| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <8eacd500-b092-4031-91d1-f2edccf18d21@loongson.cn>
Date: Thu, 21 Dec 2023 19:50:08 +0800
From: Yanteng Si <siyanteng@...ngson.cn>
To: Serge Semin <fancer.lancer@...il.com>
Cc: andrew@...n.ch, hkallweit1@...il.com, peppe.cavallaro@...com,
alexandre.torgue@...s.st.com, joabreu@...opsys.com, Jose.Abreu@...opsys.com,
chenhuacai@...ngson.cn, linux@...linux.org.uk, guyinggang@...ngson.cn,
netdev@...r.kernel.org, chris.chenfeiyang@...il.com
Subject: Re: [PATCH net-next v7 1/9] net: stmmac: Pass stmmac_priv and chan in
some callbacks
在 2023/12/21 02:18, Serge Semin 写道:
> Hi Yanteng
>
> On Tue, Dec 19, 2023 at 10:17:04PM +0800, Yanteng Si wrote:
>> Loongson GMAC and GNET have some special features. To prepare for that,
>> pass stmmac_priv and chan to more callbacks, and adjust the callbacks
>> accordingly.
>>
>> Signed-off-by: Yanteng Si <siyanteng@...ngson.cn>
>> Signed-off-by: Feiyang Chen <chenfeiyang@...ngson.cn>
>> Signed-off-by: Yinggang Gu <guyinggang@...ngson.cn>
>> ---
>> drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 2 +-
>> drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 2 +-
>> drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c | 2 +-
>> drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 2 +-
>> drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h | 3 ++-
>> drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c | 3 ++-
>> drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 2 +-
>> drivers/net/ethernet/stmicro/stmmac/hwif.h | 11 ++++++-----
>> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++---
>> 9 files changed, 18 insertions(+), 15 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
>> index 137741b94122..7cdfa0bdb93a 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
>> @@ -395,7 +395,7 @@ static void sun8i_dwmac_dma_start_tx(struct stmmac_priv *priv,
>> writel(v, ioaddr + EMAC_TX_CTL1);
>> }
>>
>> -static void sun8i_dwmac_enable_dma_transmission(void __iomem *ioaddr)
>> +static void sun8i_dwmac_enable_dma_transmission(void __iomem *ioaddr, u32 chan)
> As Simon correctly noted this prototype is incomplete. Although AFAICS
> you never use a pointer to stmmac_priv in this method. So I guess you
> could fix the callback prototype instead.
>
>> {
>> u32 v;
>>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
>> index daf79cdbd3ec..5e80d3eec9db 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
>> @@ -70,7 +70,7 @@ static void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
>> writel(value, ioaddr + DMA_AXI_BUS_MODE);
>> }
>>
>> -static void dwmac1000_dma_init(void __iomem *ioaddr,
>> +static void dwmac1000_dma_init(struct stmmac_priv *priv, void __iomem *ioaddr,
>> struct stmmac_dma_cfg *dma_cfg, int atds)
>> {
>> u32 value = readl(ioaddr + DMA_BUS_MODE);
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
>> index dea270f60cc3..105e7d4d798f 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
>> @@ -18,7 +18,7 @@
>> #include "dwmac100.h"
>> #include "dwmac_dma.h"
>>
>> -static void dwmac100_dma_init(void __iomem *ioaddr,
>> +static void dwmac100_dma_init(struct stmmac_priv *priv, void __iomem *ioaddr,
>> struct stmmac_dma_cfg *dma_cfg, int atds)
>> {
>> /* Enable Application Access by writing to DMA CSR0 */
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
>> index 84d3a8551b03..dc54c4e793fd 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
>> @@ -152,7 +152,7 @@ static void dwmac410_dma_init_channel(struct stmmac_priv *priv,
>> ioaddr + DMA_CHAN_INTR_ENA(dwmac4_addrs, chan));
>> }
>>
>> -static void dwmac4_dma_init(void __iomem *ioaddr,
>> +static void dwmac4_dma_init(struct stmmac_priv *priv, void __iomem *ioaddr,
>> struct stmmac_dma_cfg *dma_cfg, int atds)
>> {
>> u32 value = readl(ioaddr + DMA_SYS_BUS_MODE);
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
>> index 72672391675f..e7aef136824b 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
