| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <740e01bc-456a-48ba-8ef6-13c4d00d8e93@tuxon.dev>
Date: Thu, 14 Dec 2023 14:57:45 +0200
From: claudiu beznea <claudiu.beznea@...on.dev>
To: Niklas Söderlund <niklas.soderlund+renesas@...natech.se>
Cc: s.shtylyov@....ru, davem@...emloft.net, edumazet@...gle.com,
kuba@...nel.org, pabeni@...hat.com, claudiu.beznea.uj@...renesas.com,
yoshihiro.shimoda.uh@...esas.com, wsa+renesas@...g-engineering.com,
biju.das.jz@...renesas.com, prabhakar.mahadev-lad.rj@...renesas.com,
mitsuhiro.kimura.kc@...esas.com, geert+renesas@...der.be,
netdev@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH net 1/2] net: ravb: Wait for operation mode to be applied
On 14.12.2023 14:39, Niklas Söderlund wrote:
> On 2023-12-14 14:25:57 +0200, claudiu beznea wrote:
>> Hi, Niklas,
>>
>> On 14.12.2023 14:11, Niklas Söderlund wrote:
>>> Hi Claudiu,
>>>
>>> Thanks for your patch.
>>>
>>> On 2023-12-14 13:31:36 +0200, Claudiu wrote:
>>>> From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
>>>>
>>>> CSR.OPS bits specify the current operating mode and (according to
>>>> documentation) they are updated when the operating mode change request
>>>> is processed. Thus, check CSR.OPS before proceeding.
>>>>
>>>> Fixes: 568b3ce7a8ef ("ravb: factor out register bit twiddling code")
>>>> Fixes: 0184165b2f42 ("ravb: add sleep PM suspend/resume support")
>>>> Fixes: 7e09a052dc4e ("ravb: Exclude gPTP feature support for RZ/G2L")
>>>> Fixes: 3e3d647715d4 ("ravb: add wake-on-lan support via magic packet")
>>>> Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
>>>
>>> I think the list of fixes tags can be reduced. The last item in the list
>>> is the patch which adds the RAVB driver so what's the point of listing
>>> the rest?
>>
>> In commit c156633f1353 ("Renesas Ethernet AVB driver proper") different
>> features that were touched by the rest of commits in the fixes list might
>> not be present. So, it might be possible that this patch to not be
>> back-portable to c156633f1353 ("Renesas Ethernet AVB driver proper") but to
>> other commits in the list.
>
> All the other commits depends on commit c156633f1353 ("Renesas Ethernet
> AVB driver proper"). It would be hard to add wake-on-lan to a driver
> that do not exists :-)
>
> I do not feel strongly about this so keep it as if if you wish, I just
> think it looks odd.
I usually add here all the blamed commits. I can change it, I don't have
nothing against, this is how I did it till now.
>
>>
>>>
>>>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
>>>> ---
>>>> drivers/net/ethernet/renesas/ravb_main.c | 47 ++++++++++++++++++++----
>>>> 1 file changed, 39 insertions(+), 8 deletions(-)
>>>>
>>>> diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
>>>> index 9178f6d60e74..ce95eb5af354 100644
>>>> --- a/drivers/net/ethernet/renesas/ravb_main.c
>>>> +++ b/drivers/net/ethernet/renesas/ravb_main.c
>>>> @@ -683,8 +683,11 @@ static int ravb_dmac_init(struct net_device *ndev)
>>>>
>>>> /* Setting the control will start the AVB-DMAC process. */
>>>> ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_OPERATION);
>>>> + error = ravb_wait(ndev, CSR, CSR_OPS, CSR_OPS_OPERATION);
>>>> + if (error)
>>>> + netdev_err(ndev, "failed to switch device to operation mode\n");
>>>
>>> As you add ravb_set_reset_mode() to compliment the existing
>>> ravb_set_config_mode(), would it not be coherent to also add a
>>> ravb_set_operation_mode() instead of open coding it here?
>>
>> CSR_OPS_OPERATION is set only in this place. Reset is done in more than one
>> place. Due to this I've added a function for it.
>
> OK. Then maybe add a generic change mode operation like rswitch do in
> rswitch_gwca_change_mode() ? That way you ensure any future mode changes
> will always confirm the change is successful ? I'm a but worried that
ravb_set_config_mode() does things depending on gPTP, CCC_GAC.
ravb_set_reset_mode() just set CCC_OPC and goes out. Doing it like this
will move logic out of ravb_set_config_mode() (AFAICT) which will lead to
even complicated code (AFAICT).
On top of that there is also ravb_config()... Maybe this one could be
merged with ravb_set_reset_mode()...
> future changes might forget to add the ravb_wait() to confirm a mode
> change is successful and a good helper could avoid that.
Review should help with this. There are other bits in other registers that
needs polling.
>
>>
>>>
>>>>
>>>> - return 0;
>>>> + return error;
>>>> }
>>>>
>>>> static void ravb_get_tx_tstamp(struct net_device *ndev)
>>>> @@ -1744,6 +1747,18 @@ static inline int ravb_hook_irq(unsigned int irq, irq_handler_t handler,
>>>> return error;
>>>> }
>>>>
>>>> +static int ravb_set_reset_mode(struct net_device *ndev)
>>>
>>> nit: Maybe move this to be close to ravb_set_config_mode() to co-locate
>>> all mode changing logic?
