| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f98849a7-41e9-421b-97b7-36d720cc43ee@linux.alibaba.com>
Date: Thu, 18 Jan 2024 16:27:00 +0800
From: Wen Gu <guwen@...ux.alibaba.com>
To: wintera@...ux.ibm.com, wenjia@...ux.ibm.com, hca@...ux.ibm.com,
gor@...ux.ibm.com, agordeev@...ux.ibm.com, davem@...emloft.net,
edumazet@...gle.com, kuba@...nel.org, pabeni@...hat.com, jaka@...ux.ibm.com
Cc: borntraeger@...ux.ibm.com, svens@...ux.ibm.com,
alibuda@...ux.alibaba.com, tonylu@...ux.alibaba.com,
linux-s390@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next 00/15] net/smc: implement loopback-ism used by
SMC-D
On 2024/1/11 20:00, Wen Gu wrote:
> This patch set acts as the second part of the new version of [1] (The first
> part can be referred from [2]), the updated things of this version are listed
> at the end.
>
Hi Wenjia and Jan, I would appreciate any thoughts or comments you might have
on this series. Thank you very much!
>
> # Design
>
> This patch set includes 3 parts:
>
> - Patch #1-#2: some prepare work for loopback-ism.
> - Patch #3-#9: implement loopback-ism device.
> - Patch #10-#15: memory copy optimization for loopback scenario.
>
> The loopback-ism device is designed as a ISMv2 device and not be limited to
> a specific net namespace, ends of both inter-process connection (1/1' in diagram
> below) or inter-container connection (2/2' in diagram below) can find the same
> available loopback-ism and choose it during the CLC handshake.
>
> Container 1 (ns1) Container 2 (ns2)
> +-----------------------------------------+ +-------------------------+
> | +-------+ +-------+ +-------+ | | +-------+ |
> | | App A | | App B | | App C | | | | App D |<-+ |
> | +-------+ +---^---+ +-------+ | | +-------+ |(2') |
> | |127.0.0.1 (1')| |192.168.0.11 192.168.0.12| |
> | (1)| +--------+ | +--------+ |(2) | | +--------+ +--------+ |
> | `-->| lo |-` | eth0 |<-` | | | lo | | eth0 | |
> +---------+--|---^-+---+-----|--+---------+ +-+--------+---+-^------+-+
> | | | |
> Kernel | | | |
> +----+-------v---+-----------v----------------------------------+---+----+
> | | TCP | |
> | | | |
> | +--------------------------------------------------------------+ |
> | |
> | +--------------+ |
> | | smc loopback | |
> +---------------------------+--------------+-----------------------------+
>
> loopback-ism device creates DMBs (shared memory) for each connection peer.
> Since data transfer occurs within the same kernel, the sndbuf of each peer
> is only a descriptor and point to the same memory region as peer DMB, so that
> the data copy from sndbuf to peer DMB can be avoided in loopback-ism case.
>
> Container 1 (ns1) Container 2 (ns2)
> +-----------------------------------------+ +-------------------------+
> | +-------+ | | +-------+ |
> | | App C |-----+ | | | App D | |
> | +-------+ | | | +-^-----+ |
> | | | | | |
> | (2) | | | (2') | |
> | | | | | |
> +---------------|-------------------------+ +----------|--------------+
> | |
> Kernel | |
> +---------------|-----------------------------------------|--------------+
> | +--------+ +--v-----+ +--------+ +--------+ |
> | |dmb_desc| |snd_desc| |dmb_desc| |snd_desc| |
> | +-----|--+ +--|-----+ +-----|--+ +--------+ |
> | +-----|--+ | +-----|--+ |
> | | DMB C | +---------------------------------| DMB D | |
> | +--------+ +--------+ |
> | |
> | +--------------+ |
> | | smc loopback | |
> +---------------------------+--------------+-----------------------------+
>
> # Benchmark Test
>
> * Test environments:
> - VM with Intel Xeon Platinum 8 core 2.50GHz, 16 GiB mem.
> - SMC sndbuf/DMB size 1MB.
> - /sys/devices/virtual/smc/loopback-ism/dmb_copy is set to default 0,
> which means sndbuf and DMB are merged and no data copied between them.
> - /sys/devices/virtual/smc/loopback-ism/dmb_type is set to default 0,
> which means DMB is physically contiguous buffer.
>
> * Test object:
> - TCP: run on TCP loopback.
> - SMC lo: run on SMC loopback device.
>
> 1. ipc-benchmark (see [3])
>
> - ./<foo> -c 1000000 -s 100
>
> TCP SMC-lo
> Message
> rate (msg/s) 80636 149515(+85.42%)
>
> 2. sockperf
>
> - serv: <smc_run> taskset -c <cpu> sockperf sr --tcp
> - clnt: <smc_run> taskset -c <cpu> sockperf { tp | pp } --tcp --msg-size={ 64000 for tp | 14 for pp } -i 127.0.0.1 -t 30
>
> TCP SMC-lo
> Bandwidth(MBps) 4909.36 8197.57(+66.98%)
> Latency(us) 6.098 3.383(-44.52%)
>
> 3. nginx/wrk
>
> - serv: <smc_run> nginx
> - clnt: <smc_run> wrk -t 8 -c 1000 -d 30 http://127.0.0.1:80
>
> TCP SMC-lo
> Requests/s 181685.74 246447.77(+35.65%)
>
> 4. redis-benchmark
>
> - serv: <smc_run> redis-server
> - clnt: <smc_run> redis-benchmark -h 127.0.0.1 -q -t set,get -n 400000 -c 200 -d 1024
>
> TCP SMC-lo
> GET(Requests/s) 85855.34 118553.64(+38.09%)
> SET(Requests/s) 86824.40 125944.58(+45.06%)
>
>
> Change log:
>
> v1->RFC:
> - Patch #9: merge rx_bytes and tx_bytes as xfer_bytes statistics:
> /sys/devices/virtual/smc/loopback-ism/xfer_bytes
> - Patch #10: add support_dmb_nocopy operation to check if SMC-D device supports
> merging sndbuf with peer DMB.
