[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240113102529.80371-3-arinc.unal@arinc9.com>
Date: Sat, 13 Jan 2024 13:25:23 +0300
From: Arınç ÜNAL <arinc.unal@...nc9.com>
To: Arınç ÜNAL <arinc.unal@...nc9.com>,
Daniel Golle <daniel@...rotopia.org>,
Landen Chao <Landen.Chao@...iatek.com>,
DENG Qingfang <dqfext@...il.com>,
Sean Wang <sean.wang@...iatek.com>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Cc: mithat.guner@...ont.com,
erkin.bozoglu@...ont.com,
Luiz Angelo Daros de Luca <luizluca@...il.com>,
netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Subject: [RFC PATCH net-next 2/8] net: dsa: mt7530: call port 6 setup from mt7530_mac_config()
mt7530_pad_clk_setup() is called if port 6 is enabled. It used to do more
things than setting up port 6. That part was moved to more appropriate
locations, mt7530_setup() and mt7530_pll_setup().
Now that all it does is set up port 6, rename it to mt7530_setup_port6(),
and move it to a more appropriate location, under mt7530_mac_config().
Leave an empty mt7530_pad_clk_setup() to satisfy the pad_setup function
pointer.
This is the code path for setting up the ports before:
mt753x_phylink_mac_config()
-> mt753x_mac_config()
-> mt7530_mac_config()
-> mt7530_setup_port5()
-> mt753x_pad_setup()
-> mt7530_pad_clk_setup()
This is after:
mt753x_phylink_mac_config()
-> mt753x_mac_config()
-> mt7530_mac_config()
-> mt7530_setup_port5()
-> mt7530_setup_port6()
Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
Reviewed-by: Vladimir Oltean <olteanv@...il.com>
---
drivers/net/dsa/mt7530.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 88ab926ce19e..434028e9667d 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -415,7 +415,7 @@ mt753x_preferred_default_local_cpu_port(struct dsa_switch *ds)
/* Setup port 6 interface mode and TRGMII TX circuit */
static int
-mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
+mt7530_setup_port6(struct dsa_switch *ds, phy_interface_t interface)
{
struct mt7530_priv *priv = ds->priv;
u32 ncpo1, ssc_delta, trgint, xtal;
@@ -487,6 +487,12 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
return 0;
}
+static int
+mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
+{
+ return 0;
+}
+
static int
mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
{
@@ -2608,12 +2614,15 @@ mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
phy_interface_t interface)
{
struct mt7530_priv *priv = ds->priv;
+ int ret;
- /* Only need to setup port5. */
- if (port != 5)
- return 0;
-
- mt7530_setup_port5(priv->ds, interface);
+ if (port == 5) {
+ mt7530_setup_port5(priv->ds, interface);
+ } else if (port == 6) {
+ ret = mt7530_setup_port6(priv->ds, interface);
+ if (ret)
+ return ret;
+ }
return 0;
}
--
2.40.1
Powered by blists - more mailing lists