lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <3rdpfjzahlcdxxszezxrk7vwvgwzpxxgsct32ydinki2xzbxz7@z2suuxtjnwjb>
Date: Wed, 7 Feb 2024 10:35:12 +0100
From: Markus Schneider-Pargmann <msp@...libre.com>
To: Marc Kleine-Budde <mkl@...gutronix.de>, 
	Chandrasekar Ramakrishnan <rcsekar@...sung.com>, Wolfgang Grandegger <wg@...ndegger.com>, 
	"David S . Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, 
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, 
	Tony Lindgren <tony@...mide.com>, Judith Mendez <jm@...com>
Cc: Vincent MAILHOL <mailhol.vincent@...adoo.fr>, 
	Simon Horman <horms@...nel.org>, linux-can@...r.kernel.org, netdev@...r.kernel.org, 
	linux-kernel@...r.kernel.org, Julien Panis <jpanis@...libre.com>
Subject: Re: [PATCH 00/14] can: m_can: Optimizations for m_can/tcan part 2

Sorry, this is of course v7, forgot to add --reroll-count.

Best,
Markus

On Wed, Feb 07, 2024 at 10:32:06AM +0100, Markus Schneider-Pargmann wrote:
> Hi Marc, Simon, Martin and everyone,
> 
> v7 is a rebase on v6.8. During my am62 tests I discovered some problems
> which are fixed with this update.
> 
> @Simon: I had to remove most of your reviews again, due to a few
> fixes I made.
> 
> The series implements many small and bigger throughput improvements and
> adds rx/tx coalescing at the end.
> 
> Based on v6.8-rc1. Also available at
> https://gitlab.baylibre.com/msp8/linux/-/tree/topic/mcan-optimization/v6.8?ref_type=heads
> 
> Best,
> Markus
> 
> Changes in v7:
> - Rebased to v6.8-rc1
> - Fixed NULL pointer dereference in m_can_clean() on am62 that happened
>   when doing ip link up, ip link down, ip link up
> - Fixed a racecondition on am62 observed with high throughput tests.
>   netdev_completed_queue() was called before netdev_sent_queue() as the
>   interrupt was processed so fast. netdev_sent_queue() is now reported
>   before the actual sent is done.
> - Fixed an initializing issue on am62 where active interrupts are
>   getting lost between runs. Fixed by resetting cdev->active_interrupts
>   in m_can_disable_all_interrupts()
> - Removed m_can_start_fast_xmit() because of a reordering of operations
>   due to above mentioned racecondition
> 
> Changes in v6:
> - Rebased to v6.6-rc2
> - Added two small changes for the newly integrated polling feature
> - Reuse the polling hrtimer for coalescing as the timer used for
>   coalescing has a similar purpose as the one for polling. Also polling
>   and coalescing will never be active at the same time.
> 
> Changes in v5:
> - Add back parenthesis in m_can_set_coalesce(). This will make
>   checkpatch unhappy but gcc happy.
> - Remove unused fifo_header variable in m_can_tx_handler().
> - Rebased to v6.5-rc1
> 
> Changes in v4:
> - Create and use struct m_can_fifo_element in m_can_tx_handler
> - Fix memcpy_and_pad to copy the full buffer
> - Fixed a few checkpatch warnings
> - Change putidx to be unsigned
> - Print hard_xmit error only once when TX FIFO is full
> 
> Changes in v3:
> - Remove parenthesis in error messages
> - Use memcpy_and_pad for buffer copy in 'can: m_can: Write transmit
>   header and data in one transaction'.
> - Replace spin_lock with spin_lock_irqsave. I got a report of a
>   interrupt that was calling start_xmit just after the netqueue was
>   woken up before the locked region was exited. spin_lock_irqsave should
>   fix this. I attached the full stack at the end of the mail if someone
>   wants to know.
> - Rebased to v6.3-rc1.
> - Removed tcan4x5x patches from this series.
> 
> Changes in v2:
> - Rebased on v6.2-rc5
> - Fixed missing/broken accounting for non peripheral m_can devices.
> 
> previous versions:
> v1 - https://lore.kernel.org/lkml/20221221152537.751564-1-msp@baylibre.com
> v2 - https://lore.kernel.org/lkml/20230125195059.630377-1-msp@baylibre.com
> v3 - https://lore.kernel.org/lkml/20230315110546.2518305-1-msp@baylibre.com/
> v4 - https://lore.kernel.org/lkml/20230621092350.3130866-1-msp@baylibre.com/
> v5 - https://lore.kernel.org/lkml/20230718075708.958094-1-msp@baylibre.com
> v6 - https://lore.kernel.org/lkml/20230929141304.3934380-1-msp@baylibre.com
> 
> Markus Schneider-Pargmann (14):
>   can: m_can: Start/Cancel polling timer together with interrupts
>   can: m_can: Move hrtimer init to m_can_class_register
>   can: m_can: Write transmit header and data in one transaction
>   can: m_can: Implement receive coalescing
>   can: m_can: Implement transmit coalescing
>   can: m_can: Add rx coalescing ethtool support
>   can: m_can: Add tx coalescing ethtool support
>   can: m_can: Use u32 for putidx
>   can: m_can: Cache tx putidx
>   can: m_can: Use the workqueue as queue
>   can: m_can: Introduce a tx_fifo_in_flight counter
>   can: m_can: Use tx_fifo_in_flight for netif_queue control
>   can: m_can: Implement BQL
>   can: m_can: Implement transmit submission coalescing
> 
>  drivers/net/can/m_can/m_can.c          | 551 ++++++++++++++++++-------
>  drivers/net/can/m_can/m_can.h          |  34 +-
>  drivers/net/can/m_can/m_can_platform.c |   4 -
>  3 files changed, 439 insertions(+), 150 deletions(-)
> 
> -- 
> 2.43.0
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