lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <b008615006418ae7bc52db9e8d54b18fcf565856.camel@intel.com>
Date: Thu, 29 Feb 2024 08:28:47 +0000
From: "Liu, Yujie" <yujie.liu@...el.com>
To: "idosch@...dia.com" <idosch@...dia.com>, "netdev@...r.kernel.org"
	<netdev@...r.kernel.org>, "linux-kselftest@...r.kernel.org"
	<linux-kselftest@...r.kernel.org>
CC: "shuah@...nel.org" <shuah@...nel.org>, "edumazet@...gle.com"
	<edumazet@...gle.com>, "davem@...emloft.net" <davem@...emloft.net>,
	"kuba@...nel.org" <kuba@...nel.org>, "pabeni@...hat.com" <pabeni@...hat.com>
Subject: Re: [PATCH net-next] selftests: vxlan_mdb: Avoid duplicate test names

Hi Ido,

On Tue, 2024-02-27 at 19:04 +0200, Ido Schimmel wrote:
> Rename some test cases to avoid overlapping test names which is
> problematic for the kernel test robot. No changes in the test's
> logic.
> 
> Suggested-by: Yujie Liu <yujie.liu@...el.com>
> Signed-off-by: Ido Schimmel <idosch@...dia.com>
> ---
> Yujie Liu, please verify this works for you.

This patch works well in the kernel test robot. Now there is no problem
of overlapping test names. Thanks.

Tested-by: Yujie Liu <yujie.liu@...el.com>

# Control path: Flush
# -------------------
# TEST: Flush all                                                     [ OK ]
# TEST: Flush by port - matching                                      [ OK ]
# TEST: Flush by port - non-matching                                  [ OK ]
# TEST: Flush by source VNI - matching                                [ OK ]
# TEST: Flush by source VNI - non-matching                            [ OK ]
# TEST: Flush by "permanent" state                                    [ OK ]
# TEST: Flush by "nopermanent" state                                  [ OK ]
# TEST: Flush by routing protocol - matching                          [ OK ]
# TEST: Flush by routing protocol - non-matching                      [ OK ]
# TEST: Flush by IPv4 destination IP - matching                       [ OK ]
# TEST: Flush by IPv4 destination IP - non-matching                   [ OK ]
# TEST: Flush by IPv6 destination IP - matching                       [ OK ]
# TEST: Flush by IPv6 destination IP - non-matching                   [ OK ]
# TEST: Flush by UDP destination port - matching                      [ OK ]
# TEST: Flush by UDP destination port - non-matching                  [ OK ]
# TEST: Flush by device's UDP destination port - matching             [ OK ]
# TEST: Flush by device's UDP destination port - non-matching         [ OK ]
# TEST: Flush by destination VNI - matching                           [ OK ]
# TEST: Flush by destination VNI - non-matching                       [ OK ]
# TEST: Flush by destination VNI equal to source VNI - matching       [ OK ]
# TEST: Flush by destination VNI equal to source VNI - non-matching   [ OK ]
# TEST: Flush by VLAN ID                                              [ OK ]

