[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231221180047.1924733-11-maxime.chevallier@bootlin.com>
Date: Thu, 21 Dec 2023 19:00:43 +0100
From: Maxime Chevallier <maxime.chevallier@...tlin.com>
To: davem@...emloft.net
Cc: Maxime Chevallier <maxime.chevallier@...tlin.com>,
netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
thomas.petazzoni@...tlin.com,
Andrew Lunn <andrew@...n.ch>,
Jakub Kicinski <kuba@...nel.org>,
Eric Dumazet <edumazet@...gle.com>,
Paolo Abeni <pabeni@...hat.com>,
Russell King <linux@...linux.org.uk>,
linux-arm-kernel@...ts.infradead.org,
Christophe Leroy <christophe.leroy@...roup.eu>,
Herve Codina <herve.codina@...tlin.com>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Vladimir Oltean <vladimir.oltean@....com>,
Köry Maincent <kory.maincent@...tlin.com>,
Jesse Brandeburg <jesse.brandeburg@...el.com>,
Jonathan Corbet <corbet@....net>,
Marek Behún <kabel@...nel.org>,
Piergiorgio Beruto <piergiorgio.beruto@...il.com>,
Oleksij Rempel <o.rempel@...gutronix.de>,
Nicolò Veronese <nicveronese@...il.com>,
Simon Horman <horms@...nel.org>
Subject: [PATCH net-next v5 10/13] net: ethtool: pse-pd: Target the command to the requested PHY
PSE and PD configuration is a PHY-specific command. Instead of targeting
the command towards dev->phydev, use the request to pick the targeted
PHY device.
Signed-off-by: Maxime Chevallier <maxime.chevallier@...tlin.com>
---
V5: Added-back an incorrectly removed check
V4: No changes
V3: No changes
V2: New patch
net/ethtool/pse-pd.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/net/ethtool/pse-pd.c b/net/ethtool/pse-pd.c
index cc478af77111..4a1c8d37bd3d 100644
--- a/net/ethtool/pse-pd.c
+++ b/net/ethtool/pse-pd.c
@@ -31,12 +31,10 @@ const struct nla_policy ethnl_pse_get_policy[ETHTOOL_A_PSE_HEADER + 1] = {
[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy),
};
-static int pse_get_pse_attributes(struct net_device *dev,
+static int pse_get_pse_attributes(struct phy_device *phydev,
struct netlink_ext_ack *extack,
struct pse_reply_data *data)
{
- struct phy_device *phydev = dev->phydev;
-
if (!phydev) {
NL_SET_ERR_MSG(extack, "No PHY is attached");
return -EOPNOTSUPP;
@@ -64,7 +62,7 @@ static int pse_prepare_data(const struct ethnl_req_info *req_base,
if (ret < 0)
return ret;
- ret = pse_get_pse_attributes(dev, info->extack, data);
+ ret = pse_get_pse_attributes(req_base->phydev, info->extack, data);
ethnl_ops_complete(dev);
@@ -124,7 +122,6 @@ ethnl_set_pse_validate(struct ethnl_req_info *req_info, struct genl_info *info)
static int
ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
{
- struct net_device *dev = req_info->dev;
struct pse_control_config config = {};
struct nlattr **tb = info->attrs;
struct phy_device *phydev;
@@ -132,7 +129,7 @@ ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
/* this values are already validated by the ethnl_pse_set_policy */
config.admin_cotrol = nla_get_u32(tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL]);
- phydev = dev->phydev;
+ phydev = req_info->phydev;
if (!phydev) {
NL_SET_ERR_MSG(info->extack, "No PHY is attached");
return -EOPNOTSUPP;
--
2.43.0
Powered by blists - more mailing lists