Message-ID: <Zb/EZSqwChexAuso@shell.armlinux.org.uk>
Date: Sun, 4 Feb 2024 17:07:49 +0000
From: "Russell King (Oracle)" <linux@...linux.org.uk>
To: Arınç ÜNAL <arinc.unal@...nc9.com>
Cc: Daniel Golle <daniel@...rotopia.org>, DENG Qingfang <dqfext@...il.com>,
	Sean Wang <sean.wang@...iatek.com>, Andrew Lunn <andrew@...n.ch>,
	Florian Fainelli <f.fainelli@...il.com>,
	Vladimir Oltean <olteanv@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Matthias Brugger <matthias.bgg@...il.com>,
	AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
	mithat.guner@...ont.com, erkin.bozoglu@...ont.com,
	Bartel Eerdekens <bartel.eerdekens@...stell8.be>,
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH net-next v3 4/7] net: dsa: mt7530: move XTAL check to
 mt7530_setup()

On Sun, Feb 04, 2024 at 07:51:49PM +0300, Arınç ÜNAL wrote:
> On 4.02.2024 19:38, Russell King (Oracle) wrote:
> > On Sun, Feb 04, 2024 at 06:55:14PM +0300, Arınç ÜNAL wrote:
> > > On 4.02.2024 17:18, Russell King (Oracle) wrote:
> > > > On Sun, Feb 04, 2024 at 04:55:40PM +0300, Arınç ÜNAL wrote:
> > > > > This is not about laziness. This is before patch 2:
> > > > > 
> > > > > phylink_mac_ops :: mac_config() -> dsa_port_phylink_mac_config()
> > > > > -> dsa_switch_ops :: phylink_mac_config() -> mt753x_phylink_mac_config()
> > > > >      -> mt753x_mac_config()
> > > > >         -> mt753x_info :: mac_port_config() -> mt7530_mac_config()
> > > > >            -> mt7530_setup_port5()
> > > > >      -> mt753x_pad_setup()
> > > > >         -> mt753x_info :: pad_setup() -> mt7530_pad_clk_setup()
> > > > > 
> > > > > This is after:
> > > > > 
> > > > > phylink_mac_ops :: mac_config() -> dsa_port_phylink_mac_config()
> > > > > -> dsa_switch_ops :: phylink_mac_config() -> mt753x_phylink_mac_config()
> > > > >      -> mt753x_mac_config()
> > > > >         -> mt753x_info :: mac_port_config() -> mt7530_mac_config()
> > > > >            -> mt7530_setup_port5()
> > > > >            -> mt7530_setup_port6()
> > > > > 
> > > > > Patch 2 does not move mt7530_setup_port6() to be called from
> > > > > phylink_mac_ops :: mac_config(), it already is. There is no valid reason to
> > > > > reorder the patches.
> > > > > 
> > > > > My response to Russell should've stated this instead of focusing on his
> > > > > second sentence.
> > > > 
> > > > This patch moves the test for a 20MHz crystal to mt7530_setup(),
> > > > which is something that is entirely orthogonal to patch 2, which
> > > > can be done cleanly (I've just applied the patches in the original
> > > > order and then reordered them:
> > > > 
> > > > 98c481f5d706 net: dsa: mt7530: do not clear config->supported_interfaces
> > > > 93c6b53b17f4 net: dsa: mt7530: correct port capabilities of MT7988
> > > > c9c6d4c51a1d net: dsa: mt7530: simplify mt7530_setup_port6() and change to void
> > > > adfa948253e0 net: dsa: mt7530: remove pad_setup function pointer
> > > > 57e21e6c2fc0 net: dsa: mt7530: call port 6 setup from mt7530_mac_config()
> > > > 959a0f9323c8 net: dsa: mt7530: move XTAL check to mt7530_setup()
> > > > 856ab64a22ef net: dsa: mt7530: empty default case on mt7530_setup_port5()
> > > > 
> > > > No problems. The end result is identical comparing the git tree at the
> > > > original "move XTAL" patch with adfa948253e0.
> > > > 
> > > > Now, if we look at "net: dsa: mt7530: remove pad_setup function pointer"
> > > > we can see that yes, the pad_setup() method was called from mac_confing,
> > > > but this is the exact contents of that patch removing the callsite:
> > > > 
> > > > -               mt753x_pad_setup(ds, state);
> > > > 
> > > > This returns an integer, which may be an error code, which is ignored.
