| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240301011119.3267-1-witu@nvidia.com>
Date: Fri, 1 Mar 2024 03:11:18 +0200
From: William Tu <witu@...dia.com>
To: <netdev@...r.kernel.org>
CC: <jiri@...dia.com>, <bodong@...dia.com>, <tariqt@...dia.com>,
<yossiku@...dia.com>, <kuba@...nel.org>, <witu@...dia.com>
Subject: [PATCH RFC v2 net-next 1/2] devlink: Add shared descriptor eswitch attr
Add two eswitch attrs: shrdesc_mode and shrdesc_count.
1. shrdesc_mode: to enable a sharing memory buffer for
representor's rx buffer, and 2. shrdesc_count: to control the
number of buffers in this shared memory pool.
When using switchdev mode, the representor ports handles the slow path
traffic, the traffic that can't be offloaded will be redirected to the
representor port for processing. Memory consumption of the representor
port's rx buffer can grow to several GB when scaling to 1k VFs reps.
For example, in mlx5 driver, each RQ, with a typical 1K descriptors,
consumes 3MB of DMA memory for packet buffer in WQEs, and with four
channels, it consumes 4 * 3MB * 1024 = 12GB of memory. And since rep
ports are for slow path traffic, most of these rx DMA memory are idle.
Add shrdesc_mode configuration, allowing multiple representors
to share a rx memory buffer pool. When enabled, individual representor
doesn't need to allocate its dedicated rx buffer, but just pointing
its rq to the memory pool. This could make the memory being better
utilized. The shrdesc_count represents the number of rx ring
entries, e.g., same meaning as ethtool -g, that's shared across other
representors. Users adjust it based on how many reps, total system
memory, or performance expectation.
The two params are also useful for other vendors such as Intel ICE
drivers and Broadcom's driver, which also have representor ports for
slow path traffic.
An example use case:
$ devlink dev eswitch show pci/0000:08:00.0
pci/0000:08:00.0: mode legacy inline-mode none encap-mode basic \
shrdesc-mode none shrdesc-count 0
$ devlink dev eswitch set pci/0000:08:00.0 mode switchdev \
shrdesc-mode basic shrdesc-count 1024
$ devlink dev eswitch show pci/0000:08:00.0
pci/0000:08:00.0: mode switchdev inline-mode none encap-mode basic \
shrdesc-mode basic shrdesc-count 1024
Note that new configurations are set at legacy mode, and enabled at
switchdev mode.
Signed-off-by: William Tu <witu@...dia.com>
---
v2: feedback from Simon and Jiri
- adding devlink.yaml, generate using ynl-regen.sh
---
Documentation/netlink/specs/devlink.yaml | 17 ++++++++++
include/net/devlink.h | 8 +++++
include/uapi/linux/devlink.h | 7 ++++
net/devlink/dev.c | 43 ++++++++++++++++++++++++
net/devlink/netlink_gen.c | 6 ++--
5 files changed, 79 insertions(+), 2 deletions(-)
diff --git a/Documentation/netlink/specs/devlink.yaml b/Documentation/netlink/specs/devlink.yaml
index cf6eaa0da821..58f31d99b8b3 100644
--- a/Documentation/netlink/specs/devlink.yaml
+++ b/Documentation/netlink/specs/devlink.yaml
