| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240102183835.5332-2-ansuelsmth@gmail.com>
Date: Tue, 2 Jan 2024 19:38:30 +0100
From: Christian Marangi <ansuelsmth@...il.com>
To: Pavel Machek <pavel@....cz>,
Lee Jones <lee@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
William Zhang <william.zhang@...adcom.com>,
Anand Gore <anand.gore@...adcom.com>,
Kursad Oney <kursad.oney@...adcom.com>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Rafał Miłecki <rafal@...ecki.pl>,
Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Jacek Anaszewski <jacek.anaszewski@...il.com>,
Fernández Rojas <noltari@...il.com>,
Sven Schwermer <sven.schwermer@...ruptive-technologies.com>,
Christian Marangi <ansuelsmth@...il.com>,
linux-leds@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
netdev@...r.kernel.org
Subject: [net-next PATCH v6 1/5] dt-bindings: net: phy: Make LED active-low property common
Move LED active-low property to common.yaml. This property is currently
defined multiple times by bcm LEDs. This property will now be supported
in a generic way for PHY LEDs with the use of a generic function.
With active-low bool property not defined, active-high is always
assumed.
Signed-off-by: Christian Marangi <ansuelsmth@...il.com>
---
Changes v5:
- Make active-low generic
Changes v4:
- Drop support for global active-low
- Rework to polarity option (for marvell10g series support)
Changes v3:
- Out of RFC
Changes v2:
- Add this patch
Documentation/devicetree/bindings/leds/common.yaml | 6 ++++++
Documentation/devicetree/bindings/leds/leds-bcm63138.yaml | 4 ----
Documentation/devicetree/bindings/leds/leds-bcm6328.yaml | 4 ----
Documentation/devicetree/bindings/leds/leds-bcm6358.txt | 2 --
.../devicetree/bindings/leds/leds-pwm-multicolor.yaml | 4 ----
Documentation/devicetree/bindings/leds/leds-pwm.yaml | 5 -----
6 files changed, 6 insertions(+), 19 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index c8d0ba5f2327..f5b40df6b421 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -200,6 +200,12 @@ properties:
#trigger-source-cells property in the source node.
$ref: /schemas/types.yaml#/definitions/phandle-array
+ active-low:
+ type: boolean
+ description:
+ Makes LED active low. To turn the LED ON, line needs to be
+ set to low voltage instead of high.
+
# Required properties for flash LED child nodes:
flash-max-microamp:
description:
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
index 52252fb6bb32..bb20394fca5c 100644
--- a/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
@@ -52,10 +52,6 @@ patternProperties:
maxItems: 1
description: LED pin number
- active-low:
- type: boolean
- description: Makes LED active low
-
required:
- reg
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
index 51cc0d82c12e..f3a3ef992929 100644
--- a/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
@@ -78,10 +78,6 @@ patternProperties:
- maximum: 23
description: LED pin number (only LEDs 0 to 23 are valid).
- active-low:
- type: boolean
- description: Makes LED active low.
-
brcm,hardware-controlled:
type: boolean
description: Makes this LED hardware controlled.
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
index 6e51c6b91ee5..211ffc3c4a20 100644
--- a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
@@ -25,8 +25,6 @@ LED sub-node required properties:
LED sub-node optional properties:
- label : see Documentation/devicetree/bindings/leds/common.txt
- - active-low : Boolean, makes LED active low.
- Default : false
- default-state : see
Documentation/devicetree/bindings/leds/common.txt
- linux,default-trigger : see
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
index bd6ec04a8727..5edfbe347341 100644
--- a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
@@ -41,10 +41,6 @@ properties:
pwm-names: true
- active-low:
- description: For PWMs where the LED is wired to supply rather than ground.
- type: boolean
-
color: true
required:
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.yaml b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
index 7de6da58be3c..113b7c218303 100644
--- a/Documentation/devicetree/bindings/leds/leds-pwm.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
@@ -34,11 +34,6 @@ patternProperties:
Maximum brightness possible for the LED
$ref: /schemas/types.yaml#/definitions/uint32
- active-low:
- description:
- For PWMs where the LED is wired to supply rather than ground.
- type: boolean
-
required:
- pwms
- max-brightness
--
2.43.0
Powered by blists - more mailing lists