lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZbKJv84vGXInRIo1@makrotopia.org>
Date: Thu, 25 Jan 2024 16:18:07 +0000
From: Daniel Golle <daniel@...rotopia.org>
To: Arınç ÜNAL <arinc.unal@...nc9.com>
Cc: DENG Qingfang <dqfext@...il.com>, Sean Wang <sean.wang@...iatek.com>,
	Andrew Lunn <andrew@...n.ch>,
	Florian Fainelli <f.fainelli@...il.com>,
	Vladimir Oltean <olteanv@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Matthias Brugger <matthias.bgg@...il.com>,
	AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-mediatek@...ts.infradead.org, John Crispin <john@...ozen.org>
Subject: Re: [PATCH net] net: dsa: mt7530: fix 10M/100M speed on MT7988 switch

On Thu, Jan 25, 2024 at 12:49:19PM +0300, Arınç ÜNAL wrote:
> On 24/01/2024 08:17, Daniel Golle wrote:
> > Setup PMCR port register for actual speed and duplex on internally
> > connected PHYs of the MT7988 built-in switch. This fixes links with
> > speeds other than 1000M.
> > 
> > Fixes: ("110c18bfed414 net: dsa: mt7530: introduce driver for MT7988 built-in switch")
> > Signed-off-by: Daniel Golle <daniel@...rotopia.org>
> 
> Acked-by: Arınç ÜNAL <arinc.unal@...nc9.com>
> 
> I'm wondering why we manually set speed and duplex for these interface
> modes in the first place. I don't how it works for
> PHY_INTERFACE_MODE_INTERNAL but, at least for PHY_INTERFACE_MODE_TRGMII and
> 802.3z interfaces, phylink should already supply proper speed and duplex.

It's true that duplex should always be set to full-duplex already by
phylink. However, speed could be 2500MBit/s (2500Base-X) or 2000MBit/s
(?, TRGMII) and we yet need to program the PCR like if it was
1000MBit/s.

Regarding the INTERNAL case: it was added by mistake. In case of
MT7988, all ports of the switch are connected via INTERNAL links,
however, the PHYs still need adjustment of the PCR register just like
on all other MT753x switches and the CPU port is setup elsewhere
anyway.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