[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2e77e3b1-00b6-46b9-bfed-7cae3ffa15e9@linaro.org>
Date: Fri, 15 Dec 2023 11:37:40 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Jie Luo <quic_luoj@...cinc.com>, Conor Dooley <conor@...nel.org>
Cc: agross@...nel.org, andersson@...nel.org, konrad.dybcio@...aro.org,
davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
pabeni@...hat.com, robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org, andrew@...n.ch, hkallweit1@...il.com,
linux@...linux.org.uk, robert.marko@...tura.hr,
linux-arm-msm@...r.kernel.org, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
quic_srichara@...cinc.com
Subject: Re: [PATCH v2 5/5] dt-bindings: net: ipq4019-mdio: Document ipq5332
platform
On 15/12/2023 11:33, Jie Luo wrote:
>>>>>>>>> + cmn-reference-clock:
>>>>>>>>> + oneOf:
>>>>>>>>> + - items:
>>>>>>>>> + - enum:
>>>>>>>>> + - 0 # CMN PLL reference internal 48MHZ
>>>>>>>>> + - 1 # CMN PLL reference external 25MHZ
>>>>>>>>> + - 2 # CMN PLL reference external 31250KHZ
>>>>>>>>> + - 3 # CMN PLL reference external 40MHZ
>>>>>>>>> + - 4 # CMN PLL reference external 48MHZ
>>>>>>>>> + - 5 # CMN PLL reference external 50MHZ
>>>>>>>>> + - 6 # CMN PLL reference internal 96MHZ
>>>>>>>>
>>>>>>>> Why is this not represented by an element of the clocks property?
>>>>>>>
>>>>>>> This property is for the reference clock source selection of CMN PLL,
>>>>>>> CMN PLL generates the different clock rates for the different Ethernet
>>>>>>> blocks, this CMN PLL configuration is not located in the GCC, so the
>>>>>>> clock framework can't be used, which is the general hardware register
>>>>>>> instead of RCG register for GCC.
>>>>>>
>>>>>> I don't see how the clock being provided by the "GCC" (whatever that is)
>>>>>> or by some other clock controller or fixed clock makes a difference.
>>>>>> Why can't the other clock provider be represented in the devicetree?
>>>>>>
>>>>>
>>>>> cmn-reference-clock is for selecting the reference clock source for the
>>>>> whole Ethernet block, which is just the standalone configure register.
>>>>
>>>> Sure, you are aware though that all clocks are just configure registers?
>>>>
>>>> Which clocks are these mentioned in the property? From where do they come?
>>>>
>>>> Anyway, property is in existing form is not correct - this is not a
>>>> generic property.
>>>>
>>>
>>> This property cmn-reference-clock is just the hardware register
>>> configuration, since the different IPQ platform needs to select
>>> the different reference clock source for the CMN PLL block that
>>> provides the various clock outputs to the all kinds of Ethernet
>>> devices, which is not from GCC provider.
>>
>> AGAIN: where do the clocks come from? Which device generates them?
>
> Oh, OK, the reference clock is from wifi that provides 48MHZ to
> Ethernet block.
Then WiFi should be providing you the clock and this device should be
clock consumer, right?
Best regards,
Krzysztof
Powered by blists - more mailing lists