netdev - Re: [RFC net-next v3 3/3] net: dsa: microchip: implement PHY loopback configuration for KSZ8794 and KSZ8873

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20240116135148.hleo3v5lztg4k6nd@skbuf>
Date: Tue, 16 Jan 2024 15:51:48 +0200
From: Vladimir Oltean <vladimir.oltean@....com>
To: Oleksij Rempel <o.rempel@...gutronix.de>
Cc: "David S. Miller" <davem@...emloft.net>, Andrew Lunn <andrew@...n.ch>,
	Eric Dumazet <edumazet@...gle.com>,
	Florian Fainelli <f.fainelli@...il.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Woojung Huh <woojung.huh@...rochip.com>,
	Arun Ramadoss <arun.ramadoss@...rochip.com>, kernel@...gutronix.de,
	linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
	UNGLinuxDriver@...rochip.com
Subject: Re: [RFC net-next v3 3/3] net: dsa: microchip: implement PHY
 loopback configuration for KSZ8794 and KSZ8873

On Fri, Jan 12, 2024 at 03:07:16PM +0100, Oleksij Rempel wrote:
> Correct the PHY loopback bit handling in the ksz8_w_phy_bmcr and
> ksz8_r_phy_bmcr functions for KSZ8794 and KSZ8873 variants in the ksz8795
> driver. Previously, the code erroneously used Bit 7 of port register 0xD
> for both chip variants, which is actually for LED configuration. This
> update ensures the correct registers and bits are used for the PHY
> loopback feature:
> 
> - For KSZ8794: Use 0xF / Bit 7.
> - For KSZ8873: Use 0xD / Bit 0.
> 
> The lack of loopback support was seen on KSZ8873 system by using
> "ethtool -t lanX". After this patch, the ethtool selftest will work,
> but only if port is not part of a bridge.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> ---

Reviewed-by: Vladimir Oltean <vladimir.oltean@....com>