netdev - Re: [PATCH net-next v5 3/7] net: dsa: mt7530: simplify mt7530_pad_clk

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240206105049.rldesxnyjs4dungi@skbuf>
Date: Tue, 6 Feb 2024 12:50:49 +0200
From: Vladimir Oltean <olteanv@...il.com>
To: arinc.unal@...nc9.com
Cc: Daniel Golle <daniel@...rotopia.org>, DENG Qingfang <dqfext@...il.com>,
	Sean Wang <sean.wang@...iatek.com>, Andrew Lunn <andrew@...n.ch>,
	Florian Fainelli <f.fainelli@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Matthias Brugger <matthias.bgg@...il.com>,
	AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
	Russell King <linux@...linux.org.uk>, mithat.guner@...ont.com,
	erkin.bozoglu@...ont.com,
	Bartel Eerdekens <bartel.eerdekens@...stell8.be>,
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-mediatek@...ts.infradead.org,
	"Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
Subject: Re: [PATCH net-next v5 3/7] net: dsa: mt7530: simplify
 mt7530_pad_clk_setup()

On Tue, Feb 06, 2024 at 01:08:04AM +0300, Arınç ÜNAL via B4 Relay wrote:
> From: Arınç ÜNAL <arinc.unal@...nc9.com>
> 
> This code is from before this driver was converted to phylink API. Phylink
> deals with the unsupported interface cases before mt7530_pad_clk_setup() is
> run. Therefore, the default case would never run. However, it must be
> defined nonetheless to handle all the remaining enumeration values, the
> phy-modes.
> 
> Switch to if statement for RGMII and return which simplifies the code and
> saves an indent.
> 
> Set P6_INTF_MODE, which is the three least significant bits of the
> MT7530_P6ECR register, to 0 for RGMII even though it will already be 0
> after reset. This is to keep supporting dynamic reconfiguration of the port
> in the case the interface changes from TRGMII to RGMII.
> 
> Disable the TRGMII clocks for all cases. They will be enabled if TRGMII is
> being used.
> 
> Read XTAL after checking for RGMII as it's only needed for the TRGMII
> interface mode.
> 
> Reviewed-by: Daniel Golle <daniel@...rotopia.org>
> Reviewed-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
> Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
> ---

Reviewed-by: Vladimir Oltean <olteanv@...il.com>