[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20240213-reactor-vertebrae-af419800fcdc-mkl@pengutronix.de>
Date: Tue, 13 Feb 2024 12:00:24 +0100
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: Srinivas Goud <srinivas.goud@....com>
Cc: wg@...ndegger.com, davem@...emloft.net, edumazet@...gle.com,
kuba@...nel.org, pabeni@...hat.com, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org, p.zabel@...gutronix.de, git@....com,
michal.simek@...inx.com, linux-can@...r.kernel.org, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH RESEND v7 0/3] can: xilinx_can: Add ECC feature support
On 13.02.2024 11:22:49, Marc Kleine-Budde wrote:
> On 12.01.2024 17:07:30, Srinivas Goud wrote:
> > Add ECC feature support to Tx and Rx FIFOs for Xilinx CAN Controller.
> > ECC is an IP configuration option where counter registers are added in
> > IP for 1bit/2bit ECC errors count and reset.
> > Also driver reports 1bit/2bit ECC errors for FIFOs based on ECC error
> > interrupts.
> >
> > Add xlnx,has-ecc optional property for Xilinx AXI CAN controller
> > to support ECC if the ECC block is enabled in the HW.
> >
> > Add ethtool stats interface for getting all the ECC errors information.
> >
> > There is no public documentation for it available.
>
> Lately I was using ethtool based stats, too and figured out, there's no
> need for a spinlock, you can use a struct u64_stats_sync,
> u64_stats_update_begin(), u64_stats_update_end(), and
> u64_stats_fetch_retry() instead. These are no-ops on 64 bit systems and
> sequential locks on 32 bit systems.
>
> I'll send a v8.
https://lore.kernel.org/all/20240213-xilinx_ecc-v8-0-8d75f8b80771@pengutronix.de/
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung Nürnberg | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists