| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id:
<20240216-for-netnext-mt7530-improvements-3-v2-4-094cae3ff23b@arinc9.com>
Date: Fri, 16 Feb 2024 14:05:32 +0300
From: Arınç ÜNAL via B4 Relay
<devnull+arinc.unal.arinc9.com@...nel.org>
To: Daniel Golle <daniel@...rotopia.org>, DENG Qingfang <dqfext@...il.com>,
Sean Wang <sean.wang@...iatek.com>, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
Russell King <linux@...linux.org.uk>
Cc: mithat.guner@...ont.com, erkin.bozoglu@...ont.com,
Bartel Eerdekens <bartel.eerdekens@...stell8.be>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
Arınç ÜNAL <arinc.unal@...nc9.com>
Subject: [PATCH net-next v2 4/8] net: dsa: mt7530: get rid of useless error
returns on phylink code path
From: Arınç ÜNAL <arinc.unal@...nc9.com>
Remove error returns on the cases where they are already handled with the
function the mac_port_get_caps member in mt753x_table points to.
mt7531_mac_config() is also called from mt7531_cpu_port_config() outside of
phylink but the port and interface modes are already handled there.
Change the functions and the mac_port_config function pointer to void now
that there're no error returns anymore.
Remove mt753x_is_mac_port() that used to help the said error returns.
On mt7531_mac_config(), switch to if statements to simplify the code.
Remove internal phy cases from mt753x_phylink_mac_config(), there is no
need to check the interface mode as that's already handled with the
function the mac_port_get_caps member in mt753x_table points to.
Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
Acked-by: Daniel Golle <daniel@...rotopia.org>
Tested-by: Daniel Golle <daniel@...rotopia.org>
Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
---
drivers/net/dsa/mt7530.c | 81 ++++++++++--------------------------------------
drivers/net/dsa/mt7530.h | 6 ++--
2 files changed, 19 insertions(+), 68 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 296711fd5c43..c069bf273733 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2587,7 +2587,7 @@ static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port,
}
}
-static int
+static void
mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
phy_interface_t interface)
{
@@ -2597,22 +2597,14 @@ mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
mt7530_setup_port5(priv->ds, interface);
else if (port == 6)
mt7530_setup_port6(priv->ds, interface);
-
- return 0;
}
-static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
- phy_interface_t interface,
- struct phy_device *phydev)
+static void mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
+ phy_interface_t interface,
+ struct phy_device *phydev)
{
u32 val;
- if (priv->p5_sgmii) {
- dev_err(priv->dev, "RGMII mode is not available for port %d\n",
- port);
- return -EINVAL;
- }
-
val = mt7530_read(priv, MT7531_CLKGEN_CTRL);
val |= GP_CLK_EN;
val &= ~GP_MODE_MASK;
@@ -2640,20 +2632,14 @@ static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
case PHY_INTERFACE_MODE_RGMII_ID:
break;
default:
- return -EINVAL;
+ break;
}
}
- mt7530_write(priv, MT7531_CLKGEN_CTRL, val);
-
- return 0;
-}
-static bool mt753x_is_mac_port(u32 port)
-{
- return (port == 5 || port == 6);
+ mt7530_write(priv, MT7531_CLKGEN_CTRL, val);
}
-static int
+static void
mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
phy_interface_t interface)
{
@@ -2661,42 +2647,21 @@ mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
struct phy_device *phydev;
struct dsa_port *dp;
- if (!mt753x_is_mac_port(port)) {
- dev_err(priv->dev, "port %d is not a MAC port\n", port);
- return -EINVAL;
- }
-
- switch (interface) {
- case PHY_INTERFACE_MODE_RGMII:
- case PHY_INTERFACE_MODE_RGMII_ID:
- case PHY_INTERFACE_MODE_RGMII_RXID:
- case PHY_INTERFACE_MODE_RGMII_TXID:
+ if (phy_interface_mode_is_rgmii(interface)) {
dp = dsa_to_port(ds, port);
phydev = dp->user->phydev;
- return mt7531_rgmii_setup(priv, port, interface, phydev);
- case PHY_INTERFACE_MODE_SGMII:
- case PHY_INTERFACE_MODE_NA:
- case PHY_INTERFACE_MODE_1000BASEX:
- case PHY_INTERFACE_MODE_2500BASEX:
- /* handled in SGMII PCS driver */
- return 0;
- default:
- return -EINVAL;
+ mt7531_rgmii_setup(priv, port, interface, phydev);
}
-
- return -EINVAL;
}
-static int
+static void
mt753x_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
const struct phylink_link_state *state)
{
struct mt7530_priv *priv = ds->priv;
- if (!priv->info->mac_port_config)
- return 0;
-
- return priv->info->mac_port_config(ds, port, mode, state->interface);
+ if (priv->info->mac_port_config)
+ priv->info->mac_port_config(ds, port, mode, state->interface);
}
static struct phylink_pcs *
@@ -2725,17 +2690,11 @@ mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
u32 mcr_cur, mcr_new;
switch (port) {
- case 0 ... 4:
- if (state->interface != PHY_INTERFACE_MODE_GMII &&
- state->interface != PHY_INTERFACE_MODE_INTERNAL)
- goto unsupported;
- break;
case 5:
if (priv->p5_interface == state->interface)
break;
- if (mt753x_mac_config(ds, port, mode, state) < 0)
- goto unsupported;
+ mt753x_mac_config(ds, port, mode, state);
if (priv->p5_intf_sel != P5_DISABLED)
priv->p5_interface = state->interface;
@@ -2744,16 +2703,10 @@ mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
if (priv->p6_interface == state->interface)
break;
- if (mt753x_mac_config(ds, port, mode, state) < 0)
- goto unsupported;
+ mt753x_mac_config(ds, port, mode, state);
priv->p6_interface = state->interface;
break;
- default:
-unsupported:
- dev_err(ds->dev, "%s: unsupported %s port: %i\n",
- __func__, phy_modes(state->interface), port);
- return;
}
mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
@@ -2836,7 +2789,6 @@ mt7531_cpu_port_config(struct dsa_switch *ds, int port)
struct mt7530_priv *priv = ds->priv;
phy_interface_t interface;
int speed;
- int ret;
switch (port) {
case 5:
@@ -2861,9 +2813,8 @@ mt7531_cpu_port_config(struct dsa_switch *ds, int port)
else
speed = SPEED_1000;
- ret = mt7531_mac_config(ds, port, MLO_AN_FIXED, interface);
- if (ret)
- return ret;
+ mt7531_mac_config(ds, port, MLO_AN_FIXED, interface);
+
mt7530_write(priv, MT7530_PMCR_P(port),
PMCR_CPU_PORT_SETTING(priv->id));
mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL,
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 26a6d2160c08..b1665de7f640 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -730,9 +730,9 @@ struct mt753x_info {
void (*mac_port_validate)(struct dsa_switch *ds, int port,
phy_interface_t interface,
unsigned long *supported);
- int (*mac_port_config)(struct dsa_switch *ds, int port,
- unsigned int mode,
- phy_interface_t interface);
+ void (*mac_port_config)(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface);
};
/* struct mt7530_priv - This is the main data structure for holding the state
--
2.40.1
Powered by blists - more mailing lists