[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240227093945.21525-5-bastien.curutchet@bootlin.com>
Date: Tue, 27 Feb 2024 10:39:43 +0100
From: Bastien Curutchet <bastien.curutchet@...tlin.com>
To: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Pavel Machek <pavel@....cz>,
Lee Jones <lee@...nel.org>,
Richard Cochran <richardcochran@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Bastien Curutchet <bastien.curutchet@...tlin.com>
Cc: linux-kernel@...r.kernel.org,
netdev@...r.kernel.org,
devicetree@...r.kernel.org,
linux-leds@...r.kernel.org,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
herve.codina@...tlin.com,
maxime.chevallier@...tlin.com,
christophercordahi@...ometrics.ca
Subject: [PATCH v2 4/6] net: phy: DP83640: Add EDPD management
The driver does not support enabling/disabling Energy Detect Power Down
(EDPD).
The PHY itself support EDPD.
Add missing part in the driver in order to have this support based on
ethtool {set,get}_phy_tunable functions.
Signed-off-by: Bastien Curutchet <bastien.curutchet@...tlin.com>
---
drivers/net/phy/dp83640.c | 62 +++++++++++++++++++++++++++++++++++
drivers/net/phy/dp83640_reg.h | 4 +++
2 files changed, 66 insertions(+)
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index c46c81ef0ad0..16c9fda50b19 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -1531,6 +1531,66 @@ static void dp83640_remove(struct phy_device *phydev)
kfree(dp83640);
}
+static int dp83640_get_edpd(struct phy_device *phydev, u16 *edpd)
+{
+ int val;
+
+ phy_write(phydev, PAGESEL, 0);
+ val = phy_read(phydev, EDCR);
+ if (val & ED_EN)
+ *edpd = 2000; /* 2 seconds */
+ else
+ *edpd = ETHTOOL_PHY_EDPD_DISABLE;
+
+ return 0;
+}
+
+static int dp83640_set_edpd(struct phy_device *phydev, u16 edpd)
+{
+ int val;
+
+ phy_write(phydev, PAGESEL, 0);
+ val = phy_read(phydev, EDCR);
+
+ switch (edpd) {
+ case ETHTOOL_PHY_EDPD_DFLT_TX_MSECS:
+ case 2000: /* 2 seconds */
+ val |= ED_EN;
+ break;
+ case ETHTOOL_PHY_EDPD_DISABLE:
+ val &= ~ED_EN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ phy_write(phydev, EDCR, val);
+
+ return 0;
+}
+
+static int dp83640_get_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna, void *data)
+{
+ switch (tuna->id) {
+ case ETHTOOL_PHY_EDPD:
+ return dp83640_get_edpd(phydev, data);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int dp83640_set_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna, const void *data)
+{
+ switch (tuna->id) {
+ case ETHTOOL_PHY_EDPD:
+ return dp83640_set_edpd(phydev, *(u16 *)data);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
static int dp83640_led_brightness_set(struct phy_device *phydev, u8 index,
enum led_brightness brightness)
{
@@ -1692,6 +1752,8 @@ static struct phy_driver dp83640_driver = {
.name = "NatSemi DP83640",
/* PHY_BASIC_FEATURES */
.probe = dp83640_probe,
+ .get_tunable = dp83640_get_tunable,
+ .set_tunable = dp83640_set_tunable,
.remove = dp83640_remove,
.soft_reset = dp83640_soft_reset,
.config_init = dp83640_config_init,
diff --git a/drivers/net/phy/dp83640_reg.h b/drivers/net/phy/dp83640_reg.h
index 09dd2d2527c7..bf34d422d91e 100644
--- a/drivers/net/phy/dp83640_reg.h
+++ b/drivers/net/phy/dp83640_reg.h
@@ -9,6 +9,7 @@
#define LEDCR 0x0018 /* PHY Control Register */
#define PHYCR 0x0019 /* PHY Control Register */
#define PHYCR2 0x001c /* PHY Control Register 2 */
+#define EDCR 0x001D /* Energy Detect Control Register */
#define PAGE4 0x0004
#define PTP_CTL 0x0014 /* PTP Control Register */
@@ -64,6 +65,9 @@
/* Bit definitions for the PHYCR2 register */
#define BC_WRITE (1<<11) /* Broadcast Write Enable */
+/* Bit definitions for the EDCR register */
+#define ED_EN BIT(15) /* Enable Energy Detect Mode */
+
/* Bit definitions for the PTP_CTL register */
#define TRIG_SEL_SHIFT (10) /* PTP Trigger Select */
#define TRIG_SEL_MASK (0x7)
--
2.43.0
Powered by blists - more mailing lists