidt@...hat.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@...el.com>
Reviewed-by: Simon Horman <horms@...nel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@...el.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@...el.com>
---
drivers/net/ethernet/intel/ice/ice_ethtool.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index a34083567e6f..bde9bc74f928 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -1850,14 +1850,14 @@ ice_phy_type_to_ethtool(struct net_device *netdev,
linkmode_zero(ks->link_modes.supported);
linkmode_zero(ks->link_modes.advertising);
- for (i = 0; i < BITS_PER_TYPE(u64); i++) {
+ for (i = 0; i < ARRAY_SIZE(phy_type_low_lkup); i++) {
if (phy_types_low & BIT_ULL(i))
ice_linkmode_set_bit(&phy_type_low_lkup[i], ks,
req_speeds, advert_phy_type_lo,
i);
}
- for (i = 0; i < BITS_PER_TYPE(u64); i++) {
+ for (i = 0; i < ARRAY_SIZE(phy_type_high_lkup); i++) {
if (phy_types_high & BIT_ULL(i))
ice_linkmode_set_bit(&phy_type_high_lkup[i], ks,
req_speeds, advert_phy_type_hi,
--
2.41.0
Powered by blists - more mailing lists