[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID:
<AS1PR03MB8189F4C542AFE05790E8DFA082442@AS1PR03MB8189.eurprd03.prod.outlook.com>
Date: Thu, 8 Feb 2024 18:21:54 +0100
From: Sergio Palumbo <palumbo.ser@...look.it>
To: "Russell King (Oracle)" <linux@...linux.org.uk>
Cc: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next] net: sfp: add quirk for OEM DFP-34X-2C2 GPON ONU
SFP
Hi Russell,
GPON modules we are talking about are all ONT/ONU and all the ONT ONU
are configured by OLT unless you have a modded firmware.
ODI DFP-34X-2C2 is an ONT/ONU.
https://hack-gpon.org/ont-huawei-ma5671a/
https://hack-gpon.org/ont-fs-com-gpon-onu-stick-with-mac/
https://hack-gpon.org/ont-odi-realtek-dfp-34x-2c2/
I think the discussion on LAN_SDS_MODE=1 or LAN_SDS_MODE=6, started by
me is not part of the problem as the system after the quirk is working
at 2500-X with both settings. My fault!
The problem for these kind of modules is simply that they are not
showing up at 2500-X because EEPROM or Virtual EEPROM (in case of
MA5671A) failure to provide the correct speed to the linux driver.
Huawei MA5671A and Fiberstone GPON-ONU-34-20BI require:
"sfp_quirk_2500basex" and "sfp_fixup_ignore_tx_fault" quirks
ODI DFP-34X-2C2
only require "sfp_quirk_2500basex"
Hope this may help.
Regards
Sergio Palumbo
Il 08/02/2024 17:28, Russell King (Oracle) ha scritto:
> On Thu, Feb 08, 2024 at 05:19:24PM +0100, Sergio Palumbo wrote:
>> Dear Russell,
>> I understand your point, but I think ODI DFP-34X-2C2 situation is quite
>> similar to:
>> FS GPON-INU-34-20BI
>> HUAWEI MA5671A
> MA5671A is configured by the OLT. The user can't configure it.
>
Powered by blists - more mailing lists