[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231220155518.15692-1-kabel@kernel.org>
Date: Wed, 20 Dec 2023 16:55:03 +0100
From: Marek Behún <kabel@...nel.org>
To: netdev@...r.kernel.org,
Andrew Lunn <andrew@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>
Cc: Russell King <rmk+kernel@...linux.org.uk>,
Alexander Couzens <lynxis@...0.eu>,
Daniel Golle <daniel@...rotopia.org>,
Heiner Kallweit <hkallweit1@...il.com>,
Willy Liu <willy.liu@...ltek.com>,
Ioana Ciornei <ioana.ciornei@....com>,
Marek Mojík <marek.mojik@....cz>,
Maximilián Maliar <maximilian.maliar@....cz>,
Marek Behún <kabel@...nel.org>
Subject: [PATCH net-next 00/15] Realtek RTL822x PHY rework to c45 and SerDes interface switching
Hi,
this series reworks the realtek PHY driver's support for rtl822x
2.5G transceivers:
- First I change the driver so that the high level driver methods
only use clause 45 register accesses (the only clause 22 accesses
are left when accessing c45 registers indirectly, if the MDIO bus
does not support clause 45 accesses).
The driver starts using the genphy_c45_* methods.
At this point the driver is ready to be used on a MDIO bus capable
of only clause 45 accesses, but will still work on clause 22 only
MDIO bus.
- I then add support for SerDes mode switching between 2500base-x
and sgmii, based on autonegotiated copper speed.
All this is done so that we can support another 2.5G copper SFP
module, which is enabled by the last patch.
Marek
Alexander Couzens (1):
net: phy: realtek: configure SerDes mode for rtl822x PHYs
Marek Behún (14):
net: phy: fail early with error code if indirect MMD access fails
net: phy: export indirect MMD register accessors
net: phy: realtek: rework MMD register access methods
net: phy: realtek: fill .read_mmd and .write_mmd methods for all
rtl822x PHYs
net: mdio: add 2.5g and 5g related PMA speed constants
net: phy: realtek: use generic MDIO constants
net: phy: realtek: set is_c45 and fill in c45 IDs in PHY probe for
rtl822x PHYs
net: phy: realtek: use generic clause 45 feature reading for rtl822x
PHYs
net: phy: realtek: read standard MMD register for rtlgen speed
capability
net: phy: realtek: use generic c45 AN config with 1000baseT vendor
extension for rtl822x
net: phy: realtek: use generic c45 status reading with 1000baseT
vendor extension for rtl822x
net: phy: realtek: use generic c45 suspend/resume for rtl822x
net: phy: realtek: drop .read_page and .write_page for rtl822x series
net: sfp: add quirk for another multigig RollBall transceiver
drivers/net/phy/phy-core.c | 54 ++++--
drivers/net/phy/realtek.c | 343 ++++++++++++++++++++++---------------
drivers/net/phy/sfp.c | 1 +
include/linux/phy.h | 10 ++
include/uapi/linux/mdio.h | 2 +
5 files changed, 257 insertions(+), 153 deletions(-)
--
2.41.0
Powered by blists - more mailing lists