[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240117234515.226944-2-michael.chan@broadcom.com>
Date: Wed, 17 Jan 2024 15:45:11 -0800
From: Michael Chan <michael.chan@...adcom.com>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org,
edumazet@...gle.com,
kuba@...nel.org,
pabeni@...hat.com,
andrew.gospodarek@...adcom.com,
Damodharam Ammepalli <damodharam.ammepalli@...adcom.com>
Subject: [PATCH net 1/5] bnxt_en: Wait for FLR to complete during probe
The first message to firmware may fail if the device is undergoing FLR.
The driver has some recovery logic for this failure scenario but we must
wait 100 msec for FLR to complete before proceeding. Otherwise the
recovery will always fail.
Fixes: ba02629ff6cb ("bnxt_en: log firmware status on firmware init failure")
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@...adcom.com>
Signed-off-by: Michael Chan <michael.chan@...adcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 0aacd3c6ed5c..0866aba35d9b 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -13232,6 +13232,11 @@ static int bnxt_fw_init_one_p1(struct bnxt *bp)
bp->fw_cap = 0;
rc = bnxt_hwrm_ver_get(bp);
+ /* FW may be unresponsive after FLR. FLR must complete within 100 msec
+ * so wait before continuing with recovery.
+ */
+ if (rc)
+ msleep(100);
bnxt_try_map_fw_health_reg(bp);
if (rc) {
rc = bnxt_try_recover_fw(bp);
--
2.30.1
Download attachment "smime.p7s" of type "application/pkcs7-signature" (4209 bytes)
Powered by blists - more mailing lists