| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAJZ5v0j1vzUuNNVihQghiN_ZbEWwxZh9u+Jf1EpBwLJpXry7nA@mail.gmail.com>
Date: Tue, 27 Feb 2024 12:21:25 +0100
From: "Rafael J. Wysocki" <rafael@...nel.org>
To: Linux PM <linux-pm@...r.kernel.org>, Daniel Lezcano <daniel.lezcano@...aro.org>
Cc: Lukasz Luba <lukasz.luba@....com>, LKML <linux-kernel@...r.kernel.org>,
Stanislaw Gruszka <stanislaw.gruszka@...ux.intel.com>,
Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>, Zhang Rui <rui.zhang@...el.com>,
netdev@...r.kernel.org, Ido Schimmel <idosch@...dia.com>, Petr Machata <petrm@...dia.com>,
Miri Korenblit <miriam.rachel.korenblit@...el.com>, linux-wireless@...r.kernel.org,
Shawn Guo <shawnguo@...nel.org>, Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Manaf Meethalavalappu Pallikunhi <quic_manafm@...cinc.com>
Subject: Re: [PATCH v2.1 2/9] thermal: core: Add flags to struct thermal_trip
On Thu, Feb 22, 2024 at 8:48 PM Rafael J. Wysocki <rjw@...ysocki.net> wrote:
>
> From: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
>
> In order to allow thermal zone creators to specify the writability of
> trip point temperature and hysteresis on a per-trip basis, add a flags
> field to struct thermal_trip and define flags to represent the desired
> trip properties.
>
> Also make thermal_zone_device_register_with_trips() set the
> THERMAL_TRIP_FLAG_RW_TEMP flag for all trips covered by the writable
> trips mask passed to it and modify the thermal sysfs code to look at
> the trip flags instead of using the writable trips mask directly or
> checking the presence of the .set_trip_hyst() zone callback.
>
> Additionally, make trip_point_temp_store() and trip_point_hyst_store()
> fail with an error code if the trip passed to one of them has
> THERMAL_TRIP_FLAG_RW_TEMP or THERMAL_TRIP_FLAG_RW_HYST,
> respectively, clear in its flags.
>
> No intentional functional impact.
>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
AFAICS this patch addresses all of the review comments and because the
rest of the series (depending on it) has been approved, I'm applying
the whole series including this patch.
> ---
>
> v2 -> v2.1:
> * Don't add redundant checks in 3 places (Daniel).
> * Define THERMAL_TRIP_FLAG_RW as the combination of the _RW_ trip flags (Daniel).
>
> v1 -> v2:
> * Rename trip flags (Stanislaw).
>
> ---
> drivers/thermal/thermal_core.c | 9 ++++++++-
> drivers/thermal/thermal_core.h | 2 +-
> drivers/thermal/thermal_sysfs.c | 18 +++++++++---------
> include/linux/thermal.h | 8 ++++++++
> 4 files changed, 26 insertions(+), 11 deletions(-)
>
> Index: linux-pm/include/linux/thermal.h
> ===================================================================
> --- linux-pm.orig/include/linux/thermal.h
> +++ linux-pm/include/linux/thermal.h
> @@ -64,15 +64,23 @@ enum thermal_notify_event {
> * @threshold: trip crossing notification threshold miliCelsius
> * @type: trip point type
> * @priv: pointer to driver data associated with this trip
> + * @flags: flags representing binary properties of the trip
> */
> struct thermal_trip {
> int temperature;
> int hysteresis;
> int threshold;
> enum thermal_trip_type type;
> + u8 flags;
> void *priv;
> };
>
> +#define THERMAL_TRIP_FLAG_RW_TEMP BIT(0)
> +#define THERMAL_TRIP_FLAG_RW_HYST BIT(1)
> +
> +#define THERMAL_TRIP_FLAG_RW (THERMAL_TRIP_FLAG_RW_TEMP | \
> + THERMAL_TRIP_FLAG_RW_HYST)
> +
> struct thermal_zone_device_ops {
> int (*bind) (struct thermal_zone_device *,
> struct thermal_cooling_device *);
> Index: linux-pm/drivers/thermal/thermal_core.c
> ===================================================================
> --- linux-pm.orig/drivers/thermal/thermal_core.c
> +++ linux-pm/drivers/thermal/thermal_core.c
> @@ -1278,6 +1278,7 @@ thermal_zone_device_register_with_trips(
> int passive_delay, int polling_delay)
> {
> struct thermal_zone_device *tz;
> + struct thermal_trip *trip;
> int id;
> int result;
> struct thermal_governor *governor;
> @@ -1356,13 +1357,19 @@ thermal_zone_device_register_with_trips(
> tz->devdata = devdata;