> - Patch #13 & #14: introduce loopback-ism device control of DMB memory type and
> control of whether to merge sndbuf and DMB. They can be respectively set by:
> /sys/devices/virtual/smc/loopback-ism/dmb_type
> /sys/devices/virtual/smc/loopback-ism/dmb_copy
> The motivation for these two control is that a performance bottleneck was
> found when using vzalloced DMB and sndbuf is merged with DMB, and there are
> many CPUs and CONFIG_HARDENED_USERCOPY is set [4]. The bottleneck is caused
> by the lock contention in vmap_area_lock [5] which is involved in memcpy_from_msg()
> or memcpy_to_msg(). Currently, Uladzislau Rezki is working on mitigating the
> vmap lock contention [6]. It has significant effects, but using virtual memory
> still has additional overhead compared to using physical memory.
> So this new version provides controls of dmb_type and dmb_copy to suit
> different scenarios.
> - Some minor changes and comments improvements.
>
> RFC->old version([1]):
> Link: https://lore.kernel.org/netdev/1702214654-32069-1-git-send-email-guwen@linux.alibaba.com/
> - Patch #1: improve the loopback-ism dump, it shows as follows now:
> # smcd d
> FID Type PCI-ID PCHID InUse #LGs PNET-ID
> 0000 0 loopback-ism ffff No 0
> - Patch #3: introduce the smc_ism_set_v2_capable() helper and set
> smc_ism_v2_capable when ISMv2 or virtual ISM is registered,
> regardless of whether there is already a device in smcd device list.
> - Patch #3: loopback-ism will be added into /sys/devices/virtual/smc/loopback-ism/.
> - Patch #8: introduce the runtime switch /sys/devices/virtual/smc/loopback-ism/active
> to activate or deactivate the loopback-ism.
> - Patch #9: introduce the statistics of loopback-ism by
> /sys/devices/virtual/smc/loopback-ism/{{tx|rx}_tytes|dmbs_cnt}.
> - Some minor changes and comments improvements.
>
> [1] https://lore.kernel.org/netdev/1695568613-125057-1-git-send-email-guwen@linux.alibaba.com/
> [2] https://lore.kernel.org/netdev/20231219142616.80697-1-guwen@linux.alibaba.com/
> [3] https://github.com/goldsborough/ipc-bench
> [4] https://lore.kernel.org/all/3189e342-c38f-6076-b730-19a6efd732a5@linux.alibaba.com/
> [5] https://lore.kernel.org/all/238e63cd-e0e8-4fbf-852f-bc4d5bc35d5a@linux.alibaba.com/
> [6] https://lore.kernel.org/all/20240102184633.748113-1-urezki@gmail.com/
>
> Wen Gu (15):
> net/smc: improve SMC-D device dump for virtual ISM
> net/smc: decouple specialized struct from SMC-D DMB registration
> net/smc: introduce virtual ISM device loopback-ism
> net/smc: implement ID-related operations of loopback-ism
> net/smc: implement some unsupported operations of loopback-ism
> net/smc: implement DMB-related operations of loopback-ism
> net/smc: register loopback-ism into SMC-D device list
> net/smc: introduce loopback-ism runtime switch
> net/smc: introduce loopback-ism statistics attributes
> net/smc: add operations to merge sndbuf with peer DMB
> net/smc: attach or detach ghost sndbuf to peer DMB
> net/smc: adapt cursor update when sndbuf and peer DMB are merged
> net/smc: introduce loopback-ism DMB type control
> net/smc: introduce loopback-ism DMB data copy control
> net/smc: implement DMB-merged operations of loopback-ism
>
> drivers/s390/net/ism_drv.c | 2 +-
> include/net/smc.h | 7 +-
> net/smc/Kconfig | 13 +
> net/smc/Makefile | 2 +-
> net/smc/af_smc.c | 28 +-
> net/smc/smc_cdc.c | 58 ++-
> net/smc/smc_cdc.h | 1 +
> net/smc/smc_core.c | 61 +++-
> net/smc/smc_core.h | 1 +
> net/smc/smc_ism.c | 71 +++-
> net/smc/smc_ism.h | 5 +
> net/smc/smc_loopback.c | 718 +++++++++++++++++++++++++++++++++++++
> net/smc/smc_loopback.h | 88 +++++
> 13 files changed, 1026 insertions(+), 29 deletions(-)
> create mode 100644 net/smc/smc_loopback.c
> create mode 100644 net/smc/smc_loopback.h
>
Powered by blists - more mailing lists