netdev - [PATCH net-next] net: stmmac: dwmac-qcom-ethqos: Update link clock rate only for RGMII

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240222125517.3356-1-quic_sarohasa@quicinc.com>
Date: Thu, 22 Feb 2024 18:25:17 +0530
From: Sarosh Hasan <quic_sarohasa@...cinc.com>
To: Vinod Koul <vkoul@...nel.org>, Bhupesh Sharma <bhupesh.sharma@...aro.org>,
        Andy Gross <agross@...nel.org>, Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        "David S. Miller"
	<davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski
	<kuba@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski
	<krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>,
        Jose Abreu
	<joabreu@...opsys.com>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>, <netdev@...r.kernel.org>,
        <linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        Prasad Sodagudi
	<psodagud@...cinc.com>,
        Andrew Halaney <ahalaney@...hat.com>, Rob Herring
	<robh@...nel.org>
CC: <kernel@...cinc.com>, Sneh Shah <quic_snehshah@...cinc.com>,
        Suraj Jaiswal
	<quic_jsuraj@...cinc.com>
Subject: [PATCH net-next] net: stmmac: dwmac-qcom-ethqos: Update link clock rate only for RGMII

Updating link clock rate for different speeds is only needed when
using RGMII, as that mode requires changing clock speed when the link
speed changes. Let's restrict updating the link clock speed in
ethqos_update_link_clk() to just RGMII. Other modes such as SGMII
only need to enable the link clock (which is already done in probe).

Signed-off-by: Sarosh Hasan <quic_sarohasa@...cinc.com>
---
 .../stmicro/stmmac/dwmac-qcom-ethqos.c        | 26 ++++++++++---------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 31631e3f89d0..9cd144fb3005 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -169,21 +169,23 @@ static void rgmii_dump(void *priv)
 static void
 ethqos_update_link_clk(struct qcom_ethqos *ethqos, unsigned int speed)
 {
-	switch (speed) {
-	case SPEED_1000:
-		ethqos->link_clk_rate =  RGMII_1000_NOM_CLK_FREQ;
-		break;
+	if (phy_interface_mode_is_rgmii(ethqos->phy_mode)) {
+		switch (speed) {
+		case SPEED_1000:
+			ethqos->link_clk_rate =  RGMII_1000_NOM_CLK_FREQ;
+			break;
 
-	case SPEED_100:
-		ethqos->link_clk_rate =  RGMII_ID_MODE_100_LOW_SVS_CLK_FREQ;
-		break;
+		case SPEED_100:
+			ethqos->link_clk_rate =  RGMII_ID_MODE_100_LOW_SVS_CLK_FREQ;
+			break;
 
-	case SPEED_10:
-		ethqos->link_clk_rate =  RGMII_ID_MODE_10_LOW_SVS_CLK_FREQ;
-		break;
-	}
+		case SPEED_10:
+			ethqos->link_clk_rate =  RGMII_ID_MODE_10_LOW_SVS_CLK_FREQ;
+			break;
+		}
 
-	clk_set_rate(ethqos->link_clk, ethqos->link_clk_rate);
+		clk_set_rate(ethqos->link_clk, ethqos->link_clk_rate);
+	}
 }
 
 static void ethqos_set_func_clk_en(struct qcom_ethqos *ethqos)
-- 
2.17.1