[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <52aodgfoh35zxpube73w53jv7rno5k7vfwdy276zjqpcbewk5t@4f2igj76y5ri>
Date: Tue, 6 Feb 2024 01:18:45 +0300
From: Serge Semin <fancer.lancer@...il.com>
To: Yanteng Si <siyanteng@...ngson.cn>
Cc: andrew@...n.ch, hkallweit1@...il.com, peppe.cavallaro@...com,
alexandre.torgue@...s.st.com, joabreu@...opsys.com, Jose.Abreu@...opsys.com,
chenhuacai@...ngson.cn, linux@...linux.org.uk, guyinggang@...ngson.cn,
netdev@...r.kernel.org, chris.chenfeiyang@...il.com
Subject: Re: [PATCH net-next v8 11/11] net: stmmac: dwmac-loongson: Disable
coe for some Loongson GNET
On Tue, Jan 30, 2024 at 04:49:16PM +0800, Yanteng Si wrote:
> Some chips of Loongson GNET does not support coe, so disable them.
s/coe/Tx COE
>
> Set dma_cap->tx_coe to 0 and overwrite get_hw_feature.
>
> Signed-off-by: Yanteng Si <siyanteng@...ngson.cn>
> Signed-off-by: Feiyang Chen <chenfeiyang@...ngson.cn>
> Signed-off-by: Yinggang Gu <guyinggang@...ngson.cn>
> ---
> .../ethernet/stmicro/stmmac/dwmac-loongson.c | 46 +++++++++++++++++++
> 1 file changed, 46 insertions(+)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> index b78a73ea748b..8018d7d5f31b 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> @@ -196,6 +196,51 @@ static int dwlgmac_dma_interrupt(struct stmmac_priv *priv, void __iomem *ioaddr,
> return ret;
> }
>
> +static int dwlgmac_get_hw_feature(void __iomem *ioaddr,
Please use GNET-specific prefix.
> + struct dma_features *dma_cap)
> +{
> + u32 hw_cap = readl(ioaddr + DMA_HW_FEATURE);
> +
> + if (!hw_cap) {
> + /* 0x00000000 is the value read on old hardware that does not
> + * implement this register
> + */
> + return -EOPNOTSUPP;
> + }
This doesn't seems like possible. All your devices have the
HW-features register. If so please drop.
> +
> + dma_cap->mbps_10_100 = (hw_cap & DMA_HW_FEAT_MIISEL);
> + dma_cap->mbps_1000 = (hw_cap & DMA_HW_FEAT_GMIISEL) >> 1;
> + dma_cap->half_duplex = (hw_cap & DMA_HW_FEAT_HDSEL) >> 2;
> + dma_cap->hash_filter = (hw_cap & DMA_HW_FEAT_HASHSEL) >> 4;
> + dma_cap->multi_addr = (hw_cap & DMA_HW_FEAT_ADDMAC) >> 5;
> + dma_cap->pcs = (hw_cap & DMA_HW_FEAT_PCSSEL) >> 6;
> + dma_cap->sma_mdio = (hw_cap & DMA_HW_FEAT_SMASEL) >> 8;
> + dma_cap->pmt_remote_wake_up = (hw_cap & DMA_HW_FEAT_RWKSEL) >> 9;
> + dma_cap->pmt_magic_frame = (hw_cap & DMA_HW_FEAT_MGKSEL) >> 10;
> + /* MMC */
> + dma_cap->rmon = (hw_cap & DMA_HW_FEAT_MMCSEL) >> 11;
> + /* IEEE 1588-2002 */
> + dma_cap->time_stamp =
> + (hw_cap & DMA_HW_FEAT_TSVER1SEL) >> 12;
> + /* IEEE 1588-2008 */
> + dma_cap->atime_stamp = (hw_cap & DMA_HW_FEAT_TSVER2SEL) >> 13;
> + /* 802.3az - Energy-Efficient Ethernet (EEE) */
> + dma_cap->eee = (hw_cap & DMA_HW_FEAT_EEESEL) >> 14;
> + dma_cap->av = (hw_cap & DMA_HW_FEAT_AVSEL) >> 15;
> + /* TX and RX csum */
> + dma_cap->tx_coe = 0;
> + dma_cap->rx_coe_type1 = (hw_cap & DMA_HW_FEAT_RXTYP1COE) >> 17;
> + dma_cap->rx_coe_type2 = (hw_cap & DMA_HW_FEAT_RXTYP2COE) >> 18;
> + dma_cap->rxfifo_over_2048 = (hw_cap & DMA_HW_FEAT_RXFIFOSIZE) >> 19;
> + /* TX and RX number of channels */
> + dma_cap->number_rx_channel = (hw_cap & DMA_HW_FEAT_RXCHCNT) >> 20;
> + dma_cap->number_tx_channel = (hw_cap & DMA_HW_FEAT_TXCHCNT) >> 22;
> + /* Alternate (enhanced) DESC mode */
> + dma_cap->enh_desc = (hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24;
I am not sure whether you need to parse the capability register at all
seeing this is a GNET-specific method. For that device all the
capabilities are already known and can be just initialized in this
method.
-Serge(y)
> +
> + return 0;
> +}
> +
> struct stmmac_pci_info {
> int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
> int (*config)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat,
> @@ -542,6 +587,7 @@ static int loongson_dwmac_probe(struct pci_dev *pdev,
> ld->dwlgmac_dma_ops = dwmac1000_dma_ops;
> ld->dwlgmac_dma_ops.init_chan = dwlgmac_dma_init_channel;
> ld->dwlgmac_dma_ops.dma_interrupt = dwlgmac_dma_interrupt;
> + ld->dwlgmac_dma_ops.get_hw_feature = dwlgmac_get_hw_feature;
>
> plat->setup = loongson_setup;
> ret = loongson_dwmac_config_multi_msi(pdev, plat, &res, np, 8);
> --
> 2.31.4
>
Powered by blists - more mailing lists