> memcpy(tz->trips, trips, num_trips * sizeof(*trips));
> tz->num_trips = num_trips;
> + for_each_trip(tz, trip) {
> + if (mask & 1)
> + trip->flags |= THERMAL_TRIP_FLAG_RW_TEMP;
> +
> + mask >>= 1;
> + }
>
> thermal_set_delay_jiffies(&tz->passive_delay_jiffies, passive_delay);
> thermal_set_delay_jiffies(&tz->polling_delay_jiffies, polling_delay);
>
> /* sys I/F */
> /* Add nodes that are always present via .groups */
> - result = thermal_zone_create_device_groups(tz, mask);
> + result = thermal_zone_create_device_groups(tz);
> if (result)
> goto remove_id;
>
> Index: linux-pm/drivers/thermal/thermal_core.h
> ===================================================================
> --- linux-pm.orig/drivers/thermal/thermal_core.h
> +++ linux-pm/drivers/thermal/thermal_core.h
> @@ -131,7 +131,7 @@ void thermal_zone_trip_updated(struct th
> int __thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp);
>
> /* sysfs I/F */
> -int thermal_zone_create_device_groups(struct thermal_zone_device *, int);
> +int thermal_zone_create_device_groups(struct thermal_zone_device *tz);
> void thermal_zone_destroy_device_groups(struct thermal_zone_device *);
> void thermal_cooling_device_setup_sysfs(struct thermal_cooling_device *);
> void thermal_cooling_device_destroy_sysfs(struct thermal_cooling_device *cdev);
> Index: linux-pm/drivers/thermal/thermal_sysfs.c
> ===================================================================
> --- linux-pm.orig/drivers/thermal/thermal_sysfs.c
> +++ linux-pm/drivers/thermal/thermal_sysfs.c
> @@ -392,17 +392,16 @@ static const struct attribute_group *the
> /**
> * create_trip_attrs() - create attributes for trip points
> * @tz: the thermal zone device
> - * @mask: Writeable trip point bitmap.
> *
> * helper function to instantiate sysfs entries for every trip
> * point and its properties of a struct thermal_zone_device.
> *
> * Return: 0 on success, the proper error value otherwise.
> */
> -static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
> +static int create_trip_attrs(struct thermal_zone_device *tz)
> {
> + const struct thermal_trip *trip;
> struct attribute **attrs;
> - int indx;
>
> /* This function works only for zones with at least one trip */
> if (tz->num_trips <= 0)
> @@ -437,7 +436,9 @@ static int create_trip_attrs(struct ther
> return -ENOMEM;
> }
>
> - for (indx = 0; indx < tz->num_trips; indx++) {
> + for_each_trip(tz, trip) {
> + int indx = thermal_zone_trip_id(tz, trip);
> +
> /* create trip type attribute */
> snprintf(tz->trip_type_attrs[indx].name, THERMAL_NAME_LENGTH,
> "trip_point_%d_type", indx);
> @@ -458,7 +459,7 @@ static int create_trip_attrs(struct ther
> tz->trip_temp_attrs[indx].name;
> tz->trip_temp_attrs[indx].attr.attr.mode = S_IRUGO;
> tz->trip_temp_attrs[indx].attr.show = trip_point_temp_show;
> - if (mask & (1 << indx)) {
> + if (trip->flags & THERMAL_TRIP_FLAG_RW_TEMP) {
> tz->trip_temp_attrs[indx].attr.attr.mode |= S_IWUSR;
> tz->trip_temp_attrs[indx].attr.store =
> trip_point_temp_store;
> @@ -473,7 +474,7 @@ static int create_trip_attrs(struct ther
> tz->trip_hyst_attrs[indx].name;
> tz->trip_hyst_attrs[indx].attr.attr.mode = S_IRUGO;
> tz->trip_hyst_attrs[indx].attr.show = trip_point_hyst_show;
> - if (tz->ops.set_trip_hyst) {
> + if (trip->flags & THERMAL_TRIP_FLAG_RW_HYST) {
> tz->trip_hyst_attrs[indx].attr.attr.mode |= S_IWUSR;
> tz->trip_hyst_attrs[indx].attr.store =
> trip_point_hyst_store;
> @@ -505,8 +506,7 @@ static void destroy_trip_attrs(struct th
> kfree(tz->trips_attribute_group.attrs);
> }
>
> -int thermal_zone_create_device_groups(struct thermal_zone_device *tz,
> - int mask)
> +int thermal_zone_create_device_groups(struct thermal_zone_device *tz)
> {
> const struct attribute_group **groups;
> int i, size, result;
> @@ -522,7 +522,7 @@ int thermal_zone_create_device_groups(st
> groups[i] = thermal_zone_attribute_groups[i];
>
> if (tz->num_trips) {
> - result = create_trip_attrs(tz, mask);
> + result = create_trip_attrs(tz);
> if (result) {
> kfree(groups);
>
>
>
>
>
Powered by blists - more mailing lists