| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Zcs95HiZz5g4QUwt@mev-dev>
Date: Tue, 13 Feb 2024 11:01:08 +0100
From: Michal Swiatkowski <michal.swiatkowski@...ux.intel.com>
To: Jiri Pirko <jiri@...nulli.us>
Cc: intel-wired-lan@...ts.osuosl.org, netdev@...r.kernel.org,
pawel.chmielewski@...el.com, sridhar.samudrala@...el.com,
jacob.e.keller@...el.com, pio.raczynski@...il.com,
konrad.knitter@...el.com, marcin.szycik@...el.com,
wojciech.drewek@...el.com, nex.sw.ncis.nat.hpm.dev@...el.com,
przemyslaw.kitszel@...el.com
Subject: Re: [iwl-next v1 1/7] ice: devlink PF MSI-X max and min parameter
On Tue, Feb 13, 2024 at 10:03:05AM +0100, Jiri Pirko wrote:
> Tue, Feb 13, 2024 at 08:35:03AM CET, michal.swiatkowski@...ux.intel.com wrote:
> >Use generic devlink PF MSI-X parameter to allow user to change MSI-X
> >range.
> >
> >Reviewed-by: Wojciech Drewek <wojciech.drewek@...el.com>
> >Signed-off-by: Michal Swiatkowski <michal.swiatkowski@...ux.intel.com>
> >---
> > drivers/net/ethernet/intel/ice/ice.h | 8 ++
> > drivers/net/ethernet/intel/ice/ice_devlink.c | 82 ++++++++++++++++++++
> > drivers/net/ethernet/intel/ice/ice_irq.c | 6 ++
> > 3 files changed, 96 insertions(+)
> >
> >diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
> >index c4127d5f2be3..24085f3c0966 100644
> >--- a/drivers/net/ethernet/intel/ice/ice.h
> >+++ b/drivers/net/ethernet/intel/ice/ice.h
> >@@ -94,6 +94,7 @@
> > #define ICE_MIN_LAN_TXRX_MSIX 1
> > #define ICE_MIN_LAN_OICR_MSIX 1
> > #define ICE_MIN_MSIX (ICE_MIN_LAN_TXRX_MSIX + ICE_MIN_LAN_OICR_MSIX)
> >+#define ICE_MAX_MSIX 256
> > #define ICE_FDIR_MSIX 2
> > #define ICE_RDMA_NUM_AEQ_MSIX 4
> > #define ICE_MIN_RDMA_MSIX 2
> >@@ -535,6 +536,12 @@ struct ice_agg_node {
> > u8 valid;
> > };
> >
> >+struct ice_pf_msix {
> >+ u16 cur;
> >+ u16 min;
> >+ u16 max;
> >+};
> >+
> > struct ice_pf {
> > struct pci_dev *pdev;
> >
> >@@ -604,6 +611,7 @@ struct ice_pf {
> > struct msi_map ll_ts_irq; /* LL_TS interrupt MSIX vector */
> > u16 max_pf_txqs; /* Total Tx queues PF wide */
> > u16 max_pf_rxqs; /* Total Rx queues PF wide */
> >+ struct ice_pf_msix msix;
> > u16 num_lan_msix; /* Total MSIX vectors for base driver */
> > u16 num_lan_tx; /* num LAN Tx queues setup */
> > u16 num_lan_rx; /* num LAN Rx queues setup */
> >diff --git a/drivers/net/ethernet/intel/ice/ice_devlink.c b/drivers/net/ethernet/intel/ice/ice_devlink.c
> >index cc717175178b..b82ff9556a4b 100644
> >--- a/drivers/net/ethernet/intel/ice/ice_devlink.c
> >+++ b/drivers/net/ethernet/intel/ice/ice_devlink.c
> >@@ -1603,6 +1603,78 @@ enum ice_param_id {
> > ICE_DEVLINK_PARAM_ID_LOOPBACK,
> > };
> >
> >+static int
> >+ice_devlink_msix_max_pf_get(struct devlink *devlink, u32 id,
> >+ struct devlink_param_gset_ctx *ctx)
> >+{
> >+ struct ice_pf *pf = devlink_priv(devlink);
> >+
> >+ ctx->val.vu16 = pf->msix.max;
> >+
> >+ return 0;
> >+}
> >+
> >+static int
> >+ice_devlink_msix_max_pf_set(struct devlink *devlink, u32 id,
> >+ struct devlink_param_gset_ctx *ctx)
> >+{
> >+ struct ice_pf *pf = devlink_priv(devlink);
> >+ u16 max = ctx->val.vu16;
> >+
> >+ pf->msix.max = max;
>
> What's permanent about this exactly?
