| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231217235011.2070-1-ansuelsmth@gmail.com>
Date: Mon, 18 Dec 2023 00:50:11 +0100
From: Christian Marangi <ansuelsmth@...il.com>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Christian Marangi <ansuelsmth@...il.com>
Subject: [net-next PATCH] net: phy: at803x: better align function varibles to open parenthesis
Better align function variables to open parenthesis as suggested by
checkpatch script for qca808x function to make code cleaner.
For cable_test_get_status function some additional rework was needed to
handle too long functions.
Signed-off-by: Christian Marangi <ansuelsmth@...il.com>
---
drivers/net/phy/at803x.c | 65 ++++++++++++++++++++++------------------
1 file changed, 36 insertions(+), 29 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index d5dc927618ab..5e3fbaa7c26c 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1781,27 +1781,27 @@ static int qca808x_phy_fast_retrain_config(struct phy_device *phydev)
return ret;
phy_write_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_TOP_OPTION1,
- QCA808X_TOP_OPTION1_DATA);
+ QCA808X_TOP_OPTION1_DATA);
phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB,
- QCA808X_MSE_THRESHOLD_20DB_VALUE);
+ QCA808X_MSE_THRESHOLD_20DB_VALUE);
phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB,
- QCA808X_MSE_THRESHOLD_17DB_VALUE);
+ QCA808X_MSE_THRESHOLD_17DB_VALUE);
phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB,
- QCA808X_MSE_THRESHOLD_27DB_VALUE);
+ QCA808X_MSE_THRESHOLD_27DB_VALUE);
phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB,
- QCA808X_MSE_THRESHOLD_28DB_VALUE);
+ QCA808X_MSE_THRESHOLD_28DB_VALUE);
phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_1,
- QCA808X_MMD3_DEBUG_1_VALUE);
+ QCA808X_MMD3_DEBUG_1_VALUE);
phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_4,
- QCA808X_MMD3_DEBUG_4_VALUE);
+ QCA808X_MMD3_DEBUG_4_VALUE);
phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_5,
- QCA808X_MMD3_DEBUG_5_VALUE);
+ QCA808X_MMD3_DEBUG_5_VALUE);
phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_3,
- QCA808X_MMD3_DEBUG_3_VALUE);
+ QCA808X_MMD3_DEBUG_3_VALUE);
phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_6,
- QCA808X_MMD3_DEBUG_6_VALUE);
+ QCA808X_MMD3_DEBUG_6_VALUE);
phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_2,
- QCA808X_MMD3_DEBUG_2_VALUE);
+ QCA808X_MMD3_DEBUG_2_VALUE);
return 0;
}
@@ -1838,13 +1838,14 @@ static int qca808x_config_init(struct phy_device *phydev)
/* Active adc&vga on 802.3az for the link 1000M and 100M */
ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_ADDR_CLD_CTRL7,
- QCA808X_8023AZ_AFE_CTRL_MASK, QCA808X_8023AZ_AFE_EN);
+ QCA808X_8023AZ_AFE_CTRL_MASK, QCA808X_8023AZ_AFE_EN);
if (ret)
return ret;
/* Adjust the threshold on 802.3az for the link 1000M */
ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
- QCA808X_PHY_MMD3_AZ_TRAINING_CTRL, QCA808X_MMD3_AZ_TRAINING_VAL);
+ QCA808X_PHY_MMD3_AZ_TRAINING_CTRL,
+ QCA808X_MMD3_AZ_TRAINING_VAL);
if (ret)
return ret;
@@ -1870,7 +1871,8 @@ static int qca808x_config_init(struct phy_device *phydev)
/* Configure adc threshold as 100mv for the link 10M */
return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD,
- QCA808X_ADC_THRESHOLD_MASK, QCA808X_ADC_THRESHOLD_100MV);
+ QCA808X_ADC_THRESHOLD_MASK,
+ QCA808X_ADC_THRESHOLD_100MV);
}
static int qca808x_read_status(struct phy_device *phydev)
@@ -1883,7 +1885,7 @@ static int qca808x_read_status(struct phy_device *phydev)
return ret;
linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->lp_advertising,
- ret & MDIO_AN_10GBT_STAT_LP2_5G);
+ ret & MDIO_AN_10GBT_STAT_LP2_5G);
ret = genphy_read_status(phydev);
if (ret)
@@ -2070,18 +2072,22 @@ static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finish
ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_D,
qca808x_cable_test_result_trans(pair_d));
- if (qca808x_cdt_fault_length_valid(pair_a))
- ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A,
- qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A));
- if (qca808x_cdt_fault_length_valid(pair_b))
- ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B,
- qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B));
- if (qca808x_cdt_fault_length_valid(pair_c))
- ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C,
- qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C));
- if (qca808x_cdt_fault_length_valid(pair_d))
- ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D,
- qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D));
+ if (qca808x_cdt_fault_length_valid(pair_a)) {
+ val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A);
+ ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A, val);
+ }
+ if (qca808x_cdt_fault_length_valid(pair_b)) {
+ val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B);
+ ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B, val);
+ }
+ if (qca808x_cdt_fault_length_valid(pair_c)) {
+ val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C);
+ ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C, val);
+ }
+ if (qca808x_cdt_fault_length_valid(pair_d)) {
+ val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D);
+ ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D, val);
+ }
*finished = true;
@@ -2148,8 +2154,9 @@ static void qca808x_link_change_notify(struct phy_device *phydev)
* the interface device address is always phy address added by 1.
*/
mdiobus_c45_modify_changed(phydev->mdio.bus, phydev->mdio.addr + 1,
- MDIO_MMD_PMAPMD, QCA8081_PHY_SERDES_MMD1_FIFO_CTRL,
- QCA8081_PHY_FIFO_RSTN, phydev->link ? QCA8081_PHY_FIFO_RSTN : 0);
+ MDIO_MMD_PMAPMD, QCA8081_PHY_SERDES_MMD1_FIFO_CTRL,
+ QCA8081_PHY_FIFO_RSTN,
+ phydev->link ? QCA8081_PHY_FIFO_RSTN : 0);
}
static struct phy_driver at803x_driver[] = {
--
2.40.1
Powered by blists - more mailing lists