@@ -119,6 +119,14 @@ definitions:
name: none
-
name: basic
+ -
+ type: enum
+ name: eswitch-shrdesc-mode
+ entries:
+ -
+ name: none
+ -
+ name: basic
-
type: enum
name: dpipe-header-id
@@ -429,6 +437,13 @@ attribute-sets:
name: eswitch-encap-mode
type: u8
enum: eswitch-encap-mode
+ -
+ name: eswitch-shrdesc-mode
+ type: u8
+ enum: eswitch-shrdesc-mode
+ -
+ name: eswitch-shrdesc-count
+ type: u32
-
name: resource-list
type: nest
@@ -1555,6 +1570,8 @@ operations:
- eswitch-mode
- eswitch-inline-mode
- eswitch-encap-mode
+ - eswitch-shrdesc-mode
+ - eswitch-shrdesc-count
-
name: eswitch-set
diff --git a/include/net/devlink.h b/include/net/devlink.h
index 9ac394bdfbe4..aca25183e72a 100644
--- a/include/net/devlink.h
+++ b/include/net/devlink.h
@@ -1327,6 +1327,14 @@ struct devlink_ops {
int (*eswitch_encap_mode_set)(struct devlink *devlink,
enum devlink_eswitch_encap_mode encap_mode,
struct netlink_ext_ack *extack);
+ int (*eswitch_shrdesc_mode_get)(struct devlink *devlink,
+ enum devlink_eswitch_shrdesc_mode *p_shrdesc_mode);
+ int (*eswitch_shrdesc_mode_set)(struct devlink *devlink,
+ enum devlink_eswitch_shrdesc_mode shrdesc_mode,
+ struct netlink_ext_ack *extack);
+ int (*eswitch_shrdesc_count_get)(struct devlink *devlink, int *count);
+ int (*eswitch_shrdesc_count_set)(struct devlink *devlink, int count,
+ struct netlink_ext_ack *extack);
int (*info_get)(struct devlink *devlink, struct devlink_info_req *req,
struct netlink_ext_ack *extack);
/**
diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h
index 130cae0d3e20..31323c481614 100644
--- a/include/uapi/linux/devlink.h
+++ b/include/uapi/linux/devlink.h
@@ -195,6 +195,11 @@ enum devlink_eswitch_encap_mode {
DEVLINK_ESWITCH_ENCAP_MODE_BASIC,
};
+enum devlink_eswitch_shrdesc_mode {
+ DEVLINK_ESWITCH_SHRDESC_MODE_NONE,
+ DEVLINK_ESWITCH_SHRDESC_MODE_BASIC,
+};
+
enum devlink_port_flavour {
DEVLINK_PORT_FLAVOUR_PHYSICAL, /* Any kind of a port physically
* facing the user.
@@ -614,6 +619,8 @@ enum devlink_attr {
DEVLINK_ATTR_REGION_DIRECT, /* flag */
+ DEVLINK_ATTR_ESWITCH_SHRDESC_MODE, /* u8 */
+ DEVLINK_ATTR_ESWITCH_SHRDESC_COUNT, /* u32 */
/* add new attributes above here, update the policy in devlink.c */
__DEVLINK_ATTR_MAX,
diff --git a/net/devlink/dev.c b/net/devlink/dev.c
index 19dbf540748a..90b279c3c1e6 100644
--- a/net/devlink/dev.c
+++ b/net/devlink/dev.c
@@ -631,8 +631,10 @@ static int devlink_nl_eswitch_fill(struct sk_buff *msg, struct devlink *devlink,
enum devlink_command cmd, u32 portid,
u32 seq, int flags)
{
+ enum devlink_eswitch_shrdesc_mode shrdesc_mode;
const struct devlink_ops *ops = devlink->ops;
enum devlink_eswitch_encap_mode encap_mode;
+ u32 shrdesc_count;
u8 inline_mode;
void *hdr;
int err = 0;
@@ -674,6 +676,25 @@ static int devlink_nl_eswitch_fill(struct sk_buff *msg, struct devlink *devlink,
goto nla_put_failure;
}
+ if (ops->eswitch_shrdesc_mode_get) {
+ err = ops->eswitch_shrdesc_mode_get(devlink, &shrdesc_mode);
+ if (err)
