netdev - [PATCH net-next v3 0/7] Fix missing PHY-to-MAC RX clock

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240212-rxc_bugfix-v3-0-e9f2eb6b3b05@bootlin.com>
Date: Mon, 12 Feb 2024 17:42:07 +0100
From: Romain Gantois <romain.gantois@...tlin.com>
To: Russell King <linux@...linux.org.uk>, Andrew Lunn <andrew@...n.ch>, 
 Heiner Kallweit <hkallweit1@...il.com>, 
 "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, 
 Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, 
 Alexandre Torgue <alexandre.torgue@...s.st.com>, 
 Jose Abreu <joabreu@...opsys.com>, 
 Maxime Coquelin <mcoquelin.stm32@...il.com>, 
 Clément Léger <clement.leger@...tlin.com>
Cc: Maxime Chevallier <maxime.chevallier@...tlin.com>, 
 Miquel Raynal <miquel.raynal@...tlin.com>, 
 Thomas Petazzoni <thomas.petazzoni@...tlin.com>, netdev@...r.kernel.org, 
 linux-stm32@...md-mailman.stormreply.com, 
 linux-arm-kernel@...ts.infradead.org, linux-renesas-soc@...r.kernel.org, 
 Romain Gantois <romain.gantois@...tlin.com>, 
 Clark Wang <xiaoning.wang@....com>
Subject: [PATCH net-next v3 0/7] Fix missing PHY-to-MAC RX clock

Hello everyone,

This is version three of my series that addresses the issue with some MAC/PHY
combinations.

Notable changes in v3:
  - Removed the "interface" argument from pcs_init().
  - Added a kernel doc for pcs_init().

Notable changes in v2:
  - Introduced a pcs op for initializing hardware required for MAC
    initialization, instead of using phylink_validate() for this purpose.
  - Refactored stmmac to use a generic PCS reference in mac_device_info
    instead of a model-specific field.

There is an issue with some stmmac/PHY combinations that has been reported
some time ago in a couple of different series:

Clark Wang's report:
https://lore.kernel.org/all/20230202081559.3553637-1-xiaoning.wang@nxp.com/
Clément Léger's report:
https://lore.kernel.org/linux-arm-kernel/20230116103926.276869-4-clement.leger@bootlin.com/

Stmmac controllers require an RX clock signal from the MII bus to perform
their hardware initialization successfully. This causes issues with some
PHY/PCS devices. If these devices do not bring the clock signal up before
the MAC driver initializes its hardware, then said initialization will
fail. This can happen at probe time or when the system wakes up from a
suspended state.

This series introduces new flags for phy_device and phylink_pcs. These
flags allow MAC drivers to signal to PHY/PCS drivers that the RX clock
signal should be enabled as soon as possible, and that it should always
stay enabled.

I have included specific uses of these flags that fix the RZN1 GMAC1 stmmac
driver that I am currently working on and that is not yet upstream. I have
also included changes to the at803x PHY driver that should fix the issue
that Clark Wang was having.

Clark, could you please confirm that this series fixes your issue with the
at803x PHY?

Best Regards,

Romain

Romain Gantois (2):
  net: phy: add rxc_always_on flag to phylink_pcs
  net: pcs: rzn1-miic: Init RX clock early if MAC requires it

Russell King (3):
  net: phy: add PHY_F_RXC_ALWAYS_ON to PHY dev flags
  net: stmmac: Signal to PHY/PCS drivers to keep RX clock on
  net: phy: at803x: Avoid hibernating if MAC requires RX clock

 .../net/ethernet/stmicro/stmmac/stmmac_main.c  |  5 +++++
 drivers/net/pcs/pcs-rzn1-miic.c                | 18 +++++++++++++-----
 drivers/net/phy/at803x.c                       |  3 ++-
 drivers/net/phy/phylink.c                      | 13 ++++++++++++-
 include/linux/phy.h                            |  1 +
 include/linux/phylink.h                        |  9 +++++++++
 6 files changed, 42 insertions(+), 7 deletions(-)

--
2.43.0

---
- Link to v2: https://lore.kernel.org/r/20240130-rxc_bugfix-v2-0-5e6c3168e5f0@bootlin.com

---
Maxime Chevallier (1):
      net: stmmac: don't rely on lynx_pcs presence to check for a PHY

Romain Gantois (4):
      net: phylink: add rxc_always_on flag to phylink_pcs
      net: stmmac: Support a generic PCS field in mac_device_info
      net: stmmac: Signal to PHY/PCS drivers to keep RX clock on
      net: pcs: rzn1-miic: Init RX clock early if MAC requires it

Russell King (2):
      net: phylink: add PHY_F_RXC_ALWAYS_ON to PHY dev flags
      net: phy: qcom: at803x: Avoid hibernating if MAC requires RX clock

 drivers/net/ethernet/stmicro/stmmac/common.h       |  2 +-
 .../net/ethernet/stmicro/stmmac/dwmac-socfpga.c    |  8 ++---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  | 15 ++++----
 drivers/net/pcs/pcs-rzn1-miic.c                    | 27 ++++++++++++++
 drivers/net/phy/phylink.c                          | 24 ++++++++++++-
 drivers/net/phy/qcom/at803x.c                      |  3 +-
 include/linux/phy.h                                |  1 +
 include/linux/phylink.h                            | 42 ++++++++++++++++++++++
 8 files changed, 109 insertions(+), 13 deletions(-)
---
base-commit: 0f37666d87d2dea42ec21776c3d562b7cbd71612
change-id: 20240126-rxc_bugfix-d47b3b1a374f

Best regards,
-- 
Romain Gantois <romain.gantois@...tlin.com>