netdev - [PATCHv2 net-next 2/4] selftests: bonding: use tc filter to check if LACP was sent

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240201062954.421145-3-liuhangbin@gmail.com>
Date: Thu,  1 Feb 2024 14:29:52 +0800
From: Hangbin Liu <liuhangbin@...il.com>
To: netdev@...r.kernel.org
Cc: Jay Vosburgh <j.vosburgh@...il.com>,
	"David S . Miller" <davem@...emloft.net>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Eric Dumazet <edumazet@...gle.com>,
	Liang Li <liali@...hat.com>,
	Przemek Kitszel <przemyslaw.kitszel@...el.com>,
	Hangbin Liu <liuhangbin@...il.com>
Subject: [PATCHv2 net-next 2/4] selftests: bonding: use tc filter to check if LACP was sent

Use tc filter to check if LACP was sent, which is accurate and save
more time.

No need to remove bonding module as some test env may buildin bonding.
And the bond link has been deleted.

Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@...el.com>
Signed-off-by: Hangbin Liu <liuhangbin@...il.com>
---
 .../net/bonding/bond-break-lacpdu-tx.sh       | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh b/tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh
index 6358df5752f9..01dcf501da41 100755
--- a/tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh
+++ b/tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh
@@ -20,21 +20,21 @@
 #    +------+ +------+
 #
 # We use veths instead of physical interfaces
+REQUIRE_MZ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+source "$lib_dir"/net_forwarding_lib.sh
 
 set -e
-tmp=$(mktemp -q dump.XXXXXX)
 cleanup() {
 	ip link del fab-br0 >/dev/null 2>&1 || :
 	ip link del fbond  >/dev/null 2>&1 || :
 	ip link del veth1-bond  >/dev/null 2>&1 || :
 	ip link del veth2-bond  >/dev/null 2>&1 || :
-	modprobe -r bonding  >/dev/null 2>&1 || :
-	rm -f -- ${tmp}
 }
 
 trap cleanup 0 1 2
 cleanup
-sleep 1
 
 # create the bridge
 ip link add fab-br0 address 52:54:00:3B:7C:A6 mtu 1500 type bridge \
@@ -67,13 +67,12 @@ ip link set fab-br0 up
 ip link set fbond up
 ip addr add dev fab-br0 10.0.0.3
 
-tcpdump -n -i veth1-end -e ether proto 0x8809 >${tmp} 2>&1 &
-sleep 15
-pkill tcpdump >/dev/null 2>&1
 rc=0
-num=$(grep "packets captured" ${tmp} | awk '{print $1}')
-if test "$num" -gt 0; then
-	echo "PASS, captured ${num}"
+tc qdisc add dev veth1-end clsact
+tc filter add dev veth1-end ingress protocol 0x8809 pref 1 handle 101 flower skip_hw action pass
+if slowwait_for_counter 15 2 \
+	tc_rule_handle_stats_get "dev veth1-end ingress" 101 ".packets" "" &> /dev/null; then
+	echo "PASS, captured 2"
 else
 	echo "FAIL"
 	rc=1
-- 
2.43.0