[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240301-rxc_bugfix-v5-3-8dac30230050@bootlin.com>
Date: Fri, 01 Mar 2024 16:35:00 +0100
From: Romain Gantois <romain.gantois@...tlin.com>
To: Russell King <linux@...linux.org.uk>, Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Clément Léger <clement.leger@...tlin.com>
Cc: Maxime Chevallier <maxime.chevallier@...tlin.com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>, netdev@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-renesas-soc@...r.kernel.org,
Romain Gantois <romain.gantois@...tlin.com>
Subject: [PATCH net-next v5 3/7] net: stmmac: don't rely on lynx_pcs
presence to check for a PHY
From: Maxime Chevallier <maxime.chevallier@...tlin.com>
When initializing attached PHYs, there are some cases where we don't expect
any PHY to be connected. The logic uses conditions based on various local
PCS configuration, but also calls-in phylink_expects_phy() via
stmmac_init_phy(), which is enough to ensure we don't try to initialize a
PHY when using a Lynx PCS, as long as we have the phy_interface set to a
802.3z mode and are using inband negociation.
Drop the lynx check, making the stmmac generic code more pcs_lynx-agnostic.
Signed-off-by: Maxime Chevallier <maxime.chevallier@...tlin.com>
[rgantois: commit log]
Signed-off-by: Romain Gantois <romain.gantois@...tlin.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 24cd80490d19..d78c625d33eb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3960,8 +3960,7 @@ static int __stmmac_open(struct net_device *dev,
if (priv->hw->pcs != STMMAC_PCS_TBI &&
priv->hw->pcs != STMMAC_PCS_RTBI &&
(!priv->hw->xpcs ||
- xpcs_get_an_mode(priv->hw->xpcs, mode) != DW_AN_C73) &&
- !priv->hw->lynx_pcs) {
+ xpcs_get_an_mode(priv->hw->xpcs, mode) != DW_AN_C73)) {
ret = stmmac_init_phy(dev);
if (ret) {
netdev_err(priv->dev,
--
2.43.2
Powered by blists - more mailing lists