Message-Id: <20240117160748.37682-10-brgl@bgdev.pl>
Date: Wed, 17 Jan 2024 17:07:48 +0100
From: Bartosz Golaszewski <brgl@...ev.pl>
To: Kalle Valo <kvalo@...nel.org>,
	"David S . Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Rob Herring <robh+dt@...nel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Bjorn Andersson <andersson@...nel.org>,
	Konrad Dybcio <konrad.dybcio@...aro.org>,
	Catalin Marinas <catalin.marinas@....com>,
	Will Deacon <will@...nel.org>,
	Bjorn Helgaas <bhelgaas@...gle.com>,
	Heiko Stuebner <heiko@...ech.de>,
	Jernej Skrabec <jernej.skrabec@...il.com>,
	Chris Morgan <macromorgan@...mail.com>,
	Linus Walleij <linus.walleij@...aro.org>,
	Geert Uytterhoeven <geert+renesas@...der.be>,
	Arnd Bergmann <arnd@...db.de>,
	Neil Armstrong <neil.armstrong@...aro.org>,
	Nícolas F . R . A . Prado <nfraprado@...labora.com>,
	Marek Szyprowski <m.szyprowski@...sung.com>,
	Peng Fan <peng.fan@....com>,
	Robert Richter <rrichter@....com>,
	Dan Williams <dan.j.williams@...el.com>,
	Jonathan Cameron <Jonathan.Cameron@...wei.com>,
	Terry Bowman <terry.bowman@....com>,
	Lukas Wunner <lukas@...ner.de>,
	Huacai Chen <chenhuacai@...nel.org>,
	Alex Elder <elder@...aro.org>,
	Srini Kandagatla <srinivas.kandagatla@...aro.org>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Abel Vesa <abel.vesa@...aro.org>
Cc: linux-wireless@...r.kernel.org,
	netdev@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-arm-msm@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-pci@...r.kernel.org,
	Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: [PATCH 9/9] PCI/pwrseq: add a pwrseq driver for QCA6390

From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>

Add a PCI power sequencing driver that's capable of correctly powering
up the ath11k module on QCA6390 and WCN7850 using the PCI pwrseq
functionality.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
[Neil: add support for WCN7850]
Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
---
 drivers/pci/pwrseq/Kconfig              |   8 +
 drivers/pci/pwrseq/Makefile             |   1 +
 drivers/pci/pwrseq/pci-pwrseq-qca6390.c | 267 ++++++++++++++++++++++++
 3 files changed, 276 insertions(+)
 create mode 100644 drivers/pci/pwrseq/pci-pwrseq-qca6390.c

diff --git a/drivers/pci/pwrseq/Kconfig b/drivers/pci/pwrseq/Kconfig
index a721a8a955c3..667c9c121f34 100644
--- a/drivers/pci/pwrseq/Kconfig
+++ b/drivers/pci/pwrseq/Kconfig
@@ -5,4 +5,12 @@ menu "PCI Power sequencing drivers"
 config PCI_PWRSEQ
 	bool
 
+config PCI_PWRSEQ_QCA6390
+	tristate "PCI Power Sequencing driver for QCA6390"
+	select PCI_PWRSEQ
+	default (ATH11K_PCI && ARCH_QCOM)
+	help
+	  Enable support for the PCI power sequencing driver for the
+	  ath11k module of the QCA6390 WLAN/BT chip.
+
 endmenu
diff --git a/drivers/pci/pwrseq/Makefile b/drivers/pci/pwrseq/Makefile
index 4052b6bb5aa5..5cf8cce01e82 100644
--- a/drivers/pci/pwrseq/Makefile
+++ b/drivers/pci/pwrseq/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
 
