[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id:
<20240301-for-netnext-mt7530-improvements-3-v3-0-449f4f166454@arinc9.com>
Date: Fri, 01 Mar 2024 12:42:56 +0200
From: Arınç ÜNAL via B4 Relay
<devnull+arinc.unal.arinc9.com@...nel.org>
To: Daniel Golle <daniel@...rotopia.org>, DENG Qingfang <dqfext@...il.com>,
Sean Wang <sean.wang@...iatek.com>, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
Russell King <linux@...linux.org.uk>
Cc: mithat.guner@...ont.com, erkin.bozoglu@...ont.com,
Bartel Eerdekens <bartel.eerdekens@...stell8.be>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
Arınç ÜNAL <arinc.unal@...nc9.com>
Subject: [PATCH net-next v3 0/9] MT7530 DSA Subdriver Improvements Act III
Hello!
This is the third patch series with the goal of simplifying the MT7530 DSA
subdriver and improving support for MT7530, MT7531, and the switch on the
MT7988 SoC.
I have done a simple ping test to confirm basic communication on all switch
ports on MCM and standalone MT7530, and MT7531 switch with this patch
series applied.
MT7621 Unielec, MCM MT7530:
rgmii-only-gmac0-mt7621-unielec-u7621-06-16m.dtb
gmac0-and-gmac1-mt7621-unielec-u7621-06-16m.dtb
tftpboot 0x80008000 mips-uzImage.bin; tftpboot 0x83000000 mips-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootm 0x80008000 0x83000000 0x83f00000
MT7622 Bananapi, MT7531:
gmac0-and-gmac1-mt7622-bananapi-bpi-r64.dtb
tftpboot 0x40000000 arm64-Image; tftpboot 0x45000000 arm64-rootfs.cpio.uboot; tftpboot 0x4a000000 $dtb; booti 0x40000000 0x45000000 0x4a000000
MT7623 Bananapi, standalone MT7530:
rgmii-only-gmac0-mt7623n-bananapi-bpi-r2.dtb
gmac0-and-gmac1-mt7623n-bananapi-bpi-r2.dtb
tftpboot 0x80008000 arm-zImage; tftpboot 0x83000000 arm-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootz 0x80008000 0x83000000 0x83f00000
This patch series is the continuation of the patch series linked below.
https://lore.kernel.org/r/20230522121532.86610-1-arinc.unal@arinc9.com
Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
---
Changes in v3:
- Patch 8
- Explain properly the behaviour of setting link down on all ports at
setup.
- Split the changes for simplifying the link settings operations out to
another patch.
- Link to v2: https://lore.kernel.org/r/20240216-for-netnext-mt7530-improvements-3-v2-0-094cae3ff23b@arinc9.com
Changes in v2:
- Patch 8
- Use a single mt7530_rmw() instead of two mt7530_clear() and
mt7530_set() commands.
- Link to v1: https://lore.kernel.org/r/20240208-for-netnext-mt7530-improvements-3-v1-0-d7c1cfd502ca@arinc9.com
---
Arınç ÜNAL (9):
net: dsa: mt7530: remove .mac_port_config for MT7988 and make it optional
net: dsa: mt7530: set interrupt register only for MT7530
net: dsa: mt7530: do not use SW_PHY_RST to reset MT7531 switch
net: dsa: mt7530: get rid of useless error returns on phylink code path
net: dsa: mt7530: get rid of priv->info->cpu_port_config()
net: dsa: mt7530: get rid of mt753x_mac_config()
net: dsa: mt7530: put initialising PCS devices code back to original order
net: dsa: mt7530: sort link settings ops and force link down on all ports
net: dsa: mt7530: simplify link operations
drivers/net/dsa/mt7530.c | 259 ++++++++---------------------------------------
drivers/net/dsa/mt7530.h | 19 +---
2 files changed, 47 insertions(+), 231 deletions(-)
---
base-commit: b6b614558ed5b2ca50edacc0f2fbf5f52158c86c
change-id: 20240131-for-netnext-mt7530-improvements-3-a8ac49d4f7c2
Best regards,
--
Arınç ÜNAL <arinc.unal@...nc9.com>
Powered by blists - more mailing lists