netdev - Re: [PATCH v3 4/4] net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2220 PHY

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231221141636.GA122124@debian>
Date: Thu, 21 Dec 2023 15:16:36 +0100
From: Dimitri Fedrau <dima.fedrau@...il.com>
To: Stefan Eichenberger <eichest@...il.com>
Cc: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 4/4] net: phy: marvell-88q2xxx: add driver for the
 Marvell 88Q2220 PHY

Am Thu, Dec 21, 2023 at 02:47:57PM +0100 schrieb Stefan Eichenberger:
> Hi Dimitri,
>
Hi Stefan,

> On Thu, Dec 21, 2023 at 08:28:51AM +0100, Dimitri Fedrau wrote:
> > Add a driver for the Marvell 88Q2220. This driver allows to detect the
> > link, switch between 100BASE-T1 and 1000BASE-T1 and switch between
> > master and slave mode and autonegotiation.
> > 
> > Signed-off-by: Dimitri Fedrau <dima.fedrau@...il.com>
> 
> I tried to make your patch work in my setup but I'm unable to force a
> link speed. Were you able to force a different link speed with the
> following command?
> ethtool -s eth0 speed 100 autoneg off
>

I tested following modes, which all worked:

ethtool -s eth0 autoneg on master-slave forced-master
ethtool -s eth0 autoneg on master-slave preferred-master
ethtool -s eth0 autoneg on master-slave preferred-slave
ethtool -s eth0 autoneg on master-slave forced-slave

ethtool -s eth0 autoneg on master-slave forced-master speed 100
ethtool -s eth0 autoneg on master-slave preferred-master speed 100
ethtool -s eth0 autoneg on master-slave preferred-slave	speed 100
ethtool -s eth0 autoneg on master-slave forced-slave speed 100

ethtool -s eth0 autoneg off master-slave forced-master speed 1000
ethtool -s eth0 autoneg off master-slave preferred-master speed 1000
ethtool -s eth0 autoneg off master-slave preferred-slave speed 1000
ethtool -s eth0 autoneg off master-slave forced-slave speed 1000

ethtool -s eth0 autoneg off master-slave forced-master speed 100
ethtool -s eth0 autoneg off master-slave preferred-master speed 100
ethtool -s eth0 autoneg off master-slave preferred-slave speed 100
ethtool -s eth0 autoneg off master-slave forced-slave speed 100

Without setting the master-slave option it didn't work. I think its
mandatory.

> Regards,
> Stefan

Best regards,
Stefan