 obj-$(CONFIG_PCI_PWRSEQ)		+= pwrseq.o
+obj-$(CONFIG_PCI_PWRSEQ_QCA6390)	+= pci-pwrseq-qca6390.o
diff --git a/drivers/pci/pwrseq/pci-pwrseq-qca6390.c b/drivers/pci/pwrseq/pci-pwrseq-qca6390.c
new file mode 100644
index 000000000000..cdf3639ea29f
--- /dev/null
+++ b/drivers/pci/pwrseq/pci-pwrseq-qca6390.c
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2023 Linaro Ltd.
+ */
+
+#include <linux/bitmap.h>
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pci-pwrseq.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+struct pci_pwrseq_qca6390_vreg {
+	const char *name;
+	unsigned int load_uA;
+};
+
+struct pci_pwrseq_qca6390_pdata {
+	struct pci_pwrseq_qca6390_vreg *vregs;
+	size_t num_vregs;
+	unsigned int delay_msec;
+};
+
+struct pci_pwrseq_qca6390_ctx {
+	struct pci_pwrseq pwrseq;
+	const struct pci_pwrseq_qca6390_pdata *pdata;
+	struct regulator_bulk_data *regs;
+	struct gpio_descs *en_gpios;
+	unsigned long *en_gpios_values;
+	struct clk *clk;
+};
+
+static struct pci_pwrseq_qca6390_vreg pci_pwrseq_qca6390_vregs[] = {
+	{
+		.name = "vddio",
+		.load_uA = 20000,
+	},
+	{
+		.name = "vddaon",
+		.load_uA = 100000,
+	},
+	{
+		.name = "vddpmu",
+		.load_uA = 1250000,
+	},
+	{
+		.name = "vddpcie1",
+		.load_uA = 35000,
+	},
+	{
+		.name = "vddpcie2",
+		.load_uA = 15000,
+	},
+	{
+		.name = "vddrfa1",
+		.load_uA = 200000,
+	},
+	{
+		.name = "vddrfa2",
+		.load_uA = 400000,
+	},
+	{
+		.name = "vddrfa3",
+		.load_uA = 400000,
+	},
+};
+
+static struct pci_pwrseq_qca6390_pdata pci_pwrseq_qca6390_of_data = {
+	.vregs = pci_pwrseq_qca6390_vregs,
+	.num_vregs = ARRAY_SIZE(pci_pwrseq_qca6390_vregs),
+	.delay_msec = 16,
+};
+
+static struct pci_pwrseq_qca6390_vreg pci_pwrseq_wcn7850_vregs[] = {
+	{
+		.name = "vdd",
+	},
+	{
+		.name = "vddio",
+	},
+	{
+		.name = "vddio12",
+	},
+	{
+		.name = "vddaon",
+	},
+	{
+		.name = "vdddig",
+	},
+	{
+		.name = "vddrfa1",
+	},
+	{
+		.name = "vddrfa2",
+	},
+};
+
+static struct pci_pwrseq_qca6390_pdata pci_pwrseq_wcn7850_of_data = {
+	.vregs = pci_pwrseq_wcn7850_vregs,
+	.num_vregs = ARRAY_SIZE(pci_pwrseq_wcn7850_vregs),
+	.delay_msec = 50,
+};
+
+static int pci_pwrseq_qca6390_power_on(struct pci_pwrseq_qca6390_ctx *ctx)
+{
+	int ret;
+
+	ret = regulator_bulk_enable(ctx->pdata->num_vregs, ctx->regs);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(ctx->clk);
+	if (ret)
+		return ret;
+
+	bitmap_fill(ctx->en_gpios_values, ctx->en_gpios->ndescs);
+
+	ret = gpiod_set_array_value_cansleep(ctx->en_gpios->ndescs,
+					     ctx->en_gpios->desc,
+					     ctx->en_gpios->info,
+					     ctx->en_gpios_values);
+	if (ret) {
+		regulator_bulk_disable(ctx->pdata->num_vregs, ctx->regs);
+		return ret;
+	}
+
+	if (ctx->pdata->delay_msec)
+		msleep(ctx->pdata->delay_msec);
+
+	return 0;
+}
+
+static int pci_pwrseq_qca6390_power_off(struct pci_pwrseq_qca6390_ctx *ctx)
+{
+	int ret;
+
+	bitmap_zero(ctx->en_gpios_values, ctx->en_gpios->ndescs);
+
+	ret = gpiod_set_array_value_cansleep(ctx->en_gpios->ndescs,
+					     ctx->en_gpios->desc,
+					     ctx->en_gpios->info,
+					     ctx->en_gpios_values);
+	if (ret)
+		return ret;