>> @@ -152,7 +152,8 @@
>> #define NUM_DWMAC1000_DMA_REGS 23
>> #define NUM_DWMAC4_DMA_REGS 27
>>
>> -void dwmac_enable_dma_transmission(void __iomem *ioaddr);
>> +void dwmac_enable_dma_transmission(struct stmmac_priv *priv,
>> + void __iomem *ioaddr, u32 chan);
>> void dwmac_enable_dma_irq(struct stmmac_priv *priv, void __iomem *ioaddr,
>> u32 chan, bool rx, bool tx);
>> void dwmac_disable_dma_irq(struct stmmac_priv *priv, void __iomem *ioaddr,
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
>> index 7907d62d3437..2f0df16fb7e4 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
>> @@ -28,7 +28,8 @@ int dwmac_dma_reset(void __iomem *ioaddr)
>> }
>>
>> /* CSR1 enables the transmit DMA to check for new descriptor */
>> -void dwmac_enable_dma_transmission(void __iomem *ioaddr)
>> +void dwmac_enable_dma_transmission(struct stmmac_priv *priv,
>> + void __iomem *ioaddr, u32 chan)
>> {
>> writel(1, ioaddr + DMA_XMT_POLL_DEMAND);
>> }
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
>> index 3cde695fec91..a06f9573876f 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
>> @@ -19,7 +19,7 @@ static int dwxgmac2_dma_reset(void __iomem *ioaddr)
>> !(value & XGMAC_SWR), 0, 100000);
>> }
>>
>> -static void dwxgmac2_dma_init(void __iomem *ioaddr,
>> +static void dwxgmac2_dma_init(struct stmmac_priv *priv, void __iomem *ioaddr,
>> struct stmmac_dma_cfg *dma_cfg, int atds)
>> {
>> u32 value = readl(ioaddr + XGMAC_DMA_SYSBUS_MODE);
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
>> index 7be04b54738b..a44aa3671fb8 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
>> +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
>> @@ -175,8 +175,8 @@ struct dma_features;
>> struct stmmac_dma_ops {
>> /* DMA core initialization */
>> int (*reset)(void __iomem *ioaddr);
>> - void (*init)(void __iomem *ioaddr, struct stmmac_dma_cfg *dma_cfg,
>> - int atds);
>> + void (*init)(struct stmmac_priv *priv, void __iomem *ioaddr,
>> + struct stmmac_dma_cfg *dma_cfg, int atds);
> There is a good chance this change is also unnecessary. I'll post my
> comment about that to Patch 4/9.
>
>> void (*init_chan)(struct stmmac_priv *priv, void __iomem *ioaddr,
>> struct stmmac_dma_cfg *dma_cfg, u32 chan);
>> void (*init_rx_chan)(struct stmmac_priv *priv, void __iomem *ioaddr,
>> @@ -198,7 +198,8 @@ struct stmmac_dma_ops {
>> /* To track extra statistic (if supported) */
>> void (*dma_diagnostic_fr)(struct stmmac_extra_stats *x,
>> void __iomem *ioaddr);
>
>> - void (*enable_dma_transmission) (void __iomem *ioaddr);
>> + void (*enable_dma_transmission)(struct stmmac_priv *priv,
>> + void __iomem *ioaddr, u32 chan);
> Why do you need the pointer to the stmmac_priv structure instance
> here? I failed to find a place you using it in the subsequent patches.
it's here：
@@ -70,7 +70,7 @@ static void dwmac1000_dma_axi(void __iomem *ioaddr,
struct stmmac_axi *axi)
writel(value, ioaddr + DMA_AXI_BUS_MODE);
}
-static void dwmac1000_dma_init(void __iomem *ioaddr,
+static void dwmac1000_dma_init(struct stmmac_priv *priv, void __iomem
*ioaddr,
struct stmmac_dma_cfg *dma_cfg, int atds)
{
u32 value = readl(ioaddr + DMA_BUS_MODE);
@@ -118,7 +118,10 @@ static void dwmac1000_dma_init(struct stmmac_priv
*priv, void __iomem *ioaddr,
u32 dma_intr_mask;
/* Mask interrupts by writing to CSR7 */
- dma_intr_mask = DMA_INTR_DEFAULT_MASK;
+ if (priv->plat->flags & STMMAC_FLAG_HAS_LGMAC)
+ dma_intr_mask = DMA_INTR_DEFAULT_MASK_LOONGSON;
+ else
+ dma_intr_mask = DMA_INTR_DEFAULT_MASK;
dma_config(ioaddr + DMA_BUS_MODE, ioaddr + DMA_INTR_ENA,
dma_cfg, dma_intr_mask, atds);
Thank you for all your comments, I need some time to understand. :)
Thanks,
Yanteng
>
> * Sigh, just a general note in case if somebody would wish to make
> * things a bit more optimised and less complicated. The purpose of the
> * enable_dma_transmission() callback is to re-activate the DMA-engine
> * - exit from suspension and start poll-demanding the DMA descriptors.
