[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ce51f055-7564-4921-b45a-c4a255a9d797@loongson.cn>
Date: Wed, 24 Jan 2024 17:21:03 +0800
From: Yanteng Si <siyanteng@...ngson.cn>
To: Serge Semin <fancer.lancer@...il.com>
Cc: andrew@...n.ch, hkallweit1@...il.com, peppe.cavallaro@...com,
alexandre.torgue@...s.st.com, joabreu@...opsys.com, Jose.Abreu@...opsys.com,
chenhuacai@...ngson.cn, linux@...linux.org.uk, guyinggang@...ngson.cn,
netdev@...r.kernel.org, chris.chenfeiyang@...il.com
Subject: Re: [PATCH net-next v7 7/9] net: stmmac: dwmac-loongson: Add GNET
support
在 2024/1/1 15:27, Yanteng Si 写道:
>
> 在 2023/12/21 10:34, Serge Semin 写道:
>> On Tue, Dec 19, 2023 at 10:26:47PM +0800, Yanteng Si wrote:
>>> Add Loongson GNET (GMAC with PHY) support. Current GNET does not
>>> support
>>> half duplex mode, and GNET on LS7A only supports ANE when speed is
>>> set to
>>> 1000M.
>>>
>>> Signed-off-by: Yanteng Si <siyanteng@...ngson.cn>
>>> Signed-off-by: Feiyang Chen <chenfeiyang@...ngson.cn>
>>> Signed-off-by: Yinggang Gu <guyinggang@...ngson.cn>
>>> ---
>>> .../ethernet/stmicro/stmmac/dwmac-loongson.c | 79
>>> +++++++++++++++++++
>>> .../ethernet/stmicro/stmmac/stmmac_ethtool.c | 6 ++
>>> include/linux/stmmac.h | 2 +
>>> 3 files changed, 87 insertions(+)
>>>
>>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
>>> b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
>>> index 2c08d5495214..9e4953c7e4e0 100644
>>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
>>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
>>> @@ -168,6 +168,83 @@ static struct stmmac_pci_info
>>> loongson_gmac_pci_info = {
>>> .config = loongson_gmac_config,
>>> };
>>> +static void loongson_gnet_fix_speed(void *priv, unsigned int
>>> speed, unsigned int mode)
>>> +{
>>> + struct net_device *ndev = dev_get_drvdata(priv);
>>> + struct stmmac_priv *ptr = netdev_priv(ndev);
>>> +
>>> + /* The controller and PHY don't work well together.
>>> + * We need to use the PS bit to check if the controller's status
>>> + * is correct and reset PHY if necessary.
>>> + */
>>> + if (speed == SPEED_1000)
>>> + if (readl(ptr->ioaddr + MAC_CTRL_REG) & (1 << 15) /* PS */)
>>> + phy_restart_aneg(ndev->phydev);
>> {} around the outer if please.
> OK.
>>
>>> +}
>>> +
>>> +static int loongson_gnet_data(struct pci_dev *pdev,
>>> + struct plat_stmmacenet_data *plat)
>>> +{
>>> + loongson_default_data(pdev, plat);
>>> +
>>> + plat->multicast_filter_bins = 256;
>>> +
>>> + plat->mdio_bus_data->phy_mask = 0xfffffffb;
>> ~BIT(2)?
> I still need to confirm, please allow me to get back to you later.
Yes, that's fine.
Thanks,
Yanteng
>>
>>> +
>>> + plat->phy_addr = 2;
>>> + plat->phy_interface = PHY_INTERFACE_MODE_INTERNAL;
>>> +
>>> + plat->bsp_priv = &pdev->dev;
>>> + plat->fix_mac_speed = loongson_gnet_fix_speed;
>>> +
>>> + plat->dma_cfg->pbl = 32;
>>> + plat->dma_cfg->pblx8 = true;
>>> +
>>> + plat->clk_ref_rate = 125000000;
>>> + plat->clk_ptp_rate = 125000000;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int loongson_gnet_config(struct pci_dev *pdev,
>>> + struct plat_stmmacenet_data *plat,
>>> + struct stmmac_resources *res,
>>> + struct device_node *np)
>>> +{
>>> + int ret;
>>> + u32 version = readl(res->addr + GMAC_VERSION);
>>> +
>>> + switch (version & 0xff) {
>>> + case DWLGMAC_CORE_1_00:
>>> + ret = loongson_dwmac_config_multi_msi(pdev, plat, res, np, 8);
>>> + break;
>>> + default:
>>> + ret = loongson_dwmac_config_legacy(pdev, plat, res, np);
>> Hm, do you have two versions of Loongson GNET? What does the second
> Yes.
