lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <d8838049-b0f3-4531-8ae0-83a7a7f14526@arinc9.com>
Date: Sun, 4 Feb 2024 21:03:12 +0300
From: Arınç ÜNAL <arinc.unal@...nc9.com>
To: Daniel Golle <daniel@...rotopia.org>, DENG Qingfang <dqfext@...il.com>,
 Sean Wang <sean.wang@...iatek.com>, Andrew Lunn <andrew@...n.ch>,
 Florian Fainelli <f.fainelli@...il.com>, Vladimir Oltean
 <olteanv@...il.com>, "David S. Miller" <davem@...emloft.net>,
 Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
 Paolo Abeni <pabeni@...hat.com>, Matthias Brugger <matthias.bgg@...il.com>,
 AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
 Russell King <linux@...linux.org.uk>
Cc: mithat.guner@...ont.com, erkin.bozoglu@...ont.com,
 Bartel Eerdekens <bartel.eerdekens@...stell8.be>, netdev@...r.kernel.org,
 linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
 linux-mediatek@...ts.infradead.org,
 "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
Subject: Re: [PATCH net-next v4 3/7] net: dsa: mt7530: simplify
 mt7530_pad_clk_setup()

On 4.02.2024 19:34, Arınç ÜNAL via B4 Relay wrote:
> From: Arınç ÜNAL <arinc.unal@...nc9.com>
> 
> This code is from before this driver was converted to phylink API. Phylink
> deals with the unsupported interface cases before mt7530_pad_clk_setup() is
> run. Therefore, the default case would never run. However, it must be
> defined nonetheless to handle all the remaining enumeration values, the
> phy-modes.
> 
> Switch to if statement for RGMII and return which simplifies the code and
> saves an indent.
> 
> Set P6_INTF_MODE, which is the three least significant bits of the
> MT7530_P6ECR register, to 0 for RGMII even though it will already be 0
> after reset. This is to keep supporting dynamic reconfiguration of the port
> in the case the interface changes from TRGMII to RGMII.
> 
> Disable the TRGMII clocks for all cases. They will be enabled if TRGMII is
> being used.
> 
> Read XTAL after checking for RGMII as it's only needed for the TRGMII
> interface mode.
> 
> Reviewed-by: Daniel Golle <daniel@...rotopia.org>
> Reviewed-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
> Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
> ---
>   drivers/net/dsa/mt7530.c | 91 +++++++++++++++++++++---------------------------
>   1 file changed, 40 insertions(+), 51 deletions(-)
> 
> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
> index 8b8469eba863..82e90da1e52b 100644
> --- a/drivers/net/dsa/mt7530.c
> +++ b/drivers/net/dsa/mt7530.c
> @@ -418,64 +418,53 @@ static int
>   mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
>   {
>   	struct mt7530_priv *priv = ds->priv;
> -	u32 ncpo1, ssc_delta, trgint, xtal;
> +	u32 ncpo1, ssc_delta, xtal;
>   
> -	xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK;
> +	/* Disable the MT7530 TRGMII clocks */
> +	core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN);
>   
> -	switch (interface) {
> -	case PHY_INTERFACE_MODE_RGMII:
> -		trgint = 0;
> -		break;
> -	case PHY_INTERFACE_MODE_TRGMII:
> -		trgint = 1;
> -		if (xtal == HWTRAP_XTAL_25MHZ)
> -			ssc_delta = 0x57;
> -		else
> -			ssc_delta = 0x87;
> -		if (priv->id == ID_MT7621) {
> -			/* PLL frequency: 125MHz: 1.0GBit */
> -			if (xtal == HWTRAP_XTAL_40MHZ)
> -				ncpo1 = 0x0640;
> -			if (xtal == HWTRAP_XTAL_25MHZ)
> -				ncpo1 = 0x0a00;
> -		} else { /* PLL frequency: 250MHz: 2.0Gbit */
> -			if (xtal == HWTRAP_XTAL_40MHZ)
> -				ncpo1 = 0x0c80;
> -			if (xtal == HWTRAP_XTAL_25MHZ)
> -				ncpo1 = 0x1400;
> -		}
> -		break;
> -	default:
> -		dev_err(priv->dev, "xMII interface %d not supported\n",
> -			interface);
> -		return -EINVAL;
> +	if (interface == PHY_INTERFACE_MODE_RGMII) {
> +		mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK,
> +			   P6_INTF_MODE(0));
> +		return;

This should be "return 0;". I will address this.

pw-bot: cr

Arınç

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