> * In QoS GMAC and XGMAC the same is done by updating the Tx tail
> * pointer. It's implemented in stmmac_set_tx_tail_ptr(). So basically
> * both stmmac_enable_dma_transmission() and stmmac_set_tx_tail_ptr()
> * should be almost always called side-by-side. Alas the current
> * generic driver part doesn't do that. If it did in a some common way
> * you wouldn't have needed the enable_dma_transmission() update
> * because it would have already been updated to accept the
> * channel/queue parameter.
>
> -Serge(y)
>
>> void (*enable_dma_irq)(struct stmmac_priv *priv, void __iomem *ioaddr,
>> u32 chan, bool rx, bool tx);
>> void (*disable_dma_irq)(struct stmmac_priv *priv, void __iomem *ioaddr,
>> @@ -240,7 +241,7 @@ struct stmmac_dma_ops {
>> };
>>
>> #define stmmac_dma_init(__priv, __args...) \
>> - stmmac_do_void_callback(__priv, dma, init, __args)
>> + stmmac_do_void_callback(__priv, dma, init, __priv, __args)
>> #define stmmac_init_chan(__priv, __args...) \
>> stmmac_do_void_callback(__priv, dma, init_chan, __priv, __args)
>> #define stmmac_init_rx_chan(__priv, __args...) \
>> @@ -258,7 +259,7 @@ struct stmmac_dma_ops {
>> #define stmmac_dma_diagnostic_fr(__priv, __args...) \
>> stmmac_do_void_callback(__priv, dma, dma_diagnostic_fr, __args)
>> #define stmmac_enable_dma_transmission(__priv, __args...) \
>> - stmmac_do_void_callback(__priv, dma, enable_dma_transmission, __args)
>> + stmmac_do_void_callback(__priv, dma, enable_dma_transmission, __priv, __args)
>> #define stmmac_enable_dma_irq(__priv, __args...) \
>> stmmac_do_void_callback(__priv, dma, enable_dma_irq, __priv, __args)
>> #define stmmac_disable_dma_irq(__priv, __args...) \
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> index 47de466e432c..d868eb8dafc5 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> @@ -2558,7 +2558,7 @@ static bool stmmac_xdp_xmit_zc(struct stmmac_priv *priv, u32 queue, u32 budget)
>> true, priv->mode, true, true,
>> xdp_desc.len);
>>
>> - stmmac_enable_dma_transmission(priv, priv->ioaddr);
>> + stmmac_enable_dma_transmission(priv, priv->ioaddr, queue);
>>
>> xsk_tx_metadata_to_compl(meta,
>> &tx_q->tx_skbuff_dma[entry].xsk_meta);
>> @@ -4679,7 +4679,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
>>
>> netdev_tx_sent_queue(netdev_get_tx_queue(dev, queue), skb->len);
>>
>> - stmmac_enable_dma_transmission(priv, priv->ioaddr);
>> + stmmac_enable_dma_transmission(priv, priv->ioaddr, queue);
>>
>> stmmac_flush_tx_descriptors(priv, queue);
>> stmmac_tx_timer_arm(priv, queue);
>> @@ -4899,7 +4899,7 @@ static int stmmac_xdp_xmit_xdpf(struct stmmac_priv *priv, int queue,
>> u64_stats_update_end_irqrestore(&txq_stats->syncp, flags);
>> }
>>
>> - stmmac_enable_dma_transmission(priv, priv->ioaddr);
>> + stmmac_enable_dma_transmission(priv, priv->ioaddr, queue);
>>
>> entry = STMMAC_GET_ENTRY(entry, priv->dma_conf.dma_tx_size);
>> tx_q->cur_tx = entry;
>> --
>> 2.31.4
>>
Powered by blists - more mailing lists