netdev - Re: PHY issue with SJA1105Q/DP84849I Design

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAMty3ZBZNugYmKMjDdZnY0kFMeEb86uzSg2XL9Tn6Yb4t-TXKQ@mail.gmail.com>
Date: Tue, 26 Dec 2023 13:11:08 +0530
From: Jagan Teki <jagan@...rulasolutions.com>
To: Vladimir Oltean <olteanv@...il.com>
Cc: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>, "Andrew F. Davis" <afd@...com>, 
	Florian Fainelli <f.fainelli@...il.com>, linux-kernel <linux-kernel@...r.kernel.org>, 
	netdev@...r.kernel.org, 
	Michael Nazzareno Trimarchi <michael@...rulasolutions.com>, Ioana Ciornei <ioana.ciornei@....com>, 
	Shawn Guo <shawnguo@...nel.org>, 
	linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>, Fabio Estevam <festevam@...il.com>
Subject: Re: PHY issue with SJA1105Q/DP84849I Design

On Fri, Dec 22, 2023 at 8:21 PM Vladimir Oltean <olteanv@...il.com> wrote:
>
> On Wed, Dec 20, 2023 at 12:49:30PM +0530, Jagan Teki wrote:
> > [ 1255.021656] Modules linked in: mdio_netlink(O) bnep tag_sja1105 sja1105 pcs_xpcs brcmfmac brcmutil imx_sdma coda_vpu v4l2_jpeg imx_vdoa evbug
> > [ 1255.034578] CPU: 0 PID: 374 Comm: ip Tainted: G           O       6.1.58 #1
>
> Can you please reproduce the issue with no out-of-tree modules used
> (here mdio_netlink)?

root@...6solo:~# ip link set dev eth0 down
root@...6solo:~# ip link set dev ethphy0 down
root@...6solo:~# ip link set dev ethphy1 down
root@...6solo:~# ip link set dev ethphy0 address 00:11:22:33:44:55
root@...6solo:~# ip link set dev ethphy1 address 00:11:22:33:44:66
root@...6solo:~# ip addr add dev ethphy0 192.168.1.1/16
root@...6solo:~# ip addr add dev ethphy1 192.168.1.5/16
root@...6solo:~# ip link set dev eth0 up
[  617.126753] dp83848_config_init: ret 0
[  617.130831] TI DP83849I 10/100 Mbps PHY 2188000.ethernet-1:00:
attached PHY driver (mii_bus:phy_addr=2188000.ethernet-1:00, irq=POLL)
root@...6solo:~# [  619.207519] fec 2188000.ethernet eth0: Link is Up
- 100Mbps/Full - flow control rx/tx
[  619.215698] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

root@...6solo:~# ip link set dev ethphy0 up
[  634.114608] sja1105 spi1.0 ethphy0: configuring for phy/mii link mode
[  634.126617] ------------[ cut here ]------------
[  634.131463] WARNING: CPU: 0 PID: 330 at drivers/net/phy/phy.c:1157
phy_start+0x58/0xb4
[  634.139627] called from state RUNNING
[  634.143310] Modules linked in: bnep tag_sja1105 sja1105 pcs_xpcs
brcmfmac brcmutil imx_sdma coda_vpu v4l2_jpeg imx_vdoa evbug
[  634.154815] CPU: 0 PID: 330 Comm: ip Not tainted 6.1.58 #1
[  634.160321] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[  634.166866]  unwind_backtrace from show_stack+0x10/0x14
[  634.172125]  show_stack from dump_stack_lvl+0x58/0x70
[  634.177205]  dump_stack_lvl from __warn+0x70/0x1a4
[  634.182023]  __warn from warn_slowpath_fmt+0x1bc/0x270
[  634.187181]  warn_slowpath_fmt from phy_start+0x58/0xb4
[  634.192427]  phy_start from dsa_port_enable_rt+0x54/0x9c
[  634.197765]  dsa_port_enable_rt from dsa_slave_open+0xb8/0x17c
[  634.203624]  dsa_slave_open from __dev_open+0xec/0x1ac
[  634.208788]  __dev_open from __dev_change_flags+0x18c/0x224
[  634.214377]  __dev_change_flags from dev_change_flags+0x14/0x44
[  634.220313]  dev_change_flags from do_setlink+0x254/0xe4c
[  634.225737]  do_setlink from rtnl_newlink+0x598/0x80c
[  634.230811]  rtnl_newlink from rtnetlink_rcv_msg+0x168/0x574
[  634.236485]  rtnetlink_rcv_msg from netlink_rcv_skb+0xb8/0x11c
[  634.242337]  netlink_rcv_skb from netlink_unicast+0x1a8/0x2dc
[  634.248108]  netlink_unicast from netlink_sendmsg+0x1d8/0x450
[  634.253884]  netlink_sendmsg from ____sys_sendmsg+0x188/0x258
[  634.259656]  ____sys_sendmsg from ___sys_sendmsg+0x6c/0xa4
[  634.265164]  ___sys_sendmsg from sys_sendmsg+0x50/0x98
[  634.270324]  sys_sendmsg from ret_fast_syscall+0x0/0x1c
[  634.275569] Exception stack(0xf1071fa8 to 0xf1071ff0)
[  634.280637] 1fa0:                   00000000 00000001 00000003
bef4d710 00000000 00000000
[  634.288828] 1fc0: 00000000 00000001 b6f415a0 00000128 626ad475
00000000 00531cc0 00531cc0
[  634.297016] 1fe0: 00000128 bef4d6b0 b6e3f6d3 b6db1ae6
[  634.302150] irq event stamp: 3327
[  634.305485] hardirqs last  enabled at (3335): [<c0195dbc>]
__up_console_sem+0x50/0x60
[  634.313404] hardirqs last disabled at (3344): [<c0195da8>]
__up_console_sem+0x3c/0x60
[  634.321318] softirqs last  enabled at (3230): [<c01017d0>]
__do_softirq+0x2c0/0x57c
[  634.329055] softirqs last disabled at (3187): [<c012f204>]
__irq_exit_rcu+0x138/0x17c
[  634.336971] ---[ end trace 0000000000000000 ]---
root@...6solo:~# ip link set dev ethphy1 up
[  644.613564] sja1105 spi1.0 ethphy1: configuring for phy/mii link mode
root@...6solo:~# [  646.727549] sja1105 spi1.0 ethphy1: Link is Up -
100Mbps/Full - flow control off
[  646.735033] IPv6: ADDRCONF(NETDEV_CHANGE): ethphy1: link becomes ready

Thanks,
Jagan.