>> one contain in the GMAC_VERSION register then? Can't you distinguish
>> them by the PCI IDs (device, subsystem, revision)?
>
> I'm afraid that's not possible.
>
> Because they have the same pci id and revision.
>
>
> Thanks,
>
> Yanteng
>
>>
>> -Serge(y)
>>
>>> + break;
>>> + }
>>> +
>>> + switch (pdev->revision) {
>>> + case 0x00:
>>> + plat->flags |=
>>> + FIELD_PREP(STMMAC_FLAG_DISABLE_HALF_DUPLEX, 1) |
>>> + FIELD_PREP(STMMAC_FLAG_DISABLE_FORCE_1000, 1);
>>> + break;
>>> + case 0x01:
>>> + plat->flags |=
>>> + FIELD_PREP(STMMAC_FLAG_DISABLE_HALF_DUPLEX, 1);
>>> + break;
>>> + default:
>>> + break;
>>> + }
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static struct stmmac_pci_info loongson_gnet_pci_info = {
>>> + .setup = loongson_gnet_data,
>>> + .config = loongson_gnet_config,
>>> +};
>>> +
>>> static int loongson_dwmac_probe(struct pci_dev *pdev,
>>> const struct pci_device_id *id)
>>> {
>>> @@ -318,9 +395,11 @@ static SIMPLE_DEV_PM_OPS(loongson_dwmac_pm_ops,
>>> loongson_dwmac_suspend,
>>> loongson_dwmac_resume);
>>> #define PCI_DEVICE_ID_LOONGSON_GMAC 0x7a03
>>> +#define PCI_DEVICE_ID_LOONGSON_GNET 0x7a13
>>> static const struct pci_device_id loongson_dwmac_id_table[] = {
>>> { PCI_DEVICE_DATA(LOONGSON, GMAC, &loongson_gmac_pci_info) },
>>> + { PCI_DEVICE_DATA(LOONGSON, GNET, &loongson_gnet_pci_info) },
>>> {}
>>> };
>>> MODULE_DEVICE_TABLE(pci, loongson_dwmac_id_table);
>>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
>>> b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
>>> index 8105ce47c6ad..d6939eb9a0d8 100644
>>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
>>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
>>> @@ -420,6 +420,12 @@ stmmac_ethtool_set_link_ksettings(struct
>>> net_device *dev,
>>> return 0;
>>> }
>>> + if (FIELD_GET(STMMAC_FLAG_DISABLE_FORCE_1000,
>>> priv->plat->flags)) {
>>> + if (cmd->base.speed == SPEED_1000 &&
>>> + cmd->base.autoneg != AUTONEG_ENABLE)
>>> + return -EOPNOTSUPP;
>>> + }
>>> +
>>> return phylink_ethtool_ksettings_set(priv->phylink, cmd);
>>> }
>>> diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
>>> index f07f79d50b06..067030cdb60f 100644
>>> --- a/include/linux/stmmac.h
>>> +++ b/include/linux/stmmac.h
>>> @@ -222,6 +222,8 @@ struct dwmac4_addrs {
>>> #define STMMAC_FLAG_EN_TX_LPI_CLOCKGATING BIT(11)
>>> #define STMMAC_FLAG_HWTSTAMP_CORRECT_LATENCY BIT(12)
>>> #define STMMAC_FLAG_HAS_LGMAC BIT(13)
>>> +#define STMMAC_FLAG_DISABLE_HALF_DUPLEX BIT(14)
>>> +#define STMMAC_FLAG_DISABLE_FORCE_1000 BIT(15)
>>> struct plat_stmmacenet_data {
>>> int bus_id;
>>> --
>>> 2.31.4
>>>
Powered by blists - more mailing lists