>
I want to store the value here after driver reinit. Isn't it enough to
use this parameter type? Which one should be used for this purpose?
>
> >+
> >+ return 0;
> >+}
> >+
> >+static int
> >+ice_devlink_msix_max_pf_validate(struct devlink *devlink, u32 id,
> >+ union devlink_param_value val,
> >+ struct netlink_ext_ack *extack)
> >+{
> >+ if (val.vu16 > ICE_MAX_MSIX) {
> >+ NL_SET_ERR_MSG_MOD(extack, "PF max MSI-X is too high");
> >+ return -EINVAL;
> >+ }
> >+
> >+ return 0;
> >+}
> >+
> >+static int
> >+ice_devlink_msix_min_pf_get(struct devlink *devlink, u32 id,
> >+ struct devlink_param_gset_ctx *ctx)
> >+{
> >+ struct ice_pf *pf = devlink_priv(devlink);
> >+
> >+ ctx->val.vu16 = pf->msix.min;
> >+
> >+ return 0;
> >+}
> >+
> >+static int
> >+ice_devlink_msix_min_pf_set(struct devlink *devlink, u32 id,
> >+ struct devlink_param_gset_ctx *ctx)
> >+{
> >+ struct ice_pf *pf = devlink_priv(devlink);
> >+ u16 min = ctx->val.vu16;
> >+
> >+ pf->msix.min = min;
>
> What's permanent about this exactly?
>
The same as with max.
>
> >+
> >+ return 0;
> >+}
> >+
> >+static int
> >+ice_devlink_msix_min_pf_validate(struct devlink *devlink, u32 id,
> >+ union devlink_param_value val,
> >+ struct netlink_ext_ack *extack)
> >+{
> >+ if (val.vu16 <= ICE_MIN_MSIX) {
> >+ NL_SET_ERR_MSG_MOD(extack, "PF min MSI-X is too low");
> >+ return -EINVAL;
> >+ }
> >+
> >+ return 0;
> >+}
> >+
> > static const struct devlink_param ice_devlink_params[] = {
> > DEVLINK_PARAM_GENERIC(ENABLE_ROCE, BIT(DEVLINK_PARAM_CMODE_RUNTIME),
> > ice_devlink_enable_roce_get,
> >@@ -1618,6 +1690,16 @@ static const struct devlink_param ice_devlink_params[] = {
> > ice_devlink_loopback_get,
> > ice_devlink_loopback_set,
> > ice_devlink_loopback_validate),
> >+ DEVLINK_PARAM_GENERIC(MSIX_VEC_PER_PF_MAX,
> >+ BIT(DEVLINK_PARAM_CMODE_PERMANENT),
> >+ ice_devlink_msix_max_pf_get,
> >+ ice_devlink_msix_max_pf_set,
> >+ ice_devlink_msix_max_pf_validate),
> >+ DEVLINK_PARAM_GENERIC(MSIX_VEC_PER_PF_MIN,
> >+ BIT(DEVLINK_PARAM_CMODE_PERMANENT),
>
> ....
>
>
> pw-bot: cr
>
>
> >+ ice_devlink_msix_min_pf_get,
> >+ ice_devlink_msix_min_pf_set,
> >+ ice_devlink_msix_min_pf_validate),
> > };
> >
> > static void ice_devlink_free(void *devlink_ptr)
> >diff --git a/drivers/net/ethernet/intel/ice/ice_irq.c b/drivers/net/ethernet/intel/ice/ice_irq.c
> >index ad82ff7d1995..fa7178a68b94 100644
> >--- a/drivers/net/ethernet/intel/ice/ice_irq.c
> >+++ b/drivers/net/ethernet/intel/ice/ice_irq.c
> >@@ -254,6 +254,12 @@ int ice_init_interrupt_scheme(struct ice_pf *pf)
> > int total_vectors = pf->hw.func_caps.common_cap.num_msix_vectors;
> > int vectors, max_vectors;
> >
> >+ /* load default PF MSI-X range */
> >+ if (!pf->msix.min)
> >+ pf->msix.min = ICE_MIN_MSIX;
> >+ if (!pf->msix.max)
> >+ pf->msix.max = total_vectors / 2;
> >+
> > vectors = ice_ena_msix_range(pf);
> >
> > if (vectors < 0)
> >--
> >2.42.0
> >
> >
Powered by blists - more mailing lists