netdev - [net-next v2] net: ethernet: adi: adin1110: Reduce the MDIO

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240223162129.154114-1-ciprian.regus@analog.com>
Date: Fri, 23 Feb 2024 18:21:27 +0200
From: Ciprian Regus <ciprian.regus@...log.com>
To: <linux-kernel@...r.kernel.org>
CC: Ciprian Regus <ciprian.regus@...log.com>, Nuno Sa <nuno.sa@...log.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>, "Simon
 Horman" <horms@...nel.org>,
        Michal Simek <michal.simek@....com>, Mark Brown
	<broonie@...nel.org>,
        Yang Yingliang <yangyingliang@...wei.com>,
        "Amit Kumar
 Mahapatra" <amit.kumar-mahapatra@....com>,
        Dell Jin
	<dell.jin.code@...look.com>, <netdev@...r.kernel.org>
Subject: [net-next v2] net: ethernet: adi: adin1110: Reduce the MDIO_TRDONE poll interval

In order to do a clause 22 access to the PHY registers of the ADIN1110,
we have to write the MDIO frame to the ADIN1110_MDIOACC register, and
then poll the MDIO_TRDONE bit (for a 1) in the same register. The
device will set this bit to 1 once the internal MDIO transaction is
done. In practice, this bit takes ~50 - 60 us to be set.

The first attempt to poll the bit is right after the ADIN1110_MDIOACC
register is written, so it will always be read as 0. The next check will
only be done after 10 ms, which will result in the MDIO transactions
taking a long time to complete. Reduce this polling interval to 100 us.
Since this interval is short enough, switch the poll function to
readx_poll_timeout_atomic() instead.

Reviewed-by: Nuno Sa <nuno.sa@...log.com>
Signed-off-by: Ciprian Regus <ciprian.regus@...log.com>
---
Changelog v1 -> v2:
- switch readx_poll_timeout() to readx_poll_timeout_atomic()

 drivers/net/ethernet/adi/adin1110.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/adi/adin1110.c b/drivers/net/ethernet/adi/adin1110.c
index d7c274af6d4d..8b4ef5121308 100644
--- a/drivers/net/ethernet/adi/adin1110.c
+++ b/drivers/net/ethernet/adi/adin1110.c
@@ -466,4 +466,5 @@ static int adin1110_mdio_read(struct mii_bus *bus, int phy_id, int reg)
 	 */
-	ret = readx_poll_timeout(adin1110_read_mdio_acc, priv, val,
-				 (val & ADIN1110_MDIO_TRDONE), 10000, 30000);
+	ret = readx_poll_timeout_atomic(adin1110_read_mdio_acc, priv, val,
+					(val & ADIN1110_MDIO_TRDONE),
+					100, 30000);
 	if (ret < 0)
@@ -497,4 +498,5 @@ static int adin1110_mdio_write(struct mii_bus *bus, int phy_id,
 
-	return readx_poll_timeout(adin1110_read_mdio_acc, priv, val,
-				  (val & ADIN1110_MDIO_TRDONE), 10000, 30000);
+	return readx_poll_timeout_atomic(adin1110_read_mdio_acc, priv, val,
+					 (val & ADIN1110_MDIO_TRDONE),
+					 100, 30000);
 }
-- 
2.39.2