+ goto nla_put_failure;
+ err = nla_put_u8(msg, DEVLINK_ATTR_ESWITCH_SHRDESC_MODE, shrdesc_mode);
+ if (err)
+ goto nla_put_failure;
+
+ }
+
+ if (ops->eswitch_shrdesc_count_get) {
+ err = ops->eswitch_shrdesc_count_get(devlink, &shrdesc_count);
+ if (err)
+ goto nla_put_failure;
+ err = nla_put_u32(msg, DEVLINK_ATTR_ESWITCH_SHRDESC_COUNT, shrdesc_count);
+ if (err)
+ goto nla_put_failure;
+ }
+
genlmsg_end(msg, hdr);
return 0;
@@ -705,9 +726,11 @@ int devlink_nl_eswitch_get_doit(struct sk_buff *skb, struct genl_info *info)
int devlink_nl_eswitch_set_doit(struct sk_buff *skb, struct genl_info *info)
{
+ enum devlink_eswitch_shrdesc_mode shrdesc_mode;
struct devlink *devlink = info->user_ptr[0];
const struct devlink_ops *ops = devlink->ops;
enum devlink_eswitch_encap_mode encap_mode;
+ u32 shrdesc_count;
u8 inline_mode;
int err = 0;
u16 mode;
@@ -744,6 +767,26 @@ int devlink_nl_eswitch_set_doit(struct sk_buff *skb, struct genl_info *info)
return err;
}
+ if (info->attrs[DEVLINK_ATTR_ESWITCH_SHRDESC_MODE]) {
+ if (!ops->eswitch_shrdesc_mode_set)
+ return -EOPNOTSUPP;
+ shrdesc_mode = nla_get_u8(info->attrs[DEVLINK_ATTR_ESWITCH_SHRDESC_MODE]);
+ err = ops->eswitch_shrdesc_mode_set(devlink, shrdesc_mode,
+ info->extack);
+ if (err)
+ return err;
+ }
+
+ if (info->attrs[DEVLINK_ATTR_ESWITCH_SHRDESC_COUNT]) {
+ if (!ops->eswitch_shrdesc_count_set)
+ return -EOPNOTSUPP;
+ shrdesc_count = nla_get_u32(info->attrs[DEVLINK_ATTR_ESWITCH_SHRDESC_COUNT]);
+ err = ops->eswitch_shrdesc_count_set(devlink, shrdesc_count,
+ info->extack);
+ if (err)
+ return err;
+ }
+
return 0;
}
diff --git a/net/devlink/netlink_gen.c b/net/devlink/netlink_gen.c
index c81cf2dd154f..9346505a03d5 100644
--- a/net/devlink/netlink_gen.c
+++ b/net/devlink/netlink_gen.c
@@ -194,12 +194,14 @@ static const struct nla_policy devlink_eswitch_get_nl_policy[DEVLINK_ATTR_DEV_NA
};
/* DEVLINK_CMD_ESWITCH_SET - do */
-static const struct nla_policy devlink_eswitch_set_nl_policy[DEVLINK_ATTR_ESWITCH_ENCAP_MODE + 1] = {
+static const struct nla_policy devlink_eswitch_set_nl_policy[DEVLINK_ATTR_ESWITCH_SHRDESC_COUNT + 1] = {
[DEVLINK_ATTR_BUS_NAME] = { .type = NLA_NUL_STRING, },
[DEVLINK_ATTR_DEV_NAME] = { .type = NLA_NUL_STRING, },
[DEVLINK_ATTR_ESWITCH_MODE] = NLA_POLICY_MAX(NLA_U16, 1),
[DEVLINK_ATTR_ESWITCH_INLINE_MODE] = NLA_POLICY_MAX(NLA_U16, 3),
[DEVLINK_ATTR_ESWITCH_ENCAP_MODE] = NLA_POLICY_MAX(NLA_U8, 1),
+ [DEVLINK_ATTR_ESWITCH_SHRDESC_MODE] = NLA_POLICY_MAX(NLA_U8, 1),
+ [DEVLINK_ATTR_ESWITCH_SHRDESC_COUNT] = { .type = NLA_U32, },
};
/* DEVLINK_CMD_DPIPE_TABLE_GET - do */
@@ -787,7 +789,7 @@ const struct genl_split_ops devlink_nl_ops[74] = {
.doit = devlink_nl_eswitch_set_doit,
.post_doit = devlink_nl_post_doit,
.policy = devlink_eswitch_set_nl_policy,
- .maxattr = DEVLINK_ATTR_ESWITCH_ENCAP_MODE,
+ .maxattr = DEVLINK_ATTR_ESWITCH_SHRDESC_COUNT,
.flags = GENL_ADMIN_PERM | GENL_CMD_CAP_DO,
},
{
--
2.38.1
Powered by blists - more mailing lists