lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <a5b37e23-5f88-4a23-a1e3-908513a64f03@arinc9.com>
Date: Fri, 26 Jan 2024 01:48:54 +0300
From: Arınç ÜNAL <arinc.unal@...nc9.com>
To: Daniel Golle <daniel@...rotopia.org>,
 Landen Chao <Landen.Chao@...iatek.com>, DENG Qingfang <dqfext@...il.com>,
 Sean Wang <sean.wang@...iatek.com>, Andrew Lunn <andrew@...n.ch>,
 Florian Fainelli <f.fainelli@...il.com>, Vladimir Oltean
 <olteanv@...il.com>, "David S. Miller" <davem@...emloft.net>,
 Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
 Paolo Abeni <pabeni@...hat.com>, Matthias Brugger <matthias.bgg@...il.com>,
 AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
 Russell King <linux@...linux.org.uk>
Cc: mithat.guner@...ont.com, erkin.bozoglu@...ont.com,
 Bartel Eerdekens <bartel.eerdekens@...stell8.be>, netdev@...r.kernel.org,
 linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
 linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH net-next v3 6/7] net: dsa: mt7530: do not set
 priv->p5_interface on mt7530_setup_port5()

Vladimir could you review this too? This is the only patch remaining
without a review or ACK.

Arınç

On 22.01.2024 08:35, Arınç ÜNAL via B4 Relay wrote:
> From: Arınç ÜNAL <arinc.unal@...nc9.com>
> 
> Running mt7530_setup_port5() from mt7530_setup() used to handle all cases
> of configuring port 5, including phylink.
> 
> Setting priv->p5_interface under mt7530_setup_port5() makes sure that
> mt7530_setup_port5() from mt753x_phylink_mac_config() won't run.
> 
> The commit ("net: dsa: mt7530: improve code path for setting up port 5")
> makes so that mt7530_setup_port5() from mt7530_setup() runs only on
> non-phylink cases.
> 
> Get rid of unnecessarily setting priv->p5_interface under
> mt7530_setup_port5() as port 5 phylink configuration will be done by
> running mt7530_setup_port5() from mt753x_phylink_mac_config() now.
> 
> Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
> ---
>   drivers/net/dsa/mt7530.c | 2 --
>   1 file changed, 2 deletions(-)
> 
> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
> index 33c15f10de34..5394d8c6a40e 100644
> --- a/drivers/net/dsa/mt7530.c
> +++ b/drivers/net/dsa/mt7530.c
> @@ -978,8 +978,6 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
>   	dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n",
>   		val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface));
>   
> -	priv->p5_interface = interface;
> -
>   unlock_exit:
>   	mutex_unlock(&priv->reg_mutex);
>   }
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