> > > > Therefore, if the XTAL frequency check fires, and mt753x_pad_setup()
> > > > returns an error, it is ignored today.
> > > > 
> > > > After "net: dsa: mt7530: call port 6 setup from mt7530_mac_config()"
> > > > the renamed pad_setup() method is now called from mac_config() thusly:
> > > > 
> > > > +               ret = mt7530_setup_port6(priv->ds, interface);
> > > > +               if (ret)
> > > > +                       return ret;
> > > > 
> > > > So now the error checks cause mt7530_mac_config() to return an error
> > > > which in turn causes mt753x_mac_config() to fail, and therefore
> > > > mt753x_phylink_mac_config() has different behaviour.
> > > > 
> > > > So, patch 2 changes the driver behaviour in the case of a 20MHz XTAL,
> > > > which is then changed again by patch 4.
> > > > 
> > > > It would be better to have only one change of behaviour by moving
> > > > patch 4 before patch 2.
> > > 
> > > If the idea is to not bring any more error returns to mt753x_mac_config()
> > > because the return code is actually checked for that, I should do a bit
> > > more effort and put patch 5 before patch 2 as well, to live up to what you
> > > originally requested.
> > 
> > I assume you are referring to getting rid of the default case in
> > mt7530_pad_clk_setup().
> > 
> > In patch "net: dsa: mt7530: call port 6 setup from mt7530_mac_config()"
> > where you move this to be called from mt7530_mac_config(), you add it
> > as:
> > 
> > +       } else if (port == 6) {
> > +               ret = mt7530_setup_port6(priv->ds, interface);
> > +               if (ret)
> > +                       return ret;
> > +       }
> > 
> > So it is only called for port 6. The switch within the called function
> > deals with PHY_INTERFACE_MODE_RGMII and PHY_INTERFACE_MODE_TRGMII.
> > Anything else results in the use of the default case, and thus
> > returning an error.
> > 
> > Since mt7530_mac_port_get_caps() does this for port 6:
> > 
> >                  __set_bit(PHY_INTERFACE_MODE_RGMII,
> >                            config->supported_interfaces);
> >                  __set_bit(PHY_INTERFACE_MODE_TRGMII,
> >                            config->supported_interfaces);
> > 
> > mt7530_setup_port6() will only ever be called for these two modes,
> > which means that the default case is unreachable, thus we will never
> > execute that path, thus whether that path returns an error or not is
> > completely irrelevant.
> > 
> > The only case in mt7530_setup_port6() / mt7530_pad_clk_setup() which
> > can today return an error is the XTAL check.
> > 
> > Therefore, my suggestion makes complete sense, and there is no need
> > to also move patch 5.
> 
> Understood. I've already submitted v4 which moves patch 5. The remaining
> benefit is that there're fewer code changes as I don't need to add an error
> return for mt7530_setup_port6() and then remove it.

I'm pretty sure netdev has a rule _not_ to submit the next version of
a patch series if discussion about the previous is still ongoing...
but I can't find any of the netdev rules in Documentation/networking
anymore, and nothing stands out in Documentation/process... ah,
Documentation/process/maintainer-netdev.rst, and here we are:

"Make sure you address all the feedback in your new posting. Do not post
a new
version of the code if the discussion about the previous version is
still
ongoing, unless directly instructed by a reviewer."

Discussion was still ongoing over this point, so ideally you should
have waited instead of presenting a fait-accompli _during_ the
ongoing discussion.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!

Powered by blists - more mailing lists