>>
>> I've did this but not in this patch. It could be found on the final version
>> of the driver proposed by
>> https://lore.kernel.org/all/20231214114600.2451162-1-claudiu.beznea.uj@bp.renesas.com/
>
> Why not add it in the final intended location straight away then moving
> it around in a later patch?
I guess it was easier when formatted the patches (ones in this series and
the ones at [1]).
> This just makes the later patch harder to
> review as it moves more code around.
>
>>
>> Thank you for your review,
>> Claudiu Beznea
>>
>>>
>>>> +{
>>>> + int error;
>>>> +
>>>> + ravb_write(ndev, CCC_OPC_RESET, CCC);
>>>> + error = ravb_wait(ndev, CSR, CSR_OPS, CSR_OPS_RESET);
>>>> + if (error)
>>>> + netdev_err(ndev, "failed to switch device to reset mode\n");
>>>> +
>>>> + return error;
>>>> +}
>>>> +
>>>> /* Network device open function for Ethernet AVB */
>>>> static int ravb_open(struct net_device *ndev)
>>>> {
>>>> @@ -2551,10 +2566,11 @@ static int ravb_set_gti(struct net_device *ndev)
>>>> return 0;
>>>> }
>>>>
>>>> -static void ravb_set_config_mode(struct net_device *ndev)
>>>> +static int ravb_set_config_mode(struct net_device *ndev)
>>>> {
>>>> struct ravb_private *priv = netdev_priv(ndev);
>>>> const struct ravb_hw_info *info = priv->info;
>>>> + int error;
>>>>
>>>> if (info->gptp) {
>>>> ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_CONFIG);
>>>> @@ -2566,6 +2582,12 @@ static void ravb_set_config_mode(struct net_device *ndev)
>>>> } else {
>>>> ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_CONFIG);
>>>> }
>>>> +
>>>> + error = ravb_wait(ndev, CSR, CSR_OPS, CSR_OPS_CONFIG);
>>>> + if (error)
>>>> + netdev_err(ndev, "failed to switch device to config mode\n");
>>>> +
>>>> + return error;
>>>> }
>>>>
>>>> /* Set tx and rx clock internal delay modes */
>>>> @@ -2785,7 +2807,9 @@ static int ravb_probe(struct platform_device *pdev)
>>>> ndev->ethtool_ops = &ravb_ethtool_ops;
>>>>
>>>> /* Set AVB config mode */
>>>> - ravb_set_config_mode(ndev);
>>>> + error = ravb_set_config_mode(ndev);
>>>> + if (error)
>>>> + goto out_disable_refclk;
>>>>
>>>> if (info->gptp || info->ccc_gac) {
>>>> /* Set GTI value */
>>>> @@ -2893,6 +2917,7 @@ static void ravb_remove(struct platform_device *pdev)
>>>> struct net_device *ndev = platform_get_drvdata(pdev);
>>>> struct ravb_private *priv = netdev_priv(ndev);
>>>> const struct ravb_hw_info *info = priv->info;
>>>> + int error;
>>>>
>>>> unregister_netdev(ndev);
>>>> if (info->nc_queues)
>>>> @@ -2908,8 +2933,9 @@ static void ravb_remove(struct platform_device *pdev)
>>>> dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat,
>>>> priv->desc_bat_dma);
>>>>
>>>> - /* Set reset mode */
>>>> - ravb_write(ndev, CCC_OPC_RESET, CCC);
>>>> + error = ravb_set_reset_mode(ndev);
>>>> + if (error)
>>>> + netdev_err(ndev, "Failed to reset ndev\n");
>>>>
>>>> clk_disable_unprepare(priv->gptp_clk);
>>>> clk_disable_unprepare(priv->refclk);
>>>> @@ -2991,8 +3017,11 @@ static int __maybe_unused ravb_resume(struct device *dev)
>>>> int ret = 0;
>>>>
>>>> /* If WoL is enabled set reset mode to rearm the WoL logic */
>>>> - if (priv->wol_enabled)
>>>> - ravb_write(ndev, CCC_OPC_RESET, CCC);
>>>> + if (priv->wol_enabled) {
>>>> + ret = ravb_set_reset_mode(ndev);
>>>> + if (ret)
>>>> + return ret;
>>>> + }
>>>>
>>>> /* All register have been reset to default values.
>>>> * Restore all registers which where setup at probe time and
>>>> @@ -3000,7 +3029,9 @@ static int __maybe_unused ravb_resume(struct device *dev)
>>>> */
>>>>
>>>> /* Set AVB config mode */
>>>> - ravb_set_config_mode(ndev);
>>>> + ret = ravb_set_config_mode(ndev);
>>>> + if (ret)
>>>> + return ret;
>>>>
>>>> if (info->gptp || info->ccc_gac) {
>>>> /* Set GTI value */
>>>> --
>>>> 2.39.2
>>>>
>>>
>
Powered by blists - more mailing lists