netdev - [RFC net-next v3 2/2] net: phy: adin1100: Add interrupt support for link change

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Fri, 19 Jan 2024 10:32:26 +0100
From: Andre Werner <andre.werner@...tec-electronic.com>
To: andrew@...n.ch,
	hkallweit1@...il.com,
	davem@...emloft.net,
	edumazet@...gle.com,
	kuba@...nel.org,
	pabeni@...hat.com
Cc: linux@...linux.org.uk,
	netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Andre Werner <andre.werner@...tec-electronic.com>
Subject: [RFC net-next v3 2/2] net: phy: adin1100: Add interrupt support for link change

An interrupt handler was added to the driver as well as functions
to enable interrupts at the phy.

There are several interrupts maskable at the phy, but only link change
interrupts are handled by the driver yet.

Signed-off-by: Andre Werner <andre.werner@...tec-electronic.com>
---
v3:
- Correct rashly format error that was reported by checker.
---
 drivers/net/phy/adin1100.c | 61 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/drivers/net/phy/adin1100.c b/drivers/net/phy/adin1100.c
index 7619d6185801..32700b44e486 100644
--- a/drivers/net/phy/adin1100.c
+++ b/drivers/net/phy/adin1100.c
@@ -18,6 +18,12 @@
 #define PHY_ID_ADIN1110				0x0283bc91
 #define PHY_ID_ADIN2111				0x0283bca1
 
+#define ADIN_PHY_SUBSYS_IRQ_MASK		0x0021
+#define   ADIN_LINK_STAT_CHNG_IRQ_EN		BIT(1)
+
+#define ADIN_PHY_SUBSYS_IRQ_STATUS		0x0011
+#define   ADIN_LINK_STAT_CHNG			BIT(1)
+
 #define ADIN_FORCED_MODE			0x8000
 #define   ADIN_FORCED_MODE_EN			BIT(0)
 
@@ -136,6 +142,59 @@ static int adin_config_aneg(struct phy_device *phydev)
 	return genphy_c45_config_aneg(phydev);
 }
 
+static int adin_phy_ack_intr(struct phy_device *phydev)
+{
+	/* Clear pending interrupts */
+	int rc = phy_read_mmd(phydev, MDIO_MMD_VEND2,
+			      ADIN_PHY_SUBSYS_IRQ_STATUS);
+
+	return rc < 0 ? rc : 0;
+}
+
+static int adin_config_intr(struct phy_device *phydev)
+{
+	int ret, regval;
+
+	ret = adin_phy_ack_intr(phydev);
+
+	if (ret)
+		return ret;
+
+	regval = phy_read_mmd(phydev, MDIO_MMD_VEND2,
+			      ADIN_PHY_SUBSYS_IRQ_MASK);
+	if (regval < 0)
+		return regval;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		regval |= ADIN_LINK_STAT_CHNG_IRQ_EN;
+	else
+		regval &= ~ADIN_LINK_STAT_CHNG_IRQ_EN;
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_VEND2,
+			    ADIN_PHY_SUBSYS_IRQ_MASK,
+			    regval);
+	return ret;
+}
+
+static irqreturn_t adin_phy_handle_interrupt(struct phy_device *phydev)
+{
+	int irq_status;
+
+	irq_status = phy_read_mmd(phydev, MDIO_MMD_VEND2,
+				  ADIN_PHY_SUBSYS_IRQ_STATUS);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	if (!(irq_status & ADIN_LINK_STAT_CHNG))
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
 static int adin_set_powerdown_mode(struct phy_device *phydev, bool en)
 {
 	int ret;
@@ -275,6 +334,8 @@ static struct phy_driver adin_driver[] = {
 		.probe			= adin_probe,
 		.config_aneg		= adin_config_aneg,
 		.read_status		= adin_read_status,
+		.config_intr		= adin_config_intr,
+		.handle_interrupt	= adin_phy_handle_interrupt,
 		.set_loopback		= adin_set_loopback,
 		.suspend		= adin_suspend,
 		.resume			= adin_resume,
-- 
2.43.0