[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240227093945.21525-6-bastien.curutchet@bootlin.com>
Date: Tue, 27 Feb 2024 10:39:44 +0100
From: Bastien Curutchet <bastien.curutchet@...tlin.com>
To: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Pavel Machek <pavel@....cz>,
Lee Jones <lee@...nel.org>,
Richard Cochran <richardcochran@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Bastien Curutchet <bastien.curutchet@...tlin.com>
Cc: linux-kernel@...r.kernel.org,
netdev@...r.kernel.org,
devicetree@...r.kernel.org,
linux-leds@...r.kernel.org,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
herve.codina@...tlin.com,
maxime.chevallier@...tlin.com,
christophercordahi@...ometrics.ca
Subject: [PATCH v2 5/6] net: phy: DP83640: Explicitly disabling PHY Control Frames
The PHY offers a PHY control frame feature that allows to access PHY
registers through the MAC transmit data interface. This functionality
is not handled by the driver but can be enabled via hardware strap or
register access.
Disable the feature in config_init() to save some latency on MII packets.
Signed-off-by: Bastien Curutchet <bastien.curutchet@...tlin.com>
---
drivers/net/phy/dp83640.c | 6 ++++++
drivers/net/phy/dp83640_reg.h | 4 ++++
2 files changed, 10 insertions(+)
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 16c9fda50b19..b371dea23937 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -1120,6 +1120,7 @@ static int dp83640_config_init(struct phy_device *phydev)
{
struct dp83640_private *dp83640 = phydev->priv;
struct dp83640_clock *clock = dp83640->clock;
+ int val;
if (clock->chosen && !list_empty(&clock->phylist))
recalibrate(clock);
@@ -1135,6 +1136,11 @@ static int dp83640_config_init(struct phy_device *phydev)
ext_write(0, phydev, PAGE4, PTP_CTL, PTP_ENABLE);
mutex_unlock(&clock->extreg_lock);
+ /* Disable unused PHY control frames */
+ phy_write(phydev, PAGESEL, 0);
+ val = phy_read(phydev, PCFCR) & ~PCF_EN;
+ phy_write(phydev, PCFCR, val);
+
return 0;
}
diff --git a/drivers/net/phy/dp83640_reg.h b/drivers/net/phy/dp83640_reg.h
index bf34d422d91e..b5adb8958c08 100644
--- a/drivers/net/phy/dp83640_reg.h
+++ b/drivers/net/phy/dp83640_reg.h
@@ -10,6 +10,7 @@
#define PHYCR 0x0019 /* PHY Control Register */
#define PHYCR2 0x001c /* PHY Control Register 2 */
#define EDCR 0x001D /* Energy Detect Control Register */
+#define PCFCR 0x001F /* PHY Control Frames Control Register */
#define PAGE4 0x0004
#define PTP_CTL 0x0014 /* PTP Control Register */
@@ -68,6 +69,9 @@
/* Bit definitions for the EDCR register */
#define ED_EN BIT(15) /* Enable Energy Detect Mode */
+/* Bit definitions for the PCFCR register */
+#define PCF_EN BIT(0) /* Enable PHY Control Frames */
+
/* Bit definitions for the PTP_CTL register */
#define TRIG_SEL_SHIFT (10) /* PTP Trigger Select */
#define TRIG_SEL_MASK (0x7)
--
2.43.0
Powered by blists - more mailing lists