netdev - Re: [PATCH net-next] net: stmmac: dwmac-qcom-ethqos: Add support for 2.5G SGMII

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4zbf5fmijxnajk7kygcjrcusf6tdnuzsqqboh23nr6f3rb3c4g@qkfofhq7jmv6>
Date: Mon, 18 Dec 2023 10:20:03 -0600
From: Andrew Halaney <ahalaney@...hat.com>
To: Sneh Shah <quic_snehshah@...cinc.com>
Cc: Vinod Koul <vkoul@...nel.org>, 
	Bhupesh Sharma <bhupesh.sharma@...aro.org>, Alexandre Torgue <alexandre.torgue@...s.st.com>, 
	Jose Abreu <joabreu@...opsys.com>, "David S. Miller" <davem@...emloft.net>, 
	Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, 
	Paolo Abeni <pabeni@...hat.com>, Maxime Coquelin <mcoquelin.stm32@...il.com>, 
	netdev@...r.kernel.org, linux-arm-msm@...r.kernel.org, 
	linux-stm32@...md-mailman.stormreply.com, linux-arm-kernel@...ts.infradead.org, 
	linux-kernel@...r.kernel.org, kernel@...cinc.com
Subject: Re: [PATCH net-next] net: stmmac: dwmac-qcom-ethqos: Add support for
 2.5G SGMII

On Mon, Dec 18, 2023 at 12:41:18PM +0530, Sneh Shah wrote:
> Serdes phy needs to operate at 2500 mode for 2.5G speed and 1000
> mode for 1G/100M/10M speed.
> Added changes to configure serdes phy and mac based on link speed.
> 
> Signed-off-by: Sneh Shah <quic_snehshah@...cinc.com>
> ---
>  .../stmicro/stmmac/dwmac-qcom-ethqos.c        | 31 +++++++++++++++++--
>  1 file changed, 29 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> index d3bf42d0fceb..b3a28dc19161 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> @@ -21,6 +21,7 @@
>  #define RGMII_IO_MACRO_CONFIG2		0x1C
>  #define RGMII_IO_MACRO_DEBUG1		0x20
>  #define EMAC_SYSTEM_LOW_POWER_DEBUG	0x28
> +#define ETHQOS_MAC_AN_CTRL		0xE0
>  
>  /* RGMII_IO_MACRO_CONFIG fields */
>  #define RGMII_CONFIG_FUNC_CLK_EN		BIT(30)
> @@ -78,6 +79,10 @@
>  #define ETHQOS_MAC_CTRL_SPEED_MODE		BIT(14)
>  #define ETHQOS_MAC_CTRL_PORT_SEL		BIT(15)
>  
> +/*ETHQOS_MAC_AN_CTRL bits */
> +#define ETHQOS_MAC_AN_CTRL_RAN			BIT(9)
> +#define ETHQOS_MAC_AN_CTRL_ANE			BIT(12)
> +

nit: space please add a space before ETHQOS_MAC_AN_CTRL

>  struct ethqos_emac_por {
>  	unsigned int offset;
>  	unsigned int value;
> @@ -109,6 +114,7 @@ struct qcom_ethqos {
>  	unsigned int num_por;
>  	bool rgmii_config_loopback_en;
>  	bool has_emac_ge_3;
> +	unsigned int serdes_speed;
>  };
>  
>  static int rgmii_readl(struct qcom_ethqos *ethqos, unsigned int offset)
> @@ -600,27 +606,47 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos)
>  
>  static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
>  {
> -	int val;
> -
> +	int val, mac_an_value;
>  	val = readl(ethqos->mac_base + MAC_CTRL_REG);
> +	mac_an_value = readl(ethqos->mac_base + ETHQOS_MAC_AN_CTRL);
>  
>  	switch (ethqos->speed) {
> +	case SPEED_2500:
> +		val &= ~ETHQOS_MAC_CTRL_PORT_SEL;
> +		rgmii_updatel(ethqos, RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
> +			      RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
> +			      RGMII_IO_MACRO_CONFIG2);
> +		if (ethqos->serdes_speed != SPEED_2500)
> +			phy_set_speed(ethqos->serdes_phy, ethqos->speed);
> +		mac_an_value &= ~ETHQOS_MAC_AN_CTRL_ANE;
> +		break;
>  	case SPEED_1000:
>  		val &= ~ETHQOS_MAC_CTRL_PORT_SEL;
>  		rgmii_updatel(ethqos, RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
>  			      RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
>  			      RGMII_IO_MACRO_CONFIG2);
> +		if (ethqos->serdes_speed != SPEED_1000)
> +			phy_set_speed(ethqos->serdes_phy, ethqos->speed);
> +		mac_an_value |= ETHQOS_MAC_AN_CTRL_RAN | ETHQOS_MAC_AN_CTRL_ANE;
>  		break;
>  	case SPEED_100:
>  		val |= ETHQOS_MAC_CTRL_PORT_SEL | ETHQOS_MAC_CTRL_SPEED_MODE;
> +		if (ethqos->serdes_speed != SPEED_1000)
> +			phy_set_speed(ethqos->serdes_phy, ethqos->speed);
> +		mac_an_value |= ETHQOS_MAC_AN_CTRL_RAN | ETHQOS_MAC_AN_CTRL_ANE;
>  		break;
>  	case SPEED_10:
>  		val |= ETHQOS_MAC_CTRL_PORT_SEL;
>  		val &= ~ETHQOS_MAC_CTRL_SPEED_MODE;
> +		if (ethqos->serdes_speed != SPEED_1000)
> +			phy_set_speed(ethqos->serdes_phy, ethqos->speed);
> +		mac_an_value |= ETHQOS_MAC_AN_CTRL_RAN | ETHQOS_MAC_AN_CTRL_ANE;
>  		break;
>  	}
>  
>  	writel(val, ethqos->mac_base + MAC_CTRL_REG);
> +	writel(mac_an_value, ethqos->mac_base + ETHQOS_MAC_AN_CTRL);
> +	ethqos->serdes_speed = ethqos->speed;

I see these bits are generic and there's some functions in stmmac_pcs.h
that muck with these...

Could you help me understand if this really should be Qualcomm specific,
or if this is something that should be considered for the more core bits
of the driver? I feel in either case we should take advantage of the
common definitions in that file if possible.

>  
>  	return val;
>  }
> @@ -789,6 +815,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
>  				     "Failed to get serdes phy\n");
>  
>  	ethqos->speed = SPEED_1000;
> +	ethqos->serdes_speed = SPEED_1000;
>  	ethqos_update_link_clk(ethqos, SPEED_1000);
>  	ethqos_set_func_clk_en(ethqos);
>  
> -- 
> 2.17.1
>