[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1b2d471a5d06ecadcb75e3d9155b6d566afb2767.camel@redhat.com>
Date: Fri, 09 Feb 2024 13:57:25 +0100
From: Paolo Abeni <pabeni@...hat.com>
To: Liang Chen <liangchen.linux@...il.com>
Cc: Jesper Dangaard Brouer <hawk@...nel.org>, mst@...hat.com,
jasowang@...hat.com, xuanzhuo@...ux.alibaba.com, hengqi@...ux.alibaba.com,
davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
netdev@...r.kernel.org, virtualization@...ts.linux.dev,
linux-kernel@...r.kernel.org, bpf@...r.kernel.org,
john.fastabend@...il.com, daniel@...earbox.net, ast@...nel.org
Subject: Re: [PATCH net-next v5] virtio_net: Support RX hash XDP hint
On Fri, 2024-02-09 at 18:39 +0800, Liang Chen wrote:
> On Wed, Feb 7, 2024 at 10:27 PM Paolo Abeni <pabeni@...hat.com> wrote:
> >
> > On Wed, 2024-02-07 at 10:54 +0800, Liang Chen wrote:
> > > On Tue, Feb 6, 2024 at 6:44 PM Paolo Abeni <pabeni@...hat.com> wrote:
> > > >
> > > > On Sat, 2024-02-03 at 10:56 +0800, Liang Chen wrote:
> > > > > On Sat, Feb 3, 2024 at 12:20 AM Jesper Dangaard Brouer <hawk@...nel.org> wrote:
> > > > > > On 02/02/2024 13.11, Liang Chen wrote:
> > > > [...]
> > > > > > > @@ -1033,6 +1039,16 @@ static void put_xdp_frags(struct xdp_buff *xdp)
> > > > > > > }
> > > > > > > }
> > > > > > >
> > > > > > > +static void virtnet_xdp_save_rx_hash(struct virtnet_xdp_buff *virtnet_xdp,
> > > > > > > + struct net_device *dev,
> > > > > > > + struct virtio_net_hdr_v1_hash *hdr_hash)
> > > > > > > +{
> > > > > > > + if (dev->features & NETIF_F_RXHASH) {
> > > > > > > + virtnet_xdp->hash_value = hdr_hash->hash_value;
> > > > > > > + virtnet_xdp->hash_report = hdr_hash->hash_report;
> > > > > > > + }
> > > > > > > +}
> > > > > > > +
> > > > > >
> > > > > > Would it be possible to store a pointer to hdr_hash in virtnet_xdp_buff,
> > > > > > with the purpose of delaying extracting this, until and only if XDP
> > > > > > bpf_prog calls the kfunc?
> > > > > >
> > > > >
> > > > > That seems to be the way v1 works,
> > > > > https://lore.kernel.org/all/20240122102256.261374-1-liangchen.linux@gmail.com/
> > > > > . But it was pointed out that the inline header may be overwritten by
> > > > > the xdp prog, so the hash is copied out to maintain its integrity.
> > > >
> > > > Why? isn't XDP supposed to get write access only to the pkt
> > > > contents/buffer?
> > > >
> > >
> > > Normally, an XDP program accesses only the packet data. However,
> > > there's also an XDP RX Metadata area, referenced by the data_meta
> > > pointer. This pointer can be adjusted with bpf_xdp_adjust_meta to
> > > point somewhere ahead of the data buffer, thereby granting the XDP
> > > program access to the virtio header located immediately before the
> >
> > AFAICS bpf_xdp_adjust_meta() does not allow moving the meta_data before
> > xdp->data_hard_start:
> >
> > https://elixir.bootlin.com/linux/latest/source/net/core/filter.c#L4210
> >
> > and virtio net set such field after the virtio_net_hdr:
> >
> > https://elixir.bootlin.com/linux/latest/source/drivers/net/virtio_net.c#L1218
> > https://elixir.bootlin.com/linux/latest/source/drivers/net/virtio_net.c#L1420
> >
> > I don't see how the virtio hdr could be touched? Possibly even more
> > important: if such thing is possible, I think is should be somewhat
> > denied (for the same reason an H/W nic should prevent XDP from
> > modifying its own buffer descriptor).
>
> Thank you for highlighting this concern. The header layout differs
> slightly between small and mergeable mode. Taking 'mergeable mode' as
> an example, after calling xdp_prepare_buff the layout of xdp_buff
> would be as depicted in the diagram below,
>
> buf
> |
> v
> +--------------+--------------+-------------+
> | xdp headroom | virtio header| packet |
> | (256 bytes) | (20 bytes) | content |
> +--------------+--------------+-------------+
> ^ ^
> | |
> data_hard_start data
> data_meta
>
> If 'bpf_xdp_adjust_meta' repositions the 'data_meta' pointer a little
> towards 'data_hard_start', it would point to the inline header, thus
> potentially allowing the XDP program to access the inline header.
I see. That layout was completely unexpected to me.
AFAICS the virtio_net driver tries to avoid accessing/using the
virtio_net_hdr after the XDP program execution, so nothing tragic
should happen.
@Michael, @Jason, I guess the above is like that by design? Isn't it a
bit fragile?
Thanks!
Paolo
Powered by blists - more mailing lists