+
+	clk_disable_unprepare(ctx->clk);
+
+	return regulator_bulk_disable(ctx->pdata->num_vregs, ctx->regs);
+}
+
+static void devm_pci_pwrseq_qca6390_power_off(void *data)
+{
+	struct pci_pwrseq_qca6390_ctx *ctx = data;
+
+	pci_pwrseq_qca6390_power_off(ctx);
+}
+
+static int pci_pwrseq_qca6390_probe(struct platform_device *pdev)
+{
+	struct pci_pwrseq_qca6390_ctx *ctx;
+	struct device *dev = &pdev->dev;
+	int ret, i;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->pdata = of_device_get_match_data(dev);
+	if (!ctx->pdata)
+		return dev_err_probe(dev, -ENODEV,
+				     "Failed to obtain platform data\n");
+
+	if (ctx->pdata->vregs) {
+		ctx->regs = devm_kcalloc(dev, ctx->pdata->num_vregs,
+					 sizeof(*ctx->regs), GFP_KERNEL);
+		if (!ctx->regs)
+			return -ENOMEM;
+
+		for (i = 0; i < ctx->pdata->num_vregs; i++)
+			ctx->regs[i].supply = ctx->pdata->vregs[i].name;
+
+		ret = devm_regulator_bulk_get(dev, ctx->pdata->num_vregs,
+					      ctx->regs);
+		if (ret < 0)
+			return dev_err_probe(dev, ret,
+					     "Failed to get all regulators\n");
+
+		for (i = 0; i < ctx->pdata->num_vregs; i++) {
+			if (!ctx->pdata->vregs[1].load_uA)
+				continue;
+
+			ret = regulator_set_load(ctx->regs[i].consumer,
+						 ctx->pdata->vregs[i].load_uA);
+			if (ret)
+				return dev_err_probe(dev, ret,
+						     "Failed to set vreg load\n");
+		}
+	}
+
+	ctx->clk = devm_clk_get_optional(dev, NULL);
+	if (IS_ERR(ctx->clk))
+		return dev_err_probe(dev, PTR_ERR(ctx->clk),
+				     "Failed to get clock\n");
+
+	ctx->en_gpios = devm_gpiod_get_array_optional(dev, "enable",
+						      GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->en_gpios))
+		return dev_err_probe(dev, PTR_ERR(ctx->en_gpios),
+				     "Failed to get enable GPIOs\n");
+
+	ctx->en_gpios_values = devm_bitmap_zalloc(dev, ctx->en_gpios->ndescs,
+						  GFP_KERNEL);
+	if (!ctx->en_gpios_values)
+		return -ENOMEM;
+
+	ret = pci_pwrseq_qca6390_power_on(ctx);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to power on the device\n");
+
+	ret = devm_add_action_or_reset(dev, devm_pci_pwrseq_qca6390_power_off,
+				       ctx);
+	if (ret)
+		return ret;
+
+	ctx->pwrseq.dev = dev;
+
+	ret = devm_pci_pwrseq_device_enable(dev, &ctx->pwrseq);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to register the pwrseq wrapper\n");
+
+	return 0;
+}
+
+static const struct of_device_id pci_pwrseq_qca6390_of_match[] = {
+	{
+		.compatible = "pci17cb,1101",
+		.data = &pci_pwrseq_qca6390_of_data,
+	},
+	{
+		.compatible = "pci17cb,1107",
+		.data = &pci_pwrseq_wcn7850_of_data,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pci_pwrseq_qca6390_of_match);
+
+static struct platform_driver pci_pwrseq_qca6390_driver = {
+	.driver = {
+		.name = "pci-pwrseq-qca6390",
+		.of_match_table = pci_pwrseq_qca6390_of_match,
+	},
+	.probe = pci_pwrseq_qca6390_probe,
+};
+module_platform_driver(pci_pwrseq_qca6390_driver);
+
+MODULE_AUTHOR("Bartosz Golaszewski <bartosz.golaszewski@...aro.org>");
+MODULE_DESCRIPTION("PCI Power Sequencing module for QCA6390");
+MODULE_LICENSE("GPL");
-- 
2.40.1

Powered by blists - more mailing lists