netdev - [PATCH v7 net-next 14/14] net: phy: marvell-88q2xxx: move interrupt configuration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240218075753.18067-15-dima.fedrau@gmail.com>
Date: Sun, 18 Feb 2024 08:57:51 +0100
From: Dimitri Fedrau <dima.fedrau@...il.com>
To: 
Cc: Dimitri Fedrau <dima.fedrau@...il.com>,
	Andrew Lunn <andrew@...n.ch>,
	Stefan Eichenberger <eichest@...il.com>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH v7 net-next 14/14] net: phy: marvell-88q2xxx: move interrupt configuration

Move interrupt configuration from mv88q222x_revb0_config_init to
mv88q2xxx_config_init. Same register and bits are used for the 88q2xxx
devices.

Reviewed-by: Andrew Lunn <andrew@...n.ch>
Reviewed-by: Stefan Eichenberger <eichest@...il.com>
Signed-off-by: Dimitri Fedrau <dima.fedrau@...il.com>
---
 drivers/net/phy/marvell-88q2xxx.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/phy/marvell-88q2xxx.c b/drivers/net/phy/marvell-88q2xxx.c
index 75740f378c66..6b4bd9883304 100644
--- a/drivers/net/phy/marvell-88q2xxx.c
+++ b/drivers/net/phy/marvell-88q2xxx.c
@@ -376,6 +376,14 @@ static int mv88q2xxx_config_init(struct phy_device *phydev)
 	 */
 	phydev->pma_extable = MDIO_PMA_EXTABLE_BT1;
 
+	/* Configure interrupt with default settings, output is driven low for
+	 * active interrupt and high for inactive.
+	 */
+	if (phy_interrupt_is_valid(phydev))
+		return phy_set_bits_mmd(phydev, MDIO_MMD_PCS,
+					MDIO_MMD_PCS_MV_GPIO_INT_CTRL,
+					MDIO_MMD_PCS_MV_GPIO_INT_CTRL_TRI_DIS);
+
 	return 0;
 }
 
@@ -701,14 +709,6 @@ static int mv88q222x_revb0_config_init(struct phy_device *phydev)
 			return ret;
 	}
 
-	/* Configure interrupt with default settings, output is driven low for
-	 * active interrupt and high for inactive.
-	 */
-	if (phy_interrupt_is_valid(phydev))
-		return phy_set_bits_mmd(phydev, MDIO_MMD_PCS,
-					MDIO_MMD_PCS_MV_GPIO_INT_CTRL,
-					MDIO_MMD_PCS_MV_GPIO_INT_CTRL_TRI_DIS);
-
 	return mv88q2xxx_config_init(phydev);
 }
 
-- 
2.39.2