> ---
>  tools/testing/selftests/net/test_vxlan_mdb.sh | 36 +++++++++----------
>  1 file changed, 18 insertions(+), 18 deletions(-)
> 
> diff --git a/tools/testing/selftests/net/test_vxlan_mdb.sh b/tools/testing/selftests/net/test_vxlan_mdb.sh
> index 84a05a9e46d8..74ff9fb2a6f0 100755
> --- a/tools/testing/selftests/net/test_vxlan_mdb.sh
> +++ b/tools/testing/selftests/net/test_vxlan_mdb.sh
> @@ -1014,10 +1014,10 @@ flush()
>  
>         run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 port vx0"
>         run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010"
> -       log_test $? 254 "Flush by port"
> +       log_test $? 254 "Flush by port - matching"
>  
>         run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 port veth0"
> -       log_test $? 255 "Flush by wrong port"
> +       log_test $? 255 "Flush by port - non-matching"
>  
>         # Check that when flushing by source VNI only entries programmed with
>         # the specified source VNI are flushed and the rest are not.
> @@ -1030,9 +1030,9 @@ flush()
>         run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 src_vni 10010"
>  
>         run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010"
> -       log_test $? 254 "Flush by specified source VNI"
> +       log_test $? 254 "Flush by source VNI - matching"
>         run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10011"
> -       log_test $? 0 "Flush by unspecified source VNI"
> +       log_test $? 0 "Flush by source VNI - non-matching"
>  
>         run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"
>  
> @@ -1058,9 +1058,9 @@ flush()
>         run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 proto bgp"
>  
>         run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \"proto bgp\""
> -       log_test $? 1 "Flush by specified routing protocol"
> +       log_test $? 1 "Flush by routing protocol - matching"
>         run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \"proto zebra\""
> -       log_test $? 0 "Flush by unspecified routing protocol"
> +       log_test $? 0 "Flush by routing protocol - non-matching"
>  
>         run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"
>  
> @@ -1075,9 +1075,9 @@ flush()
>         run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst 198.51.100.2"
>  
>         run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.2"
> -       log_test $? 1 "Flush by specified destination IP - IPv4"
> +       log_test $? 1 "Flush by IPv4 destination IP - matching"
>         run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.1"
> -       log_test $? 0 "Flush by unspecified destination IP - IPv4"
> +       log_test $? 0 "Flush by IPv4 destination IP - non-matching"
>  
>         run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"
>  
> @@ -1089,9 +1089,9 @@ flush()
>         run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst 2001:db8:1000::2"
>  
>         run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 2001:db8:1000::2"
> -       log_test $? 1 "Flush by specified destination IP - IPv6"
> +       log_test $? 1 "Flush by IPv6 destination IP - matching"
>         run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 2001:db8:1000::1"
> -       log_test $? 0 "Flush by unspecified destination IP - IPv6"
> +       log_test $? 0 "Flush by IPv6 destination IP - non-matching"
>  
>         run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"
>  
> @@ -1104,9 +1104,9 @@ flush()
>         run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst_port 11111"
>  
>         run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \"dst_port 11111\""
> -       log_test $? 1 "Flush by specified UDP destination port"
> +       log_test $? 1 "Flush by UDP destination port - matching"
>         run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \"dst_port 22222\""
> -       log_test $? 0 "Flush by unspecified UDP destination port"
> +       log_test $? 0 "Flush by UDP destination port - non-matching"
>  
>         run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"
>  
> @@ -1121,9 +1121,9 @@ flush()
>         run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst_port 4789"
>  
>         run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.1"
> -       log_test $? 1 "Flush by device's UDP destination port"
> +       log_test $? 1 "Flush by device's UDP destination port - matching"
>         run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.2"
> -       log_test $? 0 "Flush by unspecified UDP destination port"
> +       log_test $? 0 "Flush by device's UDP destination port - non-matching"
>  
>         run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"
>  
> @@ -1136,9 +1136,9 @@ flush()
>         run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 vni 20010"
>  
>         run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \" vni 20010\""
> -       log_test $? 1 "Flush by specified destination VNI"
> +       log_test $? 1 "Flush by destination VNI - matching"
>         run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \" vni 20011\""
> -       log_test $? 0 "Flush by unspecified destination VNI"
> +       log_test $? 0 "Flush by destination VNI - non-matching"
>  
>         run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"
>  
> @@ -1153,9 +1153,9 @@ flush()
>         run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 vni 10010"
>  
>         run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.1"
> -       log_test $? 1 "Flush by destination VNI equal to source VNI"
> +       log_test $? 1 "Flush by destination VNI equal to source VNI - matching"
>         run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.2"
> -       log_test $? 0 "Flush by unspecified destination VNI"
> +       log_test $? 0 "Flush by destination VNI equal to source VNI - non-matching"
>  
>         run_cmd "bridge -n $ns1_v4 mdb flush dev vx0